TWSOUL Digital Tube LED Clock Instruction Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your TWSOUL Digital Tube LED Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Image 1.1: The TWSOUL Digital Tube LED Clock with its distinctive LED tubes illuminated in blue.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x TWSOUL Digital Tube LED Clock
• 1 x USB Cable (Type-C)
• 1 x User Manual

3. Specifications

Image 3.1: Technical diagram illustrating the clock's dimensions and key features.

4. Setup

4.1 Unpacking

Carefully remove all components from the packaging. Inspect the clock for any visible damage. The clock is designed with 304 stainless steel decorative rings and mesh for durability and aesthetics.

Image 4.1: Detail of the clock's construction, highlighting the stainless steel components.

4.2 Power Connection

Connect the provided USB Type-C cable to the clock's USB port. Connect the other end of the cable to a 5V/1-2A USB power adapter (not included) or a power bank. The clock will power on automatically.

Note: The clock comes with a built-in button battery to retain time settings during power outages, ensuring you do not have to reset the time after power loss.

5. Operation

The clock features four control buttons, typically located on the underside or side of the base. These buttons are generally labeled or function as follows:

• EFF (Effect/Mode) Button: Cycles through display modes and settings.
• SET Button: Enters and confirms settings.
• + Button: Increases values or cycles forward through options.
• - Button: Decreases values or cycles backward through options.

5.1 Basic Time Display

Upon power-on, the clock will display the current time. The clock supports a 12-hour time display format.

5.2 Setting Time and Date

1. Press the SET button to enter time setting mode. The first digit will begin to flash.
2. Use the + or - buttons to adjust the value.
3. Press SET again to move to the next digit or setting (e.g., hour, minute, year, month, day).
4. Continue adjusting values and pressing SET until all desired settings are configured.
5. After setting the date, press SET one last time to exit the setting mode.

5.3 Display Modes (Time, Date, Calendar, Timer)

Press the EFF button repeatedly to cycle through different display modes, which may include:

• Time display (12-hour format)
• Date display (Month/Year, Day is set but not displayed)
• Calendar display
• Timer display

5.4 Alarm Clock Function

1. Press the EFF button until you reach the alarm setting mode.
2. Press SET to enter alarm time adjustment.
3. Use + or - to set the desired alarm hour and minute.
4. Press SET to confirm and move to the alarm enable/disable option.
5. Use + or - to turn the alarm ON or OFF.
6. Press SET to save and exit.

5.5 Timer Function

1. Press the EFF button until you reach the timer setting mode.
2. Press SET to enter timer duration adjustment.
3. Use + or - to set the desired timer duration (e.g., hours, minutes, seconds).
4. Press SET to start the timer.
5. To pause or stop the timer, press SET again.

5.6 Adjusting Color and Brightness

The clock features adjustable LED colors and brightness, offering 9 color modes and 16 million color options.

Image 5.1: The clock's tubes illuminated in a variety of colors, demonstrating customization options.

1. Press the EFF button until you reach the color or brightness setting mode.
2. For color adjustment: Press SET. Use + or - to cycle through preset color modes or individual tube color settings. To cycle through color schemes (0-9), press and hold + or - for approximately 2 seconds. Release the button when the desired scheme is displayed. Press SET to confirm.
3. For brightness adjustment: The clock has an indoor light sensor (located between tubes 3 and 4 on the base) for automatic brightness adjustment. Manual adjustment may also be available by pressing SET and using + or - in the brightness setting mode.
4. Press EFF to exit the setting mode.

Minute Effects: The clock includes a "minute effects" feature where the display digits appear to "vibrate" at the change of each minute. This effect cannot be disabled.

Light Sensor Behavior: The light sensor automatically adjusts brightness. In low light conditions, the display may switch to a dimmed red tone, and the minute effect will be temporarily disabled to prevent excessive brightness in dark environments. When ambient light increases, the clock will revert to its set color scheme and minute effects.

6. Maintenance

6.1 Cleaning

Use a soft, dry cloth to clean the clock's surface. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the materials and electronic components.

6.2 Handling

Handle the clock with care. The acrylic cover and glass tubes are fragile. Avoid dropping or subjecting the clock to strong impacts.

6.3 Power Supply

Always use a 5V/1-2A USB power adapter. Using an incorrect power supply may damage the device and void your warranty.

7. Troubleshooting

7.1 Clock does not power on.

• Ensure the USB Type-C cable is securely connected to both the clock and the power adapter.
• Verify that the power adapter is functioning correctly and providing 5V/1-2A output.
• Try a different USB port or power adapter.

7.2 Time is incorrect after power loss.

• The clock has a built-in button battery for memory. If the time is still incorrect, the battery may need replacement (consult support) or the clock was without power for an extended period.
• Reset the time manually as per the "Setting Time and Date" section.

7.3 Alarm does not sound.

• Ensure the alarm function is enabled in the settings.
• Verify the alarm time is set correctly.

7.4 Display is too dim or too bright.

• Check the ambient light sensor (between tubes 3 and 4) for obstructions.
• Adjust brightness manually if the automatic adjustment is not suitable.

7.5 Date display shows only month and year.

• This is a characteristic of the clock's display mode. While the day is set internally, it is not visually displayed in the standard date mode.

8. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.