SONGMICS 4-Tier Stackable Metal Shoe Rack Instruction Manual

1. Introduction

Thank you for choosing the SONGMICS 4-Tier Stackable Metal Shoe Rack. This manual provides essential information for the safe assembly, operation, and maintenance of your new shoe rack. Please read these instructions carefully before use and retain them for future reference.

This robust shoe organizer is designed to provide efficient storage for your footwear, capable of holding 12-16 pairs of shoes. Its stackable and adjustable design offers versatility for various spaces like entryways, closets, or garages.

2. Safety Information

• Anti-Tip Kit: Always secure the shoe rack to the wall using the provided anti-tip kit, especially if stacking multiple units or placing in high-traffic areas. This prevents accidental tipping and potential injury.
• Weight Capacity: Do not overload the shelves. Each shelf is designed to hold a maximum of 30 lb (13.6 kg). Exceeding this limit may compromise stability and cause damage.
• Assembly: Follow all assembly instructions precisely. Ensure all connections are tight before use.
• Placement: Place the shoe rack on a flat, stable surface to prevent wobbling.
• Children: Keep children away from the unit during assembly. Do not allow children to climb on or play with the shoe rack.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Side Frames (Left and Right)
• Wire Shelves (4 pieces)
• Connecting Rods/Bars
• Screws and Allen Wrench
• Adjustable Feet (4 pieces)
• Anti-Tip Kit (Wall anchors, screws, strap)
• Instruction Manual

4. Setup and Assembly

Assembly is straightforward and typically takes minutes. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.

1. Unpack and Identify Parts: Lay out all components and compare them with the package contents list. Ensure all parts are labeled correctly.
2. Attach Adjustable Feet: Screw the adjustable feet into the bottom of the side frames. Adjust them later to ensure stability on uneven floors.
3. Assemble Side Frames: Connect the upper and lower sections of the side frames using the provided screws. Do not fully tighten screws until all parts are in place.
4. Install Shelves: Insert the wire shelves into the designated slots on the side frames. The shelves can be installed either angled or flat. Ensure the baffle (raised edge) is positioned as desired to prevent items from falling.
5. Tighten All Screws: Once all shelves are in place and the unit is correctly aligned, fully tighten all screws.
6. Attach Anti-Tip Kit: For safety, attach the anti-tip kit to the top of the shoe rack and secure it to a wall stud using the provided hardware.

Figure 4.1: Illustration of the stackable and customizable design.

Figure 4.2: Shelves can be adjusted to an angled or flat position.

Figure 4.3: Detail of the secure round handle, practical hanging rail, and adjustable feet.

5. Operating Instructions

This shoe rack is designed for versatile storage. Here are key operational aspects:

• Shoe Placement: Place shoes on the wire shelves. The angled position is ideal for displaying shoes, while the flat position provides a stable surface for various items.
• Adjusting Shelves: The inclination of each shelf can be adjusted to be level or tilted. This allows accommodation for different shoe types, from flats to high heels, and even boots by removing a shelf.
• Stacking Units: Multiple units can be stacked vertically to create a taller storage solution, maximizing vertical space. Ensure proper connection and use the anti-tip kit when stacking.
• Horizontal Expansion: Units can also be bridged horizontally to expand storage width, allowing for personalized configurations.
• Multi-functional Use: While primarily a shoe rack, its robust design allows it to store other items such as books, drinks, or general sundries, making it suitable for various rooms beyond the entryway.

Figure 5.1: The shoe rack integrated into a closet for organized storage.

Figure 5.2: Demonstrates large capacity and the ability to remove shelves for taller items like boots.

Figure 5.3: The rack can also be used for storing beverages.

Figure 5.4: The rack can function as a versatile bookshelf.

6. Maintenance

To ensure the longevity and appearance of your SONGMICS shoe rack, follow these simple maintenance guidelines:

• Cleaning: Wipe the metal frame and wire shelves with a dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Rust Prevention: While made of alloy steel, avoid prolonged exposure to excessive moisture to prevent potential rust.

7. Troubleshooting

8. Specifications

• Model Name: SONGMICS 4-Tier Stackable Metal Shoe Rack
• Model Number: ULMR067A01
• Material: Alloy Steel
• Color: Bronze
• Dimensions (D x W x H): 10.8" x 27" x 25.6" (27.5 cm x 68.5 cm x 65 cm)
• Number of Tiers: 4
• Weight Capacity per Shelf: 30 lb (13.6 kg)
• Item Weight: 7.3 lb
• Special Features: Robust, Adjustable Shelf, Stackable, Anti-tip kit included
• Mounting Type: Floor Mount
• Care Instructions: Wipe with Dry Cloth

Figure 8.1: Product dimensions and weight capacity.

9. Warranty and Support

SONGMICS products are designed for quality and durability. For any questions, concerns, or to report missing/damaged parts, please contact SONGMICS customer service. Please have your model number (ULMR067A01) and purchase information ready when contacting support.

For more information, visit the official SONGMICS Store.