1. Introduction
Thank you for choosing the Mellerware Cuddly 500W Electric Towel Warmer. This appliance is designed to provide warm towels and gentle heating for your bathroom space. Please read this manual carefully before installation and use to ensure safe and efficient operation. Keep this manual for future reference.
Image 1.1: The Mellerware Cuddly Electric Towel Warmer in a bathroom setting, highlighting its 500W power, suitability for rooms up to 8m², and three programmable modes.
2. Safety Instructions
WARNING: Failure to follow these safety instructions may result in electric shock, fire, or injury.
- Read all instructions before using the appliance.
- This appliance is designed for domestic use only.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Ensure the power supply voltage matches the rating label on the appliance.
- Do not operate the appliance with a damaged cord or plug. Contact qualified service personnel for repair.
- Keep the appliance away from children and pets.
- The appliance is rated IP24, providing protection against splashing water. It is suitable for bathroom installation, but avoid direct water spray.
- Do not cover the towel warmer when in operation, as this can lead to overheating. The unit features overheat protection, which will automatically shut it down if an excessively high temperature is detected.
- Ensure proper ventilation around the unit.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Do not use the appliance for purposes other than its intended use.
Image 2.1: Detail of the towel warmer, emphasizing its IP24 splash protection for safe bathroom use and straightforward installation.
3. Product Features
- 500W Power Output: Efficiently heats towels and provides supplementary heating for rooms up to 8 m².
- Adjustable Temperature: Set desired temperature up to 35°C.
- Three Operating Modes: Comfort, ECO, and Anti-freeze for versatile use.
- 9-Hour Timer: Conveniently schedule heating duration.
- Open Window Function: Automatically deactivates the unit if a rapid temperature drop (2°C in 2 minutes) is detected, saving energy.
- 24/7 Programmable Heating: Customize heating schedules with three default programs.
- Overheat Protection: Automatic shutdown for enhanced safety.
- IP24 Splash Protection: Suitable for safe use in bathrooms.
- Wall-Mount Installation: Includes a kit for quick and easy setup.
Image 3.1: The towel warmer in use, demonstrating its ability to warm various textile items such as towels, sheets, bathrobes, and clothing.
4. Setup and Installation
The Mellerware Cuddly Electric Towel Warmer is designed for wall-mounted installation. A wall-mounting kit is included for your convenience.
4.1. Unpacking
- Carefully remove the towel warmer and all accessories from the packaging.
- Check for any damage during transit. If damage is found, do not install or operate the unit and contact your retailer.
- Retain packaging materials for future storage or transport if needed.
4.2. Wall Mounting
- Choose a suitable location on a solid wall in your bathroom, ensuring it is away from direct water spray and within reach of a power outlet.
- Use the provided wall-mounting kit and follow the instructions to securely attach the brackets to the wall.
- Mount the towel warmer onto the installed brackets. Ensure it is level and firmly secured.
- The electrical connection should be made by a qualified professional, adhering to all local electrical codes and regulations.
Image 4.1: The Mellerware Cuddly unit installed on a bathroom wall, functioning as both a radiator and a towel rail.
5. Operating Instructions
The control panel allows you to manage all functions of your towel warmer.
Image 5.1: The control panel of the Mellerware Cuddly, indicating its 24/7 programmability.
5.1. Power On/Off
- Press the Power button (⏻) to turn the unit on or off.
- When powered on, the display will show the current temperature or selected mode.
5.2. Setting Temperature
- In Comfort mode, use the Plus (+) and Minus (-) buttons to adjust the desired temperature. The temperature can be set up to 35°C.
- The display will show the set temperature, then revert to the current room temperature after a few seconds.
6. Modes and Functions
6.1. Operating Modes
Press the Mode (M) button to cycle through the following operating modes:
- Comfort Mode: Maintains a constant, user-defined temperature. Ideal for continuous heating.
- ECO Mode: Operates at a lower, energy-saving temperature, typically 3.5°C below the Comfort mode setting.
- Anti-freeze Mode: Maintains a minimum temperature (e.g., 7°C) to prevent pipes from freezing in unheated rooms.
6.2. Timer Function
- Press the Timer button (⏱) to activate the timer.
- Use the Plus (+) and Minus (-) buttons to set the desired operating duration, up to 9 hours.
- The unit will automatically turn off after the set time has elapsed.
6.3. Open Window Function
- This function is automatically enabled.
- If the unit detects a rapid drop in room temperature (e.g., 2°C within 2 minutes), it will interpret this as an open window and temporarily suspend heating to conserve energy.
- Heating will resume automatically once the temperature stabilizes or the function is manually overridden.
6.4. Programmable Heating (24/7)
- The towel warmer offers 24-hour, 7-day programmable heating.
- Refer to the detailed programming section in the full manual (if available) for setting custom schedules.
- The unit comes with three default heating programs that can be adjusted to suit your daily and weekly needs.
7. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your towel warmer.
- Cleaning: Always unplug the appliance and allow it to cool completely before cleaning. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Storage: If storing the unit for an extended period, ensure it is clean and dry. Store it in its original packaging in a cool, dry place.
- Inspection: Periodically check the power cord and plug for any signs of damage. If damage is found, discontinue use and contact a qualified technician.
8. Troubleshooting
If you encounter issues with your Mellerware Cuddly Electric Towel Warmer, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply; Power button not pressed; Overheat protection activated. | Check power outlet and plug connection; Press the Power button; Allow unit to cool down and reset. |
| Unit is not heating. | Temperature setting too low; Open Window function activated; Unit in Anti-freeze mode. | Increase temperature setting; Close windows/doors; Switch to Comfort or ECO mode. |
| Display shows an error code. | Internal fault. | Unplug the unit for 5 minutes, then plug it back in. If the error persists, contact customer support. |
9. Specifications
| Specification | Detail |
|---|---|
| Brand | Mellerware |
| Model | Cuddly |
| Power | 500 W |
| Color | White |
| Mounting Type | Wall Mount |
| Finish Type | Painted |
| IP Rating | IP24 (Splash Protection) |
| Max Temperature | 35°C |
| Timer | Up to 9 hours |
10. Warranty and Support
Mellerware products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Mellerware website.
For technical support, spare parts, or service inquiries, please contact Mellerware customer service through the contact details provided in your product documentation or on the official website.
