1. Introduction
This instruction manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of your Teka Universe Reversible Built-in Sink, model 115170001. Please read this manual thoroughly before installation and use to ensure safe and efficient operation and to preserve the product's longevity.
2. Product Overview
The Teka Universe sink is a high-quality, reversible built-in kitchen sink designed for modern kitchens. It features two basins and an integrated draining board, offering versatility and functionality.
- Material: Stainless steel with a polished finish.
- Design: Two basins and a reversible draining board, allowing for flexible installation to suit your kitchen layout.
- Installation: Designed for recessed (built-in) installation into an 80 cm cabinet.
- Drainage: Equipped with a manual valve drain featuring a 3½-inch basket and siphon.
- Basin Depth: Each basin has a depth of 170 mm.
- Overall Dimensions: Approximately 50 cm (Height/Depth) x 116 cm (Width) x 17 cm (Basin Depth).
Image 2.1: The Teka Universe sink, featuring two stainless steel basins and a ribbed draining board, integrated into a kitchen countertop. A modern faucet is installed between the basins. This image shows the sink from an angled perspective, highlighting its polished finish and overall design.
3. Safety Information
Please observe the following safety precautions during installation and use:
- Ensure all plumbing connections are secure and watertight to prevent leaks and water damage.
- Handle the sink with care during installation to avoid injury or damage to the product.
- Do not use corrosive or highly abrasive cleaning agents, as these can damage the stainless steel finish.
- Avoid dropping heavy or sharp objects into the sink, which could cause dents or scratches.
- If installing a garbage disposal unit, follow the manufacturer's instructions carefully and ensure proper sealing.
4. Setup and Installation
The Teka Universe sink is designed for recessed installation into an 80 cm wide kitchen cabinet. Professional installation is recommended to ensure proper fit and function.
4.1 Pre-Installation Checks
- Verify that your cabinet opening is suitable for a sink with dimensions of approximately 116 cm (width) x 50 cm (depth).
- Ensure all components, including the sink, drain basket, and siphon, are present and undamaged.
- Note that the sink does not come with a pre-drilled faucet hole. You will need appropriate tools for drilling the faucet hole if required.
4.2 Installation Steps
- Prepare the Countertop: Cut the countertop opening according to the provided template (if included) or the sink's exact dimensions. Ensure edges are smooth and sealed against moisture.
- Determine Reversibility: Decide whether the draining board should be on the left or right side. The sink is designed to be reversible.
- Drill Faucet Hole (if needed): If installing a faucet directly on the sink, carefully mark and drill the faucet hole using appropriate tools for stainless steel.
- Apply Sealant: Apply a bead of silicone sealant around the perimeter of the sink opening on the countertop.
- Position the Sink: Carefully lower the sink into the countertop opening. Ensure it is properly aligned and seated.
- Secure the Sink: Use the provided mounting clips (if applicable) to secure the sink to the underside of the countertop. Tighten evenly to create a tight seal.
- Install Drain Components: Assemble the 3½-inch basket drain and siphon according to the instructions provided with those components. Connect to your household plumbing.
- Connect Faucet (if applicable): Install and connect your kitchen faucet to the water supply lines.
- Test for Leaks: Turn on the water supply and fill the basins. Check all connections for leaks.
Image 4.1: An overhead view of the Teka Universe sink, illustrating its two basins and the integrated draining board. This perspective clearly shows the layout and the polished stainless steel surface, useful for planning installation orientation.
Image 4.2: An angled view of the Teka Universe sink, demonstrating its reversible design with the draining board positioned on the right. This highlights the flexibility in installation to match various kitchen layouts.
5. Operating Instructions
Using your Teka Universe sink is straightforward. The two basins allow for multi-tasking, such as washing dishes in one and rinsing in the other, or preparing food. The draining board provides a convenient area for drying dishes or preparing ingredients.
- Water Flow: Control water flow and temperature using your installed kitchen faucet.
- Drainage: The manual basket drain allows you to open or close the drain to fill the basin or allow water to flow out. The basket also catches food debris, preventing clogs.
- Draining Board: Utilize the ribbed draining board for air-drying dishes, glasses, or produce. The grooves are designed to direct excess water back into the sink.
6. Maintenance and Care
Regular cleaning and proper care will maintain the polished finish and extend the life of your stainless steel sink.
- Daily Cleaning: After each use, rinse the sink thoroughly with water and wipe it dry with a soft, clean cloth to prevent water spots and mineral buildup.
- General Cleaning: For routine cleaning, use a mild dish soap and warm water. Apply with a soft sponge or cloth, then rinse and dry.
- Avoid Abrasives: Do not use abrasive cleaners, steel wool, wire brushes, or scouring pads, as these can scratch the stainless steel surface.
- Chemicals: Avoid contact with strong acids, bleach, or harsh chemical cleaners, which can stain or corrode stainless steel. If accidental contact occurs, rinse immediately and thoroughly.
- Drain Basket: Regularly empty and clean the drain basket to prevent food accumulation and odors.
- Preventing Scratches: While stainless steel is durable, it can scratch. Use cutting boards for food preparation and avoid dragging heavy or sharp objects across the sink surface.
7. Troubleshooting
This section addresses common issues you might encounter with your sink.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leaks | Loose plumbing connections, improper sealant application, damaged siphon. | Check and tighten all plumbing connections. Reapply silicone sealant if necessary. Inspect siphon for cracks or damage and replace if found. |
| Slow Drainage | Clogged drain basket, blockage in the siphon or drain pipes. | Remove and clean the drain basket. Disassemble and clean the siphon. If blockage persists, a plumber may be required. |
| Water Spots/Stains | Hard water deposits, not drying the sink after use. | Wipe the sink dry after each use. For existing spots, use a stainless steel cleaner or a solution of vinegar and water, then rinse and dry thoroughly. |
| Scratches on Surface | Abrasive cleaning materials, sharp objects, heavy use. | Use only soft cloths and non-abrasive cleaners. Avoid dragging sharp objects. Minor scratches can sometimes be minimized with specialized stainless steel scratch removal kits, following product instructions carefully. |
8. Specifications
Detailed technical specifications for the Teka Universe Reversible Built-in Sink, model 115170001:
- Brand: Teka
- Model Number: 115170001
- Material: Stainless Steel
- Finish Type: Polished
- Color: Steel
- Installation Type: Recessed (Built-in) / Countertop
- Overall Dimensions (L x W x D): 116 cm x 50 cm x 17 cm (approx. 45.7" x 19.7" x 6.7")
- Basin Depth: 170 mm (approx. 6.7 inches)
- Cabinet Size Requirement: 80 cm base unit
- Number of Basins: 2
- Drain Type: Manual valve drain with 3½" basket and siphon
- Shape: Rectangular
- Item Weight: 4.62 kg (approx. 10.16 lbs)
- Style: Modern
9. Warranty and Support
For warranty information, technical support, or to purchase replacement parts, please contact Teka customer service directly or refer to the official Teka website. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer: Teka
Website: www.teka.com (Please verify the official website for your region)
