Alonefire X32 4-in-1 Multicolor Tactical LED Flashlight User Manual

1. Introduction

Thank you for choosing the Alonefire X32 4-in-1 Multicolor Tactical LED Flashlight. This versatile flashlight is designed for various applications, including camping, hiking, hunting, fishing, and general backpacking. It features four individual LED light sources (Red, Green, Blue, White) for diverse lighting needs, a durable aluminum alloy casing, and a zoomable beam for adjustable focus. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your flashlight.

Image 1.1: The Alonefire X32 flashlight showcasing its multicolor light capabilities.

This image displays the Alonefire X32 flashlight, highlighting its ability to emit multiple colors of light simultaneously, specifically red, green, and blue, from its front lens. The flashlight body is black with a textured grip and a pocket clip.

2. Safety Information

• Eye Safety: Do not look directly into the LED light or shine it directly into the eyes of people or animals. The intense light can cause temporary vision impairment or permanent eye damage.
• Battery Safety:
  • Use only the specified rechargeable battery and charger provided or recommended by the manufacturer.
  • Do not mix old and new batteries, or different types of batteries.
  • Do not dispose of batteries in fire; they may explode.
  • Do not short-circuit the battery terminals.
  • If the battery leaks, avoid contact with skin and eyes. Rinse affected areas thoroughly with water and seek medical attention if irritation persists.
• Heat: The flashlight may become warm during prolonged use. This is normal. Avoid touching the head of the flashlight when it is hot.
• Water Resistance: The flashlight has an IP6 waterproof level, meaning it is protected against powerful water jets. However, it is not designed for submersion. Do not immerse the flashlight in water.
• Children: Keep the flashlight and its components out of reach of children to prevent accidental injury or ingestion of small parts.

3. Package Contents

Please check the package contents upon unboxing to ensure all items are present:

• Alonefire X32 4-in-1 Multicolor Tactical LED Flashlight
• High Capacity Rechargeable Lithium Ion Battery (1 included)
• Battery Charger with USB Cable
• 18650 Battery Sleeve (for 18650 battery, if applicable)
• AAA Battery Holder (for 3x AAA batteries, if applicable)

Image 3.1: Contents of the Alonefire X32 flashlight package.

This image displays the Alonefire X32 flashlight along with its included accessories: a rechargeable battery, a battery charger, a USB charging cable, and a white plastic sleeve for the battery.

4. Setup

4.1 Battery Installation

1. Unscrew the tail cap of the flashlight by turning it counter-clockwise.
2. Insert the provided rechargeable Lithium Ion battery into the flashlight with the positive (+) end facing towards the head of the flashlight. If using the 18650 battery sleeve or AAA battery holder, ensure the battery is correctly inserted into the sleeve/holder first.
3. Screw the tail cap back on clockwise until it is securely tightened.

Image 4.1: Exploded view showing flashlight components and battery insertion point.

This image provides an exploded diagram of the Alonefire X32 flashlight, illustrating its various parts including the RGBW 4PCS Individual LED, lamp convex lens, non-slip handle, pen holder, 18650 battery sleeve, AAA battery holder, brass contactor, and power switch. It clearly shows where the battery is inserted into the main body.

4.2 Charging the Battery

Before first use, fully charge the battery. The charger has overheat and overcharge protection.

1. Remove the rechargeable battery from the flashlight.
2. Place the battery into the provided battery charger, ensuring the correct polarity (+ and -).
3. Connect the USB cable to the charger and plug the other end into a USB power source (e.g., computer USB port, wall adapter, power bank).
4. The charger's indicator light will show the charging status (e.g., red for charging, green for fully charged).
5. Once fully charged, disconnect the charger and remove the battery.

5. Operating Instructions

5.1 Power On/Off

To turn the flashlight ON or OFF, firmly press the power switch located on the tail cap.

5.2 Switching Light Modes (Colors)

The Alonefire X32 features four individual LED light sources: White, Red, Green, and Blue. To cycle through the different light modes:

• With the flashlight ON, lightly press the power switch (do not fully click) to cycle through the available colors.
• The sequence typically cycles through White, Red, Green, Blue.
• A full click of the power switch will turn the flashlight OFF. When turned back ON, it will typically resume the last used mode.

Image 5.1: Illustration of the four distinct light modes (White, Red, Green, Blue).

This image displays the Alonefire X32 flashlight with a prominent title "4 LIGHT MODES" and lists "White, Red, Green, Blue Light 4 in 1". Below the flashlight, four circular insets show examples of how each color might be used: white for general illumination, red for night vision or hunting, green for hunting, and blue for fishing or tracking.

Image 5.2: Visual representation of the flashlight's white, blue, green, and red light beams.

This image features four separate close-up shots of the flashlight's head, each demonstrating one of its distinct light colors: white, blue, green, and red. The beams are cast onto a surface, clearly showing the color output.

5.3 Adjusting Focus (Zoom Function)

The flashlight features an adjustable focus mechanism to narrow or widen the beam.

• To zoom in (narrow the beam for a spotlight effect), gently push the head of the flashlight forward.
• To zoom out (widen the beam for a floodlight effect), gently pull the head of the flashlight backward.

Image 5.3: Visual guide for adjusting the flashlight's focus.

This image illustrates the zoom functionality of the flashlight. The top panel shows the flashlight zoomed in, producing a concentrated, square beam labeled "ZOOM IN". The bottom panel shows the flashlight zoomed out, producing a wider, diffused beam labeled "ZOOM OUT". Arrows indicate the direction to move the flashlight head for each function.

6. Maintenance

• Cleaning: Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Keep the lens clean for optimal light output.
• Battery Care:
  • Recharge the battery regularly, even if not frequently used, to maintain its lifespan.
  • If storing the flashlight for an extended period, remove the battery to prevent leakage.
  • Store batteries in a cool, dry place.
• Lubrication: Periodically apply a thin layer of silicone grease to the O-rings and threads to maintain water resistance and smooth operation.
• Storage: Store the flashlight in a dry environment, away from extreme temperatures and direct sunlight.

7. Troubleshooting

8. Specifications

Image 8.1: Dimensional drawing of the Alonefire X32 flashlight.

This image provides a technical drawing showing the dimensions of the Alonefire X32 flashlight. It illustrates the length (153mm zoomed out, 136mm zoomed in) and the diameter (37mm at the head, 29mm at the body), along with indicators for zoom in and zoom out.

9. Warranty and Support

For warranty information, technical support, or customer service inquiries regarding your Alonefire X32 flashlight, please refer to the contact information provided with your purchase or visit the official ALONEFIRE store on Amazon:

Visit the ALONEFIRE Store on Amazon

Please retain your proof of purchase for any warranty claims.