Mamibot Exvac 880 Wisor Robot Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the Mamibot Exvac 880 Wisor Robot Vacuum Cleaner. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Image 1.1: The Mamibot Exvac 880 Wisor Robot Vacuum Cleaner. This image shows the top-down view of the white circular robot vacuum with a central navigation sensor and the Mamibot logo.

2. Safety Instructions

To reduce the risk of injury or damage, read these safety instructions carefully and keep them handy for future reference.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children should be supervised to ensure they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Do not use the robot in environments with high humidity or near water.
• Ensure the charging dock is placed on a flat, stable surface and away from heat sources.
• Do not allow the robot to pick up large objects, liquids, or burning/smoking materials.
• Regularly clean the brushes and filters to maintain optimal performance and prevent blockages.
• Unplug the charging dock during lightning storms or when not in use for extended periods.

3. Product Overview

Familiarize yourself with the main components of your Mamibot Exvac 880 Wisor.

Image 3.1: Top view of the Mamibot Exvac 880 Wisor. This image shows the robot vacuum from above, highlighting the central navigation sensor and the clean, white surface.

Image 3.2: Side view of the Mamibot Exvac 880 Wisor. This image displays the side profile of the robot, with a clear view of the integrated dustbin/water tank compartment.

Image 3.3: Internal components of the Mamibot Exvac 880 Wisor. This image provides an exploded view, showing the internal structure and key components like the motor, battery, and navigation module.

Key Components:

• LDS Navigation Sensor: Located on top, for precise mapping and navigation.
• Main Brush: For deep cleaning carpets and hard floors.
• Side Brushes: To sweep debris from edges and corners.
• Dustbin/Water Tank: Integrated compartment for dry debris and water for mopping.
• HEPA Filter: Captures fine dust and allergens.
• Charging Contacts: On the underside, for automatic charging.
• Cliff Sensors: Prevents the robot from falling down stairs.

4. Setup

4.1 Unpacking and Initial Placement

1. Carefully remove the robot vacuum and all accessories from the packaging.
2. Remove all protective films and packaging materials from the robot and charging dock.
3. Place the charging dock against a wall on a hard, level surface. Ensure there is at least 0.5 meters of clear space on both sides and 1.5 meters in front of the dock.
4. Connect the power adapter to the charging dock and plug it into a power outlet.

Image 4.1: The Mamibot Exvac 880 Wisor positioned on its charging dock. This image illustrates the robot correctly docked for charging, emphasizing the connection points.

4.2 Initial Charging

Before first use, fully charge the robot. Place the robot on the charging dock, ensuring the charging contacts align. The indicator light on the robot will show charging status. A full charge typically takes 4-5 hours.

4.3 App Connection (Optional)

For advanced features like mapping, scheduling, and remote control, download the Mamibot app from your smartphone's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network.

5. Operating Instructions

5.1 Starting a Cleaning Cycle

• Manual Start: Press the power button on the robot once to start a cleaning cycle. The robot will automatically return to the charging dock when cleaning is complete or battery is low.
• App Start: Open the Mamibot app and select "Start Cleaning" to initiate a cycle.

Image 5.1: Diagram illustrating various cleaning patterns of the robot vacuum. This graphic shows how the robot navigates and covers different areas, including systematic and spot cleaning modes.

5.2 Cleaning Modes

The Mamibot Exvac 880 Wisor offers several cleaning modes:

• Auto Clean: The robot intelligently navigates and cleans the entire floor area.
• Spot Clean: Focuses on a specific dirty area, cleaning in a spiral pattern.
• Edge Clean: Cleans along walls and furniture edges.
• Mopping Mode: Attach the mop cloth and fill the water tank for wet cleaning.

Image 5.2: Diagram depicting the robot vacuum's cleaning path and its ability to resume from a paused state. This visual explains the robot's intelligent navigation and its return-to-dock and resume capabilities.

5.3 Suction Power Adjustment

The robot supports multiple suction power levels. Adjust these via the mobile app to suit different floor types and cleaning needs.

Image 5.3: The Mamibot Exvac 880 Wisor with an overlay indicating "3 levels". This image suggests the robot has adjustable suction power settings, allowing users to choose between different cleaning intensities.

6. Maintenance

Regular maintenance ensures your Mamibot Exvac 880 Wisor operates efficiently.

6.1 Emptying the Dustbin and Cleaning the Filter

1. Press the dustbin release button and pull out the dustbin/water tank.
2. Open the dustbin lid and empty the collected debris into a trash can.
3. Remove the HEPA filter and primary filter. Tap them gently to remove dust. Do not wash the HEPA filter with water.
4. Rinse the dustbin and primary filter with water if necessary, ensuring they are completely dry before reinstallation.

6.2 Cleaning Brushes

• Main Brush: Remove the main brush cover and lift out the brush. Use the cleaning tool to remove hair and debris tangled around the brush.
• Side Brushes: Check side brushes for tangled hair or debris. If damaged, replace them.

6.3 Cleaning Sensors and Charging Contacts

Wipe the cliff sensors, wall sensors, and charging contacts on both the robot and the charging dock with a clean, dry cloth. This prevents navigation errors and ensures proper charging.

7. Troubleshooting

If your Mamibot Exvac 880 Wisor encounters an issue, refer to the following common problems and solutions:

If the problem persists, please contact Mamibot customer support.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the official Mamibot website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.

Mamibot Official Website: www.mamibot.com