1. Product Overview
The Habitat Decor MR3802W is a 30-inch round mirror designed to enhance your living space. It features a wooden frame with ridged details and a distressed white finish, offering a rustic aesthetic. This mirror is intended for wall mounting and measures 30 inches in length and 30 inches in width.
- Dimensions: 30 inches (76.2 cm) long x 30 inches (76.2 cm) wide
- Frame Material: Wood
- Finish: Distressed White
- Mounting Type: Wall Mount
Figure 1: Front view of the Habitat Decor 30-inch round mirror, showcasing its distressed white carved frame.
2. Important Safety Information
Please read and understand all safety instructions before handling or installing the mirror. Failure to follow these instructions may result in injury or damage to the product.
- Warning: This mirror contains breakable glass. Always handle with extreme care to prevent injury.
- For wall mounting, ensure the chosen wall surface is structurally sound and level to securely support the mirror's weight (approximately 9.7 pounds or 4.4 kg).
- Avoid placing the mirror near direct heat sources, open flames, or areas prone to significant vibration, as this can increase the risk of breakage.
- In the event of breakage, exercise caution when cleaning up shattered glass to avoid cuts. Use protective gloves and dispose of glass fragments safely.
- Keep out of reach of children and pets during installation and ensure it is securely mounted afterward.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- 1 x Habitat Decor MR3802W 30-inch Round Carved Frame Mirror
- Pre-installed hanging hardware (D-rings or similar, typically on the back)
Note: Mounting screws, wall anchors, and tools are not included and must be supplied by the user based on wall type.
4. Installation Instructions
The Habitat Decor MR3802W mirror is designed for wall mounting and requires no assembly. Follow these steps for secure installation:
- Choose Location: Select a suitable wall location, ensuring it is free from electrical wires, plumbing, or other obstructions. The wall must be capable of supporting the mirror's weight (approximately 9.7 lbs).
- Gather Tools: You will need a measuring tape, pencil, level, drill, appropriate wall anchors (e.g., drywall anchors, toggle bolts, or stud screws depending on your wall type), and screws.
- Measure Hanging Points: On the back of the mirror, locate the pre-installed hanging hardware (typically two D-rings or keyhole hangers). Measure the distance between the centers of these hangers.
- Mark Wall: Transfer this measurement to your chosen wall location. Use a level to ensure the marked points are perfectly horizontal.
- Install Anchors/Screws: Drill pilot holes at the marked points and install appropriate wall anchors if not drilling into a wall stud. Insert screws into the anchors or studs, leaving a small portion of the screw head exposed for the mirror's hangers to rest on.
- Hang Mirror: Carefully lift the mirror and align the pre-installed hanging hardware on the back with the screws on the wall. Gently lower the mirror until it is securely seated on the screws.
- Verify Stability: Lightly tug on the mirror to ensure it is stable and securely mounted to the wall.
Figure 2: Rear view of the mirror, illustrating the pre-installed hanging hardware for wall mounting.
5. Care and Maintenance
Proper care will help maintain the appearance and longevity of your mirror.
- Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the frame edges. Wipe gently until clean and streak-free.
- Cleaning the Frame: The wooden frame with its distressed white finish should be cleaned with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
- Handling: Always lift the mirror by its frame, not by the glass.
- Environment: Avoid exposing the mirror to extreme temperature changes or high humidity, which can affect the wood frame and mirror backing.
Figure 3: Detail of the mirror's distressed white carved wooden frame.
6. Troubleshooting
This section addresses common concerns you might encounter with your mirror.
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror appears dirty or streaky. | Dust, fingerprints, or improper cleaning. | Clean the mirror surface with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid spraying directly onto the mirror. |
| Mirror feels unstable on the wall. | Improper installation, loose screws, or inadequate wall anchors. | Carefully remove the mirror and re-evaluate the wall anchors and screws. Ensure they are appropriate for your wall type and securely fastened. Re-hang the mirror, verifying its stability. |
| Frame appears damaged or discolored. | Exposure to harsh chemicals, excessive moisture, or physical impact. | Avoid using harsh cleaners on the frame. For minor scuffs, a touch-up pen matching the distressed white finish may be used with caution. Significant damage may require professional repair or replacement. |
7. Product Specifications
| Model Number | MR3802W |
| Brand | Habitat |
| Dimensions (L x W) | 30 inches x 30 inches (76.2 cm x 76.2 cm) |
| Item Weight | 9.7 Pounds (approx. 4.4 kg) |
| Frame Material | Wood |
| Finish Type | Painted, Distressed White |
| Shape | Round |
| Style | Rustic |
| Mounting Type | Wall Mount |
| Assembly Required | No |
| Included Components | Mirror with pre-installed hanging hardware |
| Manufacturer | Brewster Home Fashions |
8. Warranty and Support
Based on the provided information, this product does not come with a manufacturer's warranty ("No Warranty").
For any questions regarding the product or assistance with installation, please refer to the retailer's customer service or contact the manufacturer, Brewster Home Fashions, directly.
- Manufacturer: Brewster Home Fashions
- Place of Business: RANDOLPH, MA, 02368 US
