1. Introduction
Thank you for choosing the LEPOWER LED Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Safety Information
- Electrical Safety: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Ensure all wiring connections are secure and comply with local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Installation Location: Install the fixture on a sturdy surface capable of supporting its weight. Avoid installing near flammable materials or in areas with excessive vibration.
- Eye Protection: Do not stare directly into the LED light source when the fixture is illuminated, as this may cause eye damage.
- Temperature: The fixture may become hot during operation. Allow it to cool before handling.
- Waterproof Rating: This product is IP65 waterproof, suitable for outdoor use. However, ensure all connections are properly sealed during installation to maintain this rating.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x LEPOWER LED Security Light
- 1 x Bag of Accessories (mounting screws, wire nuts, etc.)
- 1 x User Manual
Image: Overview of the LEPOWER LED Outdoor Flood Light and its main components.
4. Specifications
| Feature | Specification |
|---|---|
| Wattage | 35W |
| Voltage | 120V (110V-130V) |
| Brightness | 3500 Lumens |
| Color Temperature | 5500 Kelvin |
| Waterproof Rating | IP65 |
| Lifespan | Up to 50,000 hours |
| Material | Full Aluminum |
| Dimensions (L x W x H) | 35.6 x 13.5 x 13.7 cm |
| Installation Type | Flush Mount |
| Special Features | Dusk to Dawn Sensor, 3 Adjustable Heads, Energy Efficient |
5. Setup and Installation
The LEPOWER LED Outdoor Flood Light is designed for easy installation. Follow these general steps. Always ensure power is OFF at the circuit breaker before starting.
- Prepare the Installation Area: Choose a suitable outdoor location, such as a wall or eave, where the light can provide optimal coverage. Ensure the mounting surface is clean and stable.
- Mount the Crossbar: Attach the provided crossbar to your junction box using the screws from the accessory bag. Ensure it is securely fastened.
- Wire Connections: Connect the household wiring to the fixture's wiring. Typically, this involves connecting the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the green/bare copper wire (ground) to the ground wire. Use the provided wire nuts and ensure connections are tight.
- Mount the Fixture: Carefully align the fixture with the crossbar and secure it with the mounting screws. Ensure no wires are pinched.
- Seal the Fixture: For outdoor installations, apply weather-resistant sealant around the mounting plate to prevent water intrusion and maintain the IP65 rating.
- Restore Power: Once installation is complete and all connections are secure, turn the power back ON at the circuit breaker.
Image: Diagram showing the dimensions of the flood light and the mounting bracket for installation.
6. Operating Instructions
Your LEPOWER LED Outdoor Flood Light features a built-in photocell sensor for automatic operation and adjustable light heads.
6.1. Dusk to Dawn Mode
The integrated dusk to dawn sensor automatically detects ambient light levels. The flood light will:
- Automatically turn ON at dusk when natural light diminishes.
- Automatically turn OFF at dawn when natural light returns.
Note: This model does not include a motion sensor and is not solar-powered.
Image: Illustration of the flood light automatically turning on at dusk and off at dawn.
6.2. Switch Controlled Mode (Optional)
If you prefer to override the dusk to dawn function or control the light manually, you can cover the photocell sensor with the provided silicone cap. Once the sensor is covered, the light can be controlled by a standard wall switch (not included).
- To activate: Cover the photocell sensor with the silicone cap.
- Operation: Use your existing wall switch to turn the light ON or OFF.
Image: Diagram showing how to cover the photocell sensor with a silicone cap for manual wall switch control.
6.3. Adjusting Light Heads
The three light heads are independently adjustable. You can pivot each head horizontally and vertically to direct the light precisely where needed, optimizing coverage for your backyard, garage, porch, or other areas.
7. Maintenance
The LEPOWER LED Outdoor Flood Light is designed for durability and minimal maintenance.
- Cleaning: Periodically clean the fixture with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components. Ensure power is off before cleaning.
- Inspection: Regularly inspect the fixture for any signs of damage, loose wiring, or wear. Address any issues promptly to ensure safe and optimal performance.
- Durability: Constructed from full aluminum, this light offers excellent heat dissipation and a long lifespan of up to 50,000 hours.
- Weather Resistance: The IP65 waterproof rating ensures the light can withstand various weather conditions, including rain, sleet, and snow.
Image: Close-up view highlighting the durable die-cast aluminum construction of the flood light.
Image: Visual representation of the flood light operating effectively under heavy rain, showcasing its IP65 waterproof capability.
8. Troubleshooting
If you encounter issues with your flood light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn ON at dusk. | 1. Power is off. 2. Photocell sensor is obstructed or faulty. 3. Wiring issue. | 1. Check circuit breaker and wall switch. 2. Ensure photocell is not covered (unless in switch-controlled mode) and is clean. Test by covering the sensor completely to simulate darkness. 3. Verify all wiring connections are secure. Consult an electrician if necessary. |
| Light stays ON during the day. | 1. Photocell sensor is obstructed or in a dark location. 2. Light from another source is hitting the sensor. | 1. Ensure the photocell sensor is not covered and is exposed to sufficient daylight. Relocate if necessary. 2. Reposition the light or shield the sensor from other light sources (e.g., streetlights, other fixtures). |
| Light flickers or dims. | 1. Loose wiring connection. 2. Voltage fluctuations. 3. Faulty fixture. | 1. Turn off power and check all wiring connections for tightness. 2. Consult an electrician to check household voltage. 3. If issues persist after checking connections and power, contact customer support. |
| Light heads are difficult to adjust. | Tightened too much during manufacturing or installation. | Gently apply force to adjust. Do not force excessively to avoid damage. |
9. Warranty Information
LEPOWER products are manufactured to high-quality standards. For specific warranty details regarding your LEPOWER LED Outdoor Flood Light, please refer to the warranty card included in your product packaging or visit the official LEPOWER website. Keep your purchase receipt as proof of purchase for any warranty claims.
10. Customer Support
If you have any questions, require technical assistance, or need to report a problem with your LEPOWER LED Outdoor Flood Light, please contact our customer support team:
- Website: Visit the official LEPOWER website for FAQs and contact information.
- Email: Refer to your product packaging or the LEPOWER website for the customer service email address.
Please have your model number (YY02B-BR) and purchase date ready when contacting support.
