Hurom H-200 Electronic Slow Juicer Instruction Manual

Introduction

This manual provides comprehensive instructions for the safe and efficient operation and maintenance of your Hurom H-200 Electronic Slow Juicer. Please read all instructions carefully before first use and retain this manual for future reference.

Product Overview

The Hurom H-200 is a masticating slow juicer designed for efficient juice extraction with minimal oxidation. Key features include a self-feeding hopper and easy-to-clean components.

Figure 1: Hurom H-200 Electronic Slow Juicer, Silver model.

Key Components

• Self-Feeding Hopper: Designed to accommodate whole fruits and vegetables, reducing prep time.
• Easy Clean Chamber: Features grooves instead of holes for simplified rinsing.
• Juice Spout: For dispensing extracted juice.
• Pulp Outlet: For expelling dry pulp.
• Built-In Pulp Container: Collects expelled pulp.
• On/Off Switch: Controls power to the unit.
• BPA-Free, Impact-Resistant ABS Plastic: Durable and safe construction materials.

Figure 2: Labeled diagram of the Hurom H-200 Slow Juicer components.

Setup

Before initial use, ensure all parts are clean. Assemble the juicer by following these steps:

1. Place the main chamber onto the motor base, ensuring it clicks securely into place.
2. Insert the auger (pressing screw) into the center of the chamber. Ensure it sits snugly.
3. Place the mesh screen (sieve) into the chamber, aligning it correctly.
4. Attach the self-feeding hopper unit on top, aligning the handle with the corresponding groove on the base. Rotate the hopper until it locks securely.
5. Place the juice container under the juice spout and the pulp container under the pulp outlet.
6. Connect the power cord to a suitable electrical outlet.

Operating Instructions

The Hurom H-200 is designed for ease of use with its self-feeding hopper.

1. Prepare ingredients: Wash fruits and vegetables thoroughly. For optimal performance and to prevent clogging, it is recommended to cut fibrous ingredients (like celery) into smaller pieces. Hard seeds (e.g., from mangoes) and large pits should be removed.
2. Load the hopper: Place prepared ingredients into the self-feeding hopper. The large opening allows for whole fruits like apples, reducing the need for extensive pre-chopping.
3. Start juicing: Turn the On/Off switch to the "On" position. The juicer will begin processing the ingredients.
4. Collect juice and pulp: Juice will flow from the juice spout into the juice container, and pulp will be expelled into the pulp container.
5. Reverse function: If ingredients become jammed, switch the juicer to the "Rev" (Reverse) position for a few seconds to dislodge them, then return to "On".
6. Finish juicing: Once all ingredients are processed, allow the juicer to run for a short period to extract any remaining juice. Turn the On/Off switch to "Off".

Maintenance and Cleaning

Regular cleaning ensures optimal performance and longevity of your juicer. All removable parts should be hand washed immediately after each use.

1. Disassemble the juicer: Turn off and unplug the unit. Remove the hopper, auger, and chamber components.
2. Rinse components: Rinse all detachable parts under running water. The strainer features grooves instead of holes, making it easy to rinse without scrubbing.
3. Clean pulp outlet: The pulp outlet has a cap that can be opened to remove any remaining pulp residues.
4. Use cleaning brush: Utilize the provided cleaning brush to remove any stubborn pulp from crevices or the strainer.
5. Dry and store: Allow all parts to air dry completely before reassembling or storing.

Note: The juicer components are not dishwasher safe. Hand washing is recommended to ensure longevity.

Troubleshooting

If you encounter issues with your Hurom H-200, refer to the following common solutions:

• Juicer does not turn on: Ensure the unit is properly assembled and all parts are securely locked. The safety features prevent operation if components are not correctly aligned. Check that the power cord is firmly plugged into an active outlet.
• Ingredients are not processing: Use the "Rev" (Reverse) function to dislodge any jammed ingredients, then switch back to "On". Ensure ingredients are cut to an appropriate size, especially fibrous items.
• Excessive pulp in juice: While the H-200 is designed for minimal pulp, some pulp may be present depending on the ingredients. If you prefer completely pulp-free juice, an external fine mesh strainer can be used.
• Low juice yield: Ensure ingredients are fresh. The slow squeeze technology is designed for high yield, but very dry or overripe produce may yield less juice.

Specifications

Warranty and Support

The Hurom H-200 Slow Juicer is backed by a 15-year warranty, reflecting the manufacturer's confidence in its durability and performance. For warranty claims, technical support, or service inquiries, please refer to the contact information provided in your product registration or on the official Hurom website.

Important Safety Information

• Always unplug the juicer before cleaning or disassembling.
• Do not immerse the motor base in water or other liquids.
• Keep hands and utensils away from moving parts during operation.
• Ensure all components are correctly assembled and locked before operating.
• Do not use the appliance if the power cord or plug is damaged.
• This appliance is for household use only.