Peg Perego Selfie Stroller Instruction Manual

1. Introduction

The Peg Perego Selfie stroller is designed for convenience and ease of use, offering a self-folding, lightweight, and compact solution for parents. Suitable from birth, this stroller provides freedom with its quick and easy self-closing feature. It can be steered, folded, and opened with one hand, simplifying travel with children. The stroller is also compatible with Primo Viaggio 4-35 infant car seats (sold separately) to create a complete travel system. Its design incorporates ball-bearing shock absorbers, swivel wheels, and front and rear suspension systems for a smooth ride.

Key Features:

• Lightweight and compact self-closing design.
• Suitable for children from birth up to 48 lbs with a 150-degree reclining backrest.
• Travel system compatible with Primo Viaggio 4-35 Nido or Primo Viaggio 4-35 Lounge infant car seats (adapter sold separately).
• Equipped with ball-bearing wheels and suspension for smooth maneuverability.
• Sleek eco-leather handlebar for comfortable one-hand guiding.
• Spacious storage basket.
• Expandable hood with UPF 50+ protection and a peek-a-boo window.
• Bumper bar doubles as a carrying handle when the stroller is folded.

2. Safety Information

Always prioritize your child's safety. Read and understand all instructions before using the stroller. Failure to follow these instructions could result in serious injury or death.

• WARNING: Never leave your child unattended in the stroller.
• Always use the 5-point harness system to secure your child. Ensure straps are adjusted snugly.
• Engage the brakes whenever the stroller is stationary.
• Do not overload the storage basket or hang bags on the handlebar, as this can cause the stroller to tip.
• Ensure the stroller is fully open and locked before placing a child in it.
• The maximum weight capacity for this stroller is 48 pounds. Do not exceed this limit.
• Keep children clear of moving parts when folding or unfolding the stroller.
• Do not use accessories or replacement parts other than those approved by Peg Perego.

3. Setup and Assembly

The Peg Perego Selfie stroller comes largely pre-assembled. Follow these steps for initial setup:

1. Unfolding the Stroller: Hold the handlebar firmly. Release the automatic lock (if engaged) and allow the stroller to unfold until it clicks into place. Ensure all locking mechanisms are securely engaged before use.
2. Attaching Wheels: The wheels are typically pre-attached. If not, refer to the specific wheel attachment instructions provided in the separate quick-start guide.
3. Adjusting the Canopy: Extend the canopy to the desired position. The canopy features UPF 50+ protection and can be adjusted for optimal shade.
4. Checking the Harness: Ensure the 5-point harness is correctly threaded and adjusted for your child's size.

Figure 3.1: Front view of the Peg Perego Selfie Stroller, showing the seat, canopy, and handlebar.

Figure 3.2: Rear view of the Peg Perego Selfie Stroller, highlighting the spacious storage basket and rear wheels.

4. Operating Instructions

4.1. Folding the Stroller

The Selfie stroller features a convenient one-hand self-folding system:

1. Ensure the child is removed from the stroller and any items are cleared from the seat and basket.
2. Locate the folding mechanism on the handlebar.
3. With one hand, activate the mechanism (usually a button or lever) and gently push the handlebar forward or down. The stroller will automatically begin to fold into a compact, standing position.
4. Confirm the stroller is fully folded and the automatic lock is engaged. The bumper bar can then be used as a carry handle.

Figure 4.1: The Peg Perego Selfie Stroller shown in its compact, folded position, ready for transport or storage.

4.2. Unfolding the Stroller

To unfold the stroller:

1. Release the automatic lock on the side of the stroller frame.
2. Hold the handlebar and lift upwards, allowing the stroller to extend until it fully locks into the open position.
3. Verify that all locking mechanisms are securely engaged before placing your child in the stroller.

4.3. Adjusting the Seat and Canopy

The stroller seat offers multiple recline positions, including a 150-degree recline suitable from birth. Adjust the seat by locating the recline mechanism on the back of the seat and selecting the desired angle. The canopy is expandable and features a peek-a-boo window for ventilation and visibility, along with UPF 50+ sun protection. Adjust by pulling or pushing the canopy forward or backward.

Figure 4.2: Side view of the stroller demonstrating the extended canopy and seat position.

4.4. Using the Harness System

The 5-point harness system ensures your child's safety. Place your child in the seat, bring the shoulder straps over their shoulders, and the waist straps around their hips. Connect the buckles and insert them into the central buckle until they click. Adjust the straps for a snug fit, ensuring two fingers can fit between the strap and your child's body. To release, press the button on the central buckle.

4.5. Brake System

The stroller is equipped with a single-pedal brake system located near the rear wheels. To engage the brakes, press down firmly on the pedal. To release, lift the pedal upwards. Always ensure the brakes are fully engaged when the stroller is stationary.

4.6. Car Seat Compatibility (Travel System)

The Peg Perego Selfie stroller can be converted into a travel system by attaching a compatible Primo Viaggio 4-35 Nido or Primo Viaggio 4-35 Lounge infant car seat. An adapter (sold separately) is required for this conversion. Follow the instructions provided with the adapter and car seat for proper and secure installation.

Figure 4.3: The Peg Perego Selfie Stroller configured as a travel system with an infant car seat.

5. Maintenance and Care

Regular maintenance ensures the longevity and safe operation of your stroller.

• Cleaning Fabric Parts: The fabric parts are made of polyester. Clean with a damp cloth and mild soap. Do not use harsh detergents or bleach. Allow to air dry completely.
• Cleaning Frame and Plastic Parts: Wipe the aluminum frame and plastic components with a damp cloth. Dry thoroughly.
• Wheel Maintenance: Periodically check the rubber tires for wear and tear. Clean any dirt or debris from the wheels and axles to ensure smooth movement. Lubricate moving parts with a silicone-based lubricant if necessary.
• Storage: Store the stroller in a dry, well-ventilated area away from direct sunlight and extreme temperatures to prevent fading and material degradation.

6. Troubleshooting

If you encounter issues with your Peg Perego Selfie stroller, refer to the following common solutions:

• Stroller not folding/unfolding smoothly: Check for any obstructions in the folding mechanism. Ensure the seat is in the upright position and the canopy is retracted. Apply a small amount of silicone lubricant to moving joints if stiffness persists.
• Wheels not swiveling/moving freely: Clean any dirt, hair, or debris from around the wheel axles. Ensure the wheel locks are not engaged.
• Harness difficult to buckle/unbuckle: Check for any debris in the buckle mechanism. Ensure straps are not twisted.
• Brakes not engaging/disengaging: Verify that no debris is obstructing the brake pedal or wheel mechanisms.

If the problem persists after attempting these solutions, please contact Peg Perego customer support for assistance.

7. Technical Specifications

Brand:

Peg Perego

Model Number:

IP2200NA00AT99RO01

Color:

Street Art

Frame Material:

Aluminum or Aluminum Alloy

Fabric Type:

Polyester

Tire Material:

Rubber

Age Range (Description):

Baby (from birth)

Maximum Weight Recommendation:

48 Pounds

Item Weight:

14 Pounds

Item Dimensions (L x W x H):

35"L x 20"W x 42"H

Folded Size:

11"L x 8"W x 4"H (approximate, based on compact nature)

Harness Type:

5 Point

Number of Wheels:

4

Car Seat Compatible:

Yes (with adapter, sold separately)

Safety Standard:

JPMA Certified

Figure 7.1: Visual representation of the Peg Perego Selfie Stroller's dimensions.

8. Warranty and Support

8.1. Manufacturer's Warranty

The Peg Perego Selfie Stroller comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

8.2. Customer Support

For technical assistance, warranty claims, or to purchase replacement parts, please visit the official Peg Perego website or contact their customer service department. Contact details can typically be found on the manufacturer's website or on the product packaging.