Important Safety Information
- Do not exceed the maximum weight capacity of 800 lbs.
- Exercise caution when handling metal components to avoid sharp edges.
- Ensure all bolts and connections are securely tightened before use. Periodically check and re-tighten as needed.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Assemble the bed frame on a soft, clean surface (e.g., carpet) to prevent scratches and damage to the product or floor.
Package Contents
Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
| Part | Description | Quantity |
|---|---|---|
| Side Rails | Long metal rails for the bed frame sides. | 2 |
| End Rails | Shorter metal rails for the head and foot of the bed. | 2 |
| Support Legs | Vertical support legs for the frame. | 6 |
| Metal Slats | Horizontal metal bars for mattress support. | Multiple (refer to specific count in hardware pack) |
| Hardware Pack | Bolts, nuts, washers, Allen wrench, and small wrench. | 1 |
Assembly Instructions
Assembly is designed to be straightforward and typically takes about 20 minutes with the provided tools. Follow these steps carefully:
- Step 1: Unpack and Identify Parts
Carefully remove all components from the packaging. Lay them out on a clean, soft surface and compare them against the 'Package Contents' list to ensure everything is present and undamaged.
Image: Components laid out for assembly, highlighting the integrated structure and easy lock slats.
- Step 2: Assemble the Main Frame
Connect the side rails and end rails using the provided bolts and nuts. Ensure the connection points are aligned correctly. Do not fully tighten bolts until the entire frame is assembled to allow for minor adjustments.
Image: The main metal frame assembled, ready for slats and mattress.
- Step 3: Attach Support Legs
Attach the support legs to the designated points on the frame. These legs provide additional stability and weight distribution. Ensure they are securely fastened.
Image: Illustration of the recessed leg design, which helps minimize the risk of stubbing toes.
- Step 4: Install Metal Slats
Place the metal slats across the frame. The slats are designed to snap or lock into place without additional screws. Ensure each slat is firmly seated in its designated slot for optimal mattress support and noise reduction.
- Step 5: Final Tightening
Once all components are in place and aligned, go back and fully tighten all bolts using the provided Allen wrench and small wrench. This ensures the frame is stable and noise-free.
Product Specifications
| Feature | Detail |
|---|---|
| Dimensions (L x W x H) | 80"L x 38"W x 18"H |
| Weight | 29 lbs |
| Weight Capacity | Up to 800 lbs |
| Material | Durable Metal Steel (Alloy Steel) |
| Color | Black |
| Special Features | Easy Assembly, Squeak Resistant, Steel Slats, Under-bed Storage |
| Box Spring Required | No |
Image: Detailed dimensions and weight capacity of the COMASACH Twin XL bed frame.
Care and Maintenance
- Cleaning: Wipe down the metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
- Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability and prevent noise.
- Weight Distribution: Distribute weight evenly across the bed frame to prolong its lifespan and prevent stress on individual components.
- Moving the Frame: When moving the bed frame, lift it rather than dragging it to prevent damage to the legs or floor.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Squeaking Noise | Loose bolts or uneven surface. | Ensure all bolts are tightened. Check if the bed is on a level surface. |
| Frame Wobbles | Incomplete tightening of connections. | Re-check and tighten all bolts, especially at the corners and leg attachments. |
| Mattress Slides | Smooth mattress bottom or lack of friction. | Consider placing a non-slip mat between the mattress and the slats. |
Warranty Information
For specific warranty details and terms, please refer to the documentation included with your purchase or contact COMASACH customer support directly. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact COMASACH customer support through the retailer where you purchased the product or visit the official COMASACH website for contact information.