Kinco Premium Ski Gloves Model 9088 Instruction Manual

1. Product Overview

The Kinco Premium Ski Gloves Model 9088 are designed for cold environments and rigorous conditions. They feature full-grain buffalo leather for protection against abrasions, punctures, and cuts, ensuring durability. Foam-padded knuckles provide additional protection. The interior includes an aquaNOT waterproof insert to keep hands dry, and Heatkeep thermal insulation for warmth.

Key features include:

• Extra HeatKeep thermal lining for exceptionally cold days.
• Nikwax waterproofing wax for leather is included to help keep hands dry.
• Durable pigskin leather, designed to outlast regular cowhide and fabric ski gloves.
• Reinforcing leather patches sewn with Draylon thread cover the palm area for extra abrasion protection.

2. Setup and Initial Preparation

Before first use, it is recommended to apply the included Nikwax waterproofing wax to the leather. This enhances water resistance and extends the life of the gloves. Follow these steps:

1. Warm the gloves in an oven at a low temperature (e.g., 150°F or 65°C) for a few minutes. This helps the leather absorb the wax more effectively.
2. Apply a thin, even layer of Nikwax waterproofing wax to the entire leather surface of the gloves.
3. Allow the gloves to dry naturally, away from direct heat sources.

3. Operating Instructions

The gloves are designed for ease of use and comfort in cold conditions. The Easy-On cuff design with a shirred elastic wrist allows for quick donning and removal, while also securing the glove to the hand and preventing debris entry. An integrated leather pull-tab on the knit wrist reduces stress on cuff seams during removal.

The seamless angled wing thumb and fourchette finger design promote natural finger movement, enhancing strength, comfort, flexibility, and dexterity during various activities.

Leash cords are included to secure gloves to wrists, ensuring they remain accessible if temporarily removed. Pairing buckles keep the gloves together when stored.

4. Maintenance and Care

To maintain the quality and longevity of your Kinco Premium Ski Gloves, follow these care instructions:

• Hand Wash Only: Clean gloves by hand using mild soap and lukewarm water. Avoid harsh detergents or machine washing, as this can damage the leather and insulation.
• Drying: After washing, gently squeeze out excess water. Do not wring. Allow the gloves to air dry naturally, away from direct heat sources like radiators, fireplaces, or direct sunlight. High heat can cause the leather to crack or shrink.
• Waterproofing Reapplication: Reapply Nikwax waterproofing wax periodically, especially after washing or if water repellency diminishes. Refer to the 'Setup and Initial Preparation' section for reapplication steps.
• Storage: Store gloves in a cool, dry place when not in use. Use the pairing buckles to keep them together.

5. Troubleshooting

If you encounter issues with your gloves, consider the following:

• Reduced Warmth: Ensure gloves are clean and dry. Reapply waterproofing wax if necessary, as moisture can reduce insulation effectiveness.
• Stiffness: New leather gloves may feel stiff. Regular use and proper conditioning with leather wax will soften the material over time.
• Water Penetration: If gloves are no longer repelling water, reapply Nikwax waterproofing wax as described in the 'Setup and Initial Preparation' section. Ensure the application is thorough and the gloves are completely dry before use.

6. Specifications

Size Guide

7. Warranty and Support

For information regarding product warranty, returns, or customer support, please refer to the retailer's policies where the product was purchased. Keep your proof of purchase for any warranty claims.