Introduction
The Hoofun Flying Orb Ball Toy is a hand-controlled mini drone designed for interactive play. It features various flight modes and LED lights, offering an engaging experience for users aged 6 and up. This manual provides essential information for safe and proper operation, maintenance, and troubleshooting.
Image: The Hoofun Flying Orb Ball Toy, illuminated in pink, showcasing its spherical design and internal propellers.
Package Contents
Verify that all items are present in the package:
- Flying Orb Ball
- USB Charging Cable
- Instruction Manual
Safety Precautions
Read and understand all safety instructions before use.
- This product contains a non-replaceable battery. Do not disassemble the product or allow the battery to get damp.
- If the flying ball toy becomes seriously hot, do not charge it. Allow it to cool down before charging.
- Do not charge the product in extremely hot or cold environments.
- Never charge the product unattended for a long period.
- This toy is not suitable for children under 6 years old.
- The enclosed wheel design protects hands during operation, but caution should always be exercised.
- The magic wand is not included and must be purchased separately if desired.
Setup and Charging
Initial Charge
Before first use, fully charge the Flying Orb Ball. Connect the provided USB charging cable to the orb and a compatible USB power source (e.g., computer, USB wall adapter). A full charge takes approximately 20 minutes and provides about 15 minutes of flying time.
Image: The Flying Orb Ball connected to a laptop via its USB charging cable, illustrating the charging process.
Power On/Off
Locate the power button on the orb. Press and hold to turn it on. The LED lights will illuminate. To turn off, press and hold the power button again.
Image: A finger pressing the power switch located on the top of the Flying Orb Ball.
Operating Instructions
The Hoofun Flying Orb Ball is designed for hand-controlled flight. Different throwing angles and speeds result in various flight paths and tricks.
Starting and Stopping Flight
With the power on, hold the orb upwards. To initiate flight, gently shake or pat the orb. To stop the spinning, shake or pat the orb again while it is upside down.
Image: A four-panel diagram illustrating the actions for starting/stopping, floating, boomerang flight, and straight flight of the orb.
Flight Modes
- Boomerang Fly: Toss the flying toy upwards at a 30-degree angle. It will spin around its axis perpendicular to the direction of flight and return to you.
- Straight Fly: Toss the orb downwards at a 30-degree angle in a horizontal direction. It will travel steadily in a straight line.
- Floating Fly: Place your hand underneath the orb and follow it as it hovers, creating a floating effect.
Image: Two scenarios depicting the orb in straight flight (thrown downwards) and boomerang flight (thrown upwards, returning to the user).
Demonstration Videos
Video: This video demonstrates various flight patterns and tricks that can be performed with the Hoofun Flying Orb Ball, including boomerang throws and passes between users.
Video: This video showcases multiple individuals playing with the Hoofun Flying Orb Ball, highlighting its suitability for group activities and interactive fun.
Maintenance
- Keep the orb clean by wiping it with a dry, soft cloth.
- Avoid exposing the orb to water or excessive moisture.
- Store the orb in a cool, dry place away from direct sunlight when not in use.
- Regularly inspect the protective cage for any damage. While durable, significant impacts can cause wear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Orb does not turn on. | Battery is depleted. | Charge the orb using the provided USB cable for 20 minutes. |
| Orb does not fly or flies erratically. | Insufficient power; improper launch technique. | Ensure the orb is fully charged. Review the "Operating Instructions" for correct shaking and throwing techniques. |
| Orb stops mid-flight unexpectedly. | Low battery; accidental shake/pat. | Recharge the orb. Ensure hands do not accidentally shake or pat the orb during flight. |
| LED lights are not working. | Internal wiring issue; damage. | Ensure the orb is powered on. If the issue persists, contact customer support. |
Specifications
- Product Dimensions: 3.35 x 3.35 x 3.35 inches
- Item Weight: 0.96 ounces
- Batteries: 1 Lithium Ion battery (required, non-replaceable)
- Recommended Age: 6 years and up
- Manufacturer: Flynova (Brand: Hoofun)
- Model Number: B08P46GHB4
Image: An exploded diagram illustrating the internal components of the Flying Orb Ball, including the polypropylene case, lithium battery, motherboard, LED lights, and propeller.
Warranty and Support
Hoofun offers the following support for its products:
- 12-Hour Response
- 7*24 Hour Stand-by
- 24-Month Warranty
- Lifetime After-sales Support
For customer support, please refer to the contact information provided with your purchase or visit the official Hoofun store on Amazon: Hoofun Store.