Introduction
Thank you for choosing the ASD LED 32 Inch Oval Flush Mount Light Fixture. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
This fixture is designed for use in dry and damp locations. Do not install in wet locations. Ensure all connections are secure and properly insulated. Do not exceed the specified voltage range of 100-277V.
Product Features
- Bright & Powerful: Equipped with energy-efficient 45W LEDs, delivering 3750 lumens of illumination.
- Tunable Light (3CCT): Offers three selectable color temperatures (3000K warm white, 4000K cool white, 5000K daylight) to customize your lighting ambiance.
- Smooth Dimming: Features flicker-free Triac dimming, allowing brightness adjustment from 10% to 100% with compatible dimmer switches.
- Multi-Voltage Operation: Operates efficiently within a 100-277V range, ensuring stable performance.
- Long Lifespan: Engineered for longevity with an average life of 50,000 hours, providing dependable lighting for over 50 years under normal use.
- Certified Quality: ETL and Energy Star certified, complying with stringent safety and energy standards.
- Durable Design: Constructed with a durable alloy steel housing, frosted acrylic shade, and solid metal base, resistant to rust and impacts.
Figure 1: Key Features of the ASD LED Light Fixture.
Figure 2: 3CCT Color Temperature Options.
Installation Instructions
Tools Required: Screwdriver, Wire Strippers, Drill (if anchors are needed).
Important: Before starting installation, ensure the power supply to the fixture location is turned off at the circuit breaker or fuse box.
- Prepare the Fixture: Unscrew the cap nuts counter-clockwise and carefully remove the metal ring and the lens from the fixture.
- Attach Mounting Plate: Attach the mounting plate to the outlet box using two screws. If necessary, use the mounting plate as a template to mark the location for wall anchors. Drill appropriate sized holes for anchors, insert anchors, and then secure the self-tapping screws into the anchors.
- Connect Wiring: Connect the electrical wires: Black to Black (Live), White to White (Neutral), and Ground to Ground (Bare Copper or Green). Secure connections with wire nuts. Carefully tuck all wires back into the outlet box.
- Secure Fixture & Select CCT: Feed the self-tapping screws through the keyhole slots on the fixture's back plate and tighten them to secure the fixture to the mounting plate. Before fully securing, locate the CCT switch on the fixture and choose your desired color temperature (3000K, 4000K, or 5000K). Once the CCT is selected, secure the lens and metal ring to the fixture pan using the cap nuts.
Figure 3: Installation Steps.
For a full cut sheet and detailed installation guide, please refer to the official PDF manual: ASD LED Flush Mount Manual (PDF)
Operating Instructions
Once installed and powered, the light fixture can be operated using a standard wall switch. If a compatible Triac dimmer switch is installed, you can adjust the brightness from 10% to 100% by manipulating the dimmer control. The color temperature is set via a switch on the fixture itself during installation and cannot be changed without accessing the fixture.
Maintenance
The ASD LED Flush Mount Light Fixture requires minimal maintenance. To clean the fixture, ensure the power is off and allow it to cool. Wipe the exterior surfaces with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Incorrect wiring. Faulty switch. | Check circuit breaker/fuse. Verify wiring connections. Test or replace switch. |
| Light flickers or dims unexpectedly. | Incompatible dimmer switch. Loose wiring connection. Voltage fluctuations. | Ensure dimmer is Triac compatible. Check and secure all wiring. Verify stable power supply (100-277V). |
| Light output is too low/high. | Dimmer setting. Incorrect CCT selection. | Adjust dimmer to desired level. Re-check CCT switch setting on fixture (requires re-accessing fixture). |
Specifications
| Attribute | Detail |
|---|---|
| Brand | ASD |
| Model Name | LED Double Ring Flushmount |
| Item Model Number | A-LFMOV-M32D45C-N-2p |
| Color | Brushed Nickel (2pk) |
| Material | Durable Alloy Steel Housing, Frosted Acrylic Shade, Matte White Diffuser Cover, Solid Metal Base |
| Product Dimensions | 32.44"L x 18.13"W x 4.81"H |
| Light Source Type | LED |
| Wattage | 45 watts |
| Brightness | 3750 Lumen |
| Light Color | 3000K/4000K/5000K (CCT Adjustable) |
| Voltage | 100-277 Volts |
| Dimmable | Yes (Triac Dimming) |
| Average Life | 50,000 Hours |
| Certification | ETL, Energy Star, cETL |
| Indoor/Outdoor Usage | Indoor (Damp Locations Rated) |
| Item Weight | 7.8 Pounds |
| Included Components | Light Fixture, Mounting Plate, Screws, Anchors, Wire Nuts |
Figure 4: Product Specification Diagram.
Warranty and Support
This ASD LED Flush Mount Light Fixture is covered by a 5-Year Manufacturer's Warranty. This warranty ensures quality, safety, and a positive user experience. For any questions, technical assistance, or warranty claims, please contact ASD customer support. Contact information can typically be found on the product packaging or the official ASD Lighting website.
Figure 5: Warranty and Certifications.
Product Application Examples
Figure 6: Versatile Applications of the Light Fixture.
