1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your ReliOn Premier Compact Blood Glucose Monitoring System. Please read this manual thoroughly before using the device for the first time and keep it for future reference. This system is intended for in vitro diagnostic use by people with diabetes at home as an aid to monitor the effectiveness of diabetes control.
2. Package Contents
Verify that all components are present in your ReliOn Premier Compact Blood Glucose Monitoring System kit:
- ReliOn Premier Compact Blood Glucose Meter
- Lancing Device
- Lancets (10 count)
- ReliOn Premier Test Strips (50 count)
- Carrying Case
- User Manual (this document)
Image 2.1: Contents of the ReliOn Premier Compact Blood Glucose Monitoring System kit. This image displays the compact meter, a vial of test strips, a lancing device, and several lancets, all neatly arranged next to a black carrying case.
3. Setup
3.1. Meter Preparation
The ReliOn Premier Compact meter typically comes with a battery pre-installed or includes one for immediate use. If the meter does not power on, ensure the battery is correctly inserted. Refer to the battery compartment for proper orientation.
3.2. Setting Up the Lancing Device
- Unscrew the lancing device cap.
- Insert a new sterile lancet firmly into the lancet holder.
- Twist off the protective cap from the lancet.
- Replace the lancing device cap.
- Adjust the penetration depth by rotating the cap. Start with a shallower setting and increase if needed to obtain a sufficient blood sample.
- Pull back the cocking mechanism until it clicks, indicating it is ready for use.
4. Operating Instructions: Performing a Blood Glucose Test
Follow these steps carefully to ensure accurate blood glucose readings:
- Wash and Dry Hands: Wash your hands thoroughly with warm, soapy water and dry them completely. This helps prevent infection and ensures an accurate sample.
- Prepare the Meter: Insert a new ReliOn Premier test strip into the meter's test strip port. The meter will turn on automatically and display a symbol indicating it is ready for a blood sample.
- Obtain Blood Sample:
- Place the lancing device firmly against the side of your fingertip and press the release button.
- Gently squeeze your finger to form a round drop of blood. Do not "milk" or forcefully squeeze your finger, as this can dilute the sample and affect accuracy.
- Wipe away the first drop of blood with a clean tissue. Use the second drop for testing.
- Apply Blood to Test Strip: Touch the tip of the test strip to the second drop of blood. The blood will be drawn into the strip automatically. Hold the strip to the blood drop until the meter beeps or indicates that enough blood has been collected.
- Read Results: The meter will count down (typically 7 seconds) and then display your blood glucose result.
- Record Results: It is recommended to record your results in a logbook or a diabetes management app.
- Dispose of Used Materials: Carefully remove the used test strip and dispose of it. Remove the lancet from the lancing device and dispose of it in a sharps container.
Image 4.1: Proper technique for inserting a test strip and preparing to apply a blood sample. The image shows a hand holding the ReliOn Premier Compact meter with a test strip inserted, while the other hand prepares a fingertip for lancing.
Image 4.2: Illustration of the minimal blood sample volume required for the ReliOn Premier Compact meter (0.5µL) compared to other meters, emphasizing its efficiency.
5. Maintenance and Care
5.1. Cleaning the Meter
Wipe the meter exterior with a soft, damp cloth. Use a mild detergent if necessary. Do not immerse the meter in water or use harsh cleaning agents.
5.2. Storage
- Store the meter and test strips in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep test strips in their original vial with the cap tightly closed to protect them from moisture.
- Do not use expired test strips. Check the expiration date on the vial.
5.3. Battery Replacement
When the battery low indicator appears on the display, replace the battery immediately. Refer to the meter's battery compartment for the correct battery type and replacement instructions.
6. Troubleshooting
If you encounter issues with your ReliOn Premier Compact Blood Glucose Monitoring System, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Meter does not turn on. | Dead or incorrectly inserted battery. | Replace battery or ensure it is inserted correctly. |
| Error message displayed. | Insufficient blood sample, expired test strip, or damaged strip. | Repeat test with a new strip and sufficient blood. Check strip expiration date. |
| Inconsistent or unexpected readings. | Improper sample collection (e.g., "milking" finger, wet hands), expired strips, or meter malfunction. | Review operating instructions for proper technique. Ensure hands are clean and dry. Use fresh, unexpired strips. If issues persist, contact customer support. |
| Blood sample not drawn into strip. | Insufficient blood drop or incorrect application. | Ensure a round, sufficient blood drop is formed. Touch the strip's tip to the blood drop, not the skin. |
7. Specifications
- Model Name: Premier Compact
- Brand: Reli On
- Operating Time: Approximately 7 seconds
- Blood Sample Size: 0.5 µL (microliters)
- Dimensions: Approximately 3.44 inches (length) x 1.13 inches (width)
- ASIN: B08PCHQ5NT
- UPC: 681131240727
Image 7.1: Physical dimensions of the ReliOn Premier Compact meter, illustrating its compact size for portability.
8. Warranty and Support
For warranty information, technical support, or to report any issues with your ReliOn Premier Compact Blood Glucose Monitoring System, please contact ReliOn customer service. Refer to the product packaging or the official ReliOn website for current contact details.
It is important to use only ReliOn Premier Test Strips with this device to ensure accurate results and maintain warranty validity.