Riobel TMMSQ39L Momenti Floor Mounted Tub Filler with Hand Shower User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Riobel TMMSQ39L Momenti Floor Mounted Tub Filler with Built-in Diverter and Hand Shower. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and care will ensure optimal performance and longevity of your product.

Safety Information

Always turn off the main water supply before beginning any installation or maintenance.
Ensure all local plumbing and building codes are followed.
If you are unsure about any part of the installation process, consult a qualified professional plumber.
Wear appropriate personal protective equipment (PPE) during installation, such as safety glasses and gloves.
Do not use abrasive cleaners or harsh chemicals on the product finish, as this may cause damage and void the warranty.

Package Contents

Verify that all components are present before beginning installation:

Tub Filler Body (Brushed Gold)
Hand Shower with Hose
Diverter Mechanism (Integrated)
Handle
Shower Arm
Valve Assembly
Mounting Hardware
Installation Guide (this document)

Installation

The Riobel TMMSQ39L is designed for single-hole floor-mounted installation. Ensure your floor structure can support the weight of the tub filler and the water it will contain.

Prepare the Installation Area: Identify the precise location for the tub filler. Ensure adequate space around the bathtub for access and maintenance.
Rough-in Plumbing: Install the necessary hot and cold water supply lines and the floor mounting plate according to the provided rough-in instructions (not detailed here, refer to separate rough-in guide if applicable). Ensure the lines are properly secured and tested for leaks.
Mount the Tub Filler: Secure the tub filler body to the floor mounting plate using the provided hardware. Ensure the unit is level and stable.
Connect Water Lines: Connect the hot and cold water supply lines to the corresponding inlets on the tub filler valve assembly. Use appropriate sealants and tighten connections securely to prevent leaks.
Install Handle and Hand Shower: Attach the handle to the valve stem. Connect the hand shower hose to the designated outlet and secure the hand shower in its holder.
Test for Leaks: Slowly turn on the main water supply and check all connections for leaks. Operate the tub filler and hand shower to ensure proper function and water flow.

Riobel Momenti Floor Mounted Tub Filler with Hand Shower in a modern bathroom setting. — This image displays the Riobel Momenti floor-mounted tub filler, model TMMSQ39L, installed next to a freestanding bathtub. The brushed gold finish of the faucet and hand shower is visible, complementing the contemporary bathroom design.

Operation

Turning On/Off: Rotate the handle to turn the water on or off.
Temperature Control: Adjust the handle left or right to control the water temperature. Left for hotter, right for colder.
Flow Control: The further the handle is rotated away from the off position, the greater the water flow.
Diverter Function: The built-in diverter allows you to switch water flow between the tub spout and the hand shower. Typically, a small knob or lever on the faucet body controls this function. Pull or push the diverter to select the desired water outlet.
Hand Shower Use: Remove the hand shower from its holder and press the diverter to activate it. Return it to the holder when finished.

Maintenance

Cleaning the Finish: To maintain the Brushed Gold finish, clean regularly with a soft, damp cloth and mild soap. Rinse thoroughly and dry with a soft cloth to prevent water spots.
Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or any products containing bleach, acids, or alcohol, as these can damage the finish.
Aerator Maintenance: Periodically unscrew the aerator from the tub spout and hand shower head to clean any mineral deposits or debris. Rinse under running water and reattach.
Leak Checks: Regularly inspect all connections for any signs of leaks. Tighten connections as needed, but do not overtighten.

Troubleshooting

Problem	Possible Cause	Solution
Low Water Flow	Partially closed shut-off valves Clogged aerator Debris in water lines	Ensure shut-off valves are fully open. Clean the aerator on the spout and hand shower. Flush water lines (consult a plumber if necessary).
Leaking from Spout/Handle	Loose connections Worn O-rings or seals Faulty cartridge	Check and tighten all connections. Replace O-rings or seals (contact customer support for parts). Replace the cartridge (contact customer support for parts).
Diverter Not Working	Debris in diverter mechanism Worn diverter seal	Flush the system. Inspect and clean the diverter. Replace diverter components (contact customer support).

Specifications

Brand: Riobel
Model: TMMSQ39L
Finish: Brushed Gold
Material: Metal (Handle Material: Brass)
Mounting Type: Floor Mount (Single Hole)
Flow Rate: 6 Gallons Per Minute
Included Components: Handle, Shower Arm, Valve, Hand Shower
Installation Method: Floor
UPC: 883186462370

Warranty and Support

Warranty: This Riobel product is covered by a LIMITED LIFETIME WARRANTY. Please refer to the official Riobel warranty documentation for full terms and conditions. The warranty typically covers manufacturing defects under normal use and service.

Customer Support: For technical assistance, replacement parts, or warranty claims, please contact Riobel customer service. Visit the official Riobel website for current contact information and support resources.

Note: Proof of purchase may be required for warranty claims.

	Riobel MM80 Momenti™ Wall Mount Tub Spout - Illustrated Parts List Detailed illustrated parts list for the Riobel MM80 Momenti™ Wall Mount Tub Spout, including part numbers and contact information for warranty and support.
	Riobel TEQ21 Equinox™ Wall Mount Tub Filler Trim Illustrated Parts List Detailed illustrated parts list for the Riobel TEQ21 Equinox™ wall mount thermostatic/pressure balance tub filler trim. Includes part identification, kit numbers, and contact information for warranty and support from Riobel and House of Rohl.
	Riobel 4872 Handshower Set with 36" Slide Bar - Illustrated Parts List Detailed illustrated parts list for the Riobel 4872 handshower set, featuring a 36-inch slide bar and a 5-function handshower. Includes part numbers, kit numbers, and flow rate specifications.
	Riobel Manifesto™ Toilet Paper Holder - Illustrated Parts List Illustrated parts list for the Riobel Manifesto™ Toilet Paper Holder (MF3), providing detailed component identification, kit numbers, and contact information for warranty and support. Includes textual descriptions of the diagram and parts.
	Riobel Wall Mount Faucet Trim Installation Guide Step-by-step instructions for installing the Riobel Wall Mount Faucet Trim (Model INS13860A). Includes parts list, required tools, and detailed assembly guidance.
	Riobel Equinox™ Single Handle Tall Lavatory Faucet Illustrated Parts List Illustrated parts list for the Riobel Equinox™ Single Handle Tall Lavatory Faucet (Model EQL01), providing detailed part numbers, kit numbers, and contact information for warranty and support. Includes descriptions of faucet components and flow rate options.

Riobel TMMSQ39L