Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your MARVO HG8936 Gaming Headset. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. The MARVO HG8936 is a wired gaming headset designed for an immersive audio experience with a built-in microphone for clear communication.
Package Contents
Verify that all items listed below are present in your package:
- MARVO HG8936 Gaming Headset
- User Manual (this document)
Product Overview
Familiarize yourself with the components of your MARVO HG8936 Gaming Headset.
Figure 1: Front-angled view of the MARVO HG8936 Gaming Headset, showcasing its over-ear design, adjustable headband, and integrated RGB lighting on the earcups. The microphone is visible in a slightly extended position.
Figure 2: Side view of the headset with the flexible microphone boom fully extended, ready for communication. This view highlights the earcup padding and the cable connection point.
Figure 3: Side view of the headset with the microphone boom folded upwards and retracted, ideal for when voice communication is not required or for storage.
Key Components:
- Adjustable Headband: For a comfortable fit.
- Over-Ear Earcups: Padded for comfort during extended use.
- Flexible Microphone: Built-in for voice communication, can be adjusted or retracted.
- In-line Remote Control: For volume adjustment and microphone mute.
- Wired Connectivity: 3.5mm audio jack for sound, USB connector for LED lighting.
Setup Instructions
- Connect Audio Jack: Plug the 3.5mm audio jack into the corresponding audio port on your PC, Nintendo Switch, PlayStation 4, or other compatible device. This port is typically marked with a headphone icon.
- Connect USB for Lighting: Plug the USB connector into an available USB port on your device. This connection powers the headset's LED lighting features.
- Adjust Headset Fit: Extend or retract the adjustable headband to ensure the earcups sit comfortably over your ears.
- Configure Audio Settings (PC/Console):
- For PC: Navigate to your operating system's Sound Settings. Select the headset as the default playback device (speakers) and recording device (microphone).
- For Consoles (e.g., PS4, Nintendo Switch): Access the system settings and locate audio output/input options to ensure the headset is recognized and selected for both sound and microphone.
Operating Instructions
Volume Control:
The MARVO HG8936 features an in-line remote control on the cable. Use the volume wheel or buttons on this remote to adjust the audio output level to your preference.
Microphone Usage:
- Activate Microphone: Position the flexible microphone boom close to your mouth for optimal voice pickup.
- Mute Microphone: Use the microphone mute switch located on the in-line remote control to quickly turn the microphone on or off.
- Retract Microphone: When not in use, the microphone can be folded upwards and away from your face for convenience.
LED Lighting:
The headset's LED lighting is automatically activated when the USB connector is plugged into a powered USB port. There are no user-adjustable controls for the lighting effects on the headset itself.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the headset. For earcups, a slightly damp cloth can be used, but ensure no moisture enters the speaker grilles. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the headset.
- Cable Care: Avoid sharp bends or excessive pulling on the cable to prevent damage. The cable is designed to be tangle-free, but proper handling extends its lifespan.
Troubleshooting
- No Sound from Headset:
- Ensure the 3.5mm audio jack is fully inserted into the correct port on your device.
- Check the in-line volume control on the headset cable and increase the volume.
- Verify your device's audio settings to ensure the headset is selected as the default playback device and the volume is not muted.
- Test the headset on another device to rule out a device-specific issue.
- Microphone Not Working:
- Ensure the microphone mute switch on the in-line remote is in the "unmuted" position.
- Verify the 3.5mm audio jack is fully inserted.
- Check your device's audio settings to ensure the headset microphone is selected as the default recording device and its input volume is not muted or set too low.
- Ensure the microphone boom is positioned correctly and not retracted.
- Test the microphone on another device or application.
- LED Lighting Not Working:
- Ensure the USB connector is securely plugged into a powered USB port.
- Try a different USB port on your device.
Specifications
| Brand | MARVO |
| Model | HG8936 |
| Connectivity Technology | Wired (3.5mm Jack, USB for lighting) |
| Headphones Jack | 3.5 mm Jack |
| Compatible Devices | Nintendo Switch, PC, Sony PlayStation 4 |
| Ear Placement | Over Ear |
| Control Type | Volume Control (In-line Remote) |
| Microphone | Built-in, Flexible |
| Cable Feature | Tangle Free |
| Material | Plastic |
| Item Weight | 0.49 Kilograms (1.08 pounds) |
| Special Feature | Lightweight, LED Lighting |
Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official MARVO website. You may also contact MARVO customer service directly for assistance with product inquiries, troubleshooting, or service requests.
Note: Specific warranty terms and conditions may vary by region. Please retain your proof of purchase for warranty claims.
