Transformers F0701

Download PDF
Contents

Transformers War for Cybertron: Kingdom Leader WFC-K28 Galvatron Action Figure Instruction Manual

Model: F0701

Introduction

This manual provides instructions for the Transformers War for Cybertron: Kingdom Leader WFC-K28 Galvatron Action Figure. This G1-inspired toy converts into Galactic cannon mode in 33 steps and comes with a Particle Beam cannon and 2 side cannon accessories that attach in both modes. The Matrix of Leadership accessory can hang around the Galvatron figure’s neck. This figure is part of the Kingdom series, where Maximals and Predacons join the fight with Autobots and Decepticons.

Transformers Kingdom Galvatron in box
Figure 1: Transformers War for Cybertron: Kingdom Leader WFC-K28 Galvatron Action Figure in its packaging.

Safety Information

WARNING: CHOKING HAZARD – Small parts may be generated. Not for children under 3 years.

This product is recommended for ages 8 years and up.

Setup and Transformation

The Galvatron figure transforms between robot mode and Galactic cannon mode in 33 steps. Refer to the included visual instructions on the product packaging for detailed step-by-step guidance. The general process involves articulating various parts of the figure to reconfigure its form.

Robot Mode

In robot mode, Galvatron stands as a 7.5-inch action figure. Attach the Particle Beam cannon and two side cannon accessories to designated ports on the figure. The Matrix of Leadership accessory can be placed around the figure's neck.

Galvatron in robot mode, standing on a rocky terrain
Figure 2: Galvatron in its imposing robot mode, ready for battle.
Galvatron in robot mode holding accessories
Figure 3: Galvatron in robot mode, equipped with its Particle Beam cannon and side cannons.
Close-up of Galvatron's chest with Matrix of Leadership
Figure 4: A close-up view of Galvatron's chest, featuring the Matrix of Leadership accessory.

Galactic Cannon Mode

To transform Galvatron into its Galactic cannon mode, follow the 33 transformation steps outlined in the product's visual instructions. Ensure all parts are securely locked into place to maintain the cannon's structural integrity. The Particle Beam cannon and side cannons can also be attached in this mode.

Galvatron in Galactic cannon mode
Figure 5: Galvatron transformed into its powerful Galactic cannon mode.
Galvatron in Galactic cannon mode, side view
Figure 6: Side view of Galvatron in Galactic cannon mode, showcasing its detailed design.

Operating the Figure

The Galvatron action figure is designed for imaginative play and display. Its joints allow for various poses in robot mode. The accessories can be attached and detached as desired. The transformation mechanism is manual and requires careful manipulation of the figure's parts.

Golden Disk Card

The figure includes a Golden Disk card that reveals a possible destiny of a key character. Collect other Kingdom figures to reveal all three alternate destiny variants for each character.

Maintenance

To ensure the longevity of your Transformers Galvatron figure, follow these maintenance guidelines:

  • Cleaning: Wipe the figure with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the figure away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
  • Handling: Handle the figure by its main body parts. Avoid excessive force when transforming or posing to prevent stress on joints and potential breakage.

Troubleshooting

If you encounter any issues with your Galvatron figure, consider the following:

  • Stiff Joints: If joints are stiff, gently articulate them back and forth. Do not force movement.
  • Transformation Difficulties: Ensure you are following the transformation steps precisely. Refer to the visual instructions provided with the product. Some steps may require specific alignment or pressure.
  • Loose Parts: If a part feels loose, check if it is intended to be detachable or if it needs to be re-seated firmly into a connection point.

Specifications

Feature Detail
Brand Transformers
Model Name GEN WFC K LEADER GALVATRON
Model Number F0701
Figure Type Action Figure
Character Galvatron
Scale 7.5-inch (approximate)
Transformation Steps 33 steps
Included Components Figure, Particle Beam cannon, 2 side cannon accessories, Matrix of Leadership accessory, Golden Disk card
Recommended Age 8 years and up
Material Plastic
Color Gray Violet

Official Product Video

Watch the official product video for a demonstration of the Transformers War for Cybertron Kingdom Galvatron figure.

Video 1: Official demonstration of the Transformers War for Cybertron Kingdom Galvatron figure by VA DISTRIBUTION LLC.

Warranty and Support

Information regarding product warranty and customer support is not available in the provided data. Please refer to the product packaging or the manufacturer's official website for details on warranty coverage and how to contact customer support.

© 2023 Transformers. All rights reserved. Transformers and all related characters are trademarks of Hasbro.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.