1. Introduction
The Dogtra YS300 No Bark Collar is designed to help decrease or eliminate excessive barking in small and medium dogs. This compact and ergonomic collar utilizes a Sound Recognition Sensor to accurately distinguish between your dog's bark and other ambient noises, ensuring precise activation. It offers adjustable stimulation levels and is built for durability and reliability.
Key Features:
- Effective Sound Recognition Sensor
- Adjustable 6 Intensity Levels (Low/Medium Correction)
- Vibration Warning before stimulation
- Fully Waterproof Design
- 2-Hour Rapid Charge Rechargeable Battery
- Suitable for dogs 10 pounds and larger
Figure 1: Dogtra YS300 Anti Bark Dog Collar and accessories.
2. Package Contents
Your Dogtra YS300 Anti Bark Collar package includes:
- Dogtra YS300 Anti Bark Collar
- Battery Charger
- PetsTEK Training Clicker
- Owner's Manual (this document)
3. Setup
3.1 Charging the Collar
Before initial use, fully charge the collar's battery. The YS300 features a 2-hour rapid charge rechargeable battery. Connect the charger to the collar's charging port. The indicator light will show charging status.
3.2 Fitting the Collar
Proper fit is crucial for the collar's effectiveness and your dog's comfort. The collar should be snug enough to allow the contact points to make consistent contact with your dog's skin, but not so tight as to restrict breathing or cause discomfort. You should be able to fit one finger snugly between the strap and your dog's neck.
The collar strap can be cut to fit the size of your dog's neck. Ensure the contact points are positioned on the underside of your dog's neck, making direct contact with the skin. For dogs with thick fur, it may be necessary to trim some fur to ensure proper contact.
The collar comes with 5/8” surgical steel contact points, suitable for short to medium fur types. Never leave the bark collar on your dog for more than 10 hours to prevent skin irritation.
Figure 2: Close-up view of the Dogtra YS300 collar unit.
4. Operating the Collar
4.1 Powering On/Off and Adjusting Intensity
The YS300 collar is activated by your dog's bark. It does not require a remote control. To adjust the intensity level, locate the adjustable dial on the collar unit. The collar offers 6 intensity levels, ranging from low to medium correction, plus a vibration-only mode.
Important: Always start at the lowest stimulation level (vibration-only or level 1). If your dog continues to bark excessively, gradually increase the stimulation level one step at a time. Closely monitor your dog's reaction to find the appropriate stimulation level for effective bark control without causing undue stress.
4.2 Sound Recognition Technology
The collar features an advanced Sound Recognition Sensor with a microprocessor. This technology ensures that the collar only activates in response to your dog's unique bark, filtering out other ambient noises like other dogs barking, car horns, or household sounds. This prevents false corrections and ensures fair and effective training.
Each stimulation sequence begins with a vibration warning, followed by the static stimulation if barking continues.
5. Maintenance
To ensure the longevity and proper functioning of your Dogtra YS300 collar, follow these maintenance guidelines:
- Regular Cleaning: Wipe the collar and contact points with a damp cloth periodically to remove dirt and debris. Ensure the contact points are clean for optimal performance.
- Inspect for Wear: Regularly check the collar strap and the main unit for any signs of wear, damage, or loose components.
- Proper Storage: When not in use, store the collar in a dry, cool place away from extreme temperatures.
- Battery Care: Recharge the battery as needed. Avoid completely draining the battery for extended periods to prolong its lifespan.
- Skin Health: Always remove the collar for at least 10 hours every 24-hour period to allow your dog's skin to breathe and prevent pressure sores or irritation. Reposition the collar on your dog's neck daily to distribute pressure.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not activating to bark | Improper fit; Sensor obstructed; Low battery; Incorrect sensitivity setting. | Ensure collar is snug with contact points touching skin. Clean sensor area. Recharge battery. Adjust sensitivity dial to a higher level. |
| Collar activates too frequently (false triggers) | Sensitivity set too high; Collar too loose. | Decrease sensitivity level. Ensure collar is properly fitted. |
| Dog shows no reaction to stimulation | Stimulation level too low; Poor contact with skin; Dog's fur too thick. | Increase stimulation level gradually. Ensure contact points are firmly against skin. Trim fur if necessary. |
| Battery drains quickly | Frequent activation; Aging battery; Not fully charging. | Monitor barking frequency. Ensure full 2-hour charge. If issue persists, contact customer service. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | YS300 (Item model number: AA) |
| Item Weight | 11.3 ounces |
| Item Dimensions (LxWxH) | 9 x 6.5 x 3 inches |
| Batteries | 1 Lithium Polymer battery (included) |
| Material | Alloy Steel |
| Color | Black |
| Target Audience | Dogs (Small to medium breeds with sensitive or normal temperaments) |
| Waterproof | Fully Waterproof |
| Manufacturer | Dogtra |
8. Warranty and Support
The Dogtra YS300 Anti Bark Dog Collar comes with a 1-year warranty from the date of purchase. Additionally, a 30-day satisfaction guarantee is offered. Please retain your proof of purchase for warranty claims.
For any questions, technical assistance, or warranty claims, please contact Dogtra's USA-based customer service. Contact information can typically be found on the official Dogtra website or within the product packaging.
