Dogtra YS600 Anti Bark Collar Instruction Manual

1. Introduction

The Dogtra YS600 No Bark Collar is designed to safely and effectively decrease or eliminate excessive barking in medium to large dogs. This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your YS600 collar to ensure optimal performance and the well-being of your pet.

The YS600 features an accelerometer bark sensor that accurately detects your dog's barking, preventing false corrections from ambient noise. It incorporates a high-performance pager vibration as a warning before any static stimulation, providing a clear signal to your dog. With 10 adjustable intensity levels, you can customize the correction to suit your dog's temperament and responsiveness.

Image: The Dogtra YS600 Anti Bark Collar, shown with its retail packaging and the included PetsTEK clicker. The collar is black with a central receiver unit and contact points.

2. What's in the Box

Upon opening your Dogtra YS600 package, you should find the following components:

• YS600 Anti Bark Collar
• Charger
• PetsTEK Clicker
• Owner's Manual

Image: A detailed view of the YS600 collar, highlighting the LED Indicator Light, the On/Off and Intensity Dial, and the durable Collar Strap.

3. Key Features

The Dogtra YS600 Anti Bark Collar is equipped with several advanced features for effective bark control:

• Ultra-Compact Receiver: Designed for comfort and discretion on your dog.
• Persistent Bark Indicator: Notifies you if the correction level needs adjustment.
• Accelerometer Bark Sensor: Ensures accurate bark detection, minimizing false triggers.
• High-Performance Pager: Provides a clear vibration warning before static stimulation.
• 10 Intensity Levels: Adjustable low to high output to suit various dog temperaments.
• 5/8" Enhanced Contact Points: Made from surgical steel, suitable for short and medium fur.
• 2-Hour Rapid Charge Rechargeable Battery: Ensures the collar is ready when needed.
• Suitable for Dogs 35 lbs and Larger: Designed for medium to large breeds.
• Fully Waterproof: Allows for use in various weather conditions and during water activities.

Image: An infographic detailing the key features of the YS600, including its ultra-compact receiver, waterproof design, 2-hour quick charge, persistent bark indicator, accelerometer bark sensor, high-performance pager, 10 intensity levels, and suitability for dogs 35 lbs and larger.

4. Setup

4.1 Charging the Collar

Before initial use, fully charge the YS600 collar. The 2-hour rapid charge battery ensures quick readiness. A red light will indicate when the battery is low, signaling it's time to recharge.

4.2 Fitting the Collar

Proper fit is crucial for the collar's effectiveness and your dog's comfort. The collar strap is adjustable and can be cut to fit your dog's neck size. Ensure the contact points are touching your dog's skin. The 5/8" surgical steel contact points are suitable for dogs with short to medium fur.

The collar should be snug enough that the contact points make reliable contact with the skin, but not so tight as to cause discomfort or restrict breathing. You should be able to fit one or two fingers snugly between the collar strap and your dog's neck.

4.3 Initial Intensity Setting

When first using the YS600 anti bark collar, always start at the lowest stimulation level (Level 1). Observe your dog's reaction. If your dog continues to bark without responding, gradually increase the stimulation level one step at a time. Closely monitor your dog’s reaction to find the right stimulation level for your dog. The goal is to find the lowest effective level that deters barking.

5. Operating Instructions

5.1 Turning On/Off and Adjusting Intensity

The YS600 collar features an On/Off and Intensity Dial on the top of the receiver unit. To turn the collar on, rotate the dial from the "OFF" position to your desired intensity level (1-10) or the "P" (Pager) setting. A green flashing light indicates the collar is on and ready for use.

The "P" setting provides a high-performance pager vibration warning without static stimulation. This can be used as an initial deterrent or for sensitive dogs. Levels 1-10 provide increasing levels of static stimulation, preceded by the pager vibration.

5.2 Bark Detection and Correction

The accelerometer bark sensor ensures that the collar only reacts to your dog's barking and is not triggered by ambient noise. When your dog barks, the collar will first emit a vibration warning. If barking continues, it will then deliver the static stimulation at the selected intensity level.

5.3 Persistent Bark Indicator

The persistent bark indicator will illuminate if your dog has barked excessively while wearing the collar, suggesting that you may need to increase the correction level to a more effective setting.

5.4 Using the PetsTEK Clicker for Training

The included PetsTEK Clicker can be used for positive reinforcement training. When your dog exhibits desired quiet behavior, use the clicker and immediately reward them with a treat or praise. This helps associate quietness with positive outcomes.

Image: A dog wearing the Dogtra YS600 Anti Bark Collar, demonstrating how the collar appears when properly fitted.

6. Maintenance

6.1 Daily Care

To ensure the longevity and proper function of your YS600 collar, it is important to maintain it regularly:

• Charging: Keep the collar charged. The battery typically lasts about a week with consistent use.
• Cleaning: Rinse off any dirt or debris from the collar and receiver unit.
• Inspection: Regularly check the collar for any signs of wear or damage, especially the contact points and strap.

6.2 Important Usage Guidelines

To prevent skin irritation and ensure your dog's comfort, never leave the bark collar on your dog for more than 10 hours at a time. It is recommended to reposition the collar on your dog's neck every few hours to prevent pressure sores.

7. Troubleshooting

If you encounter issues with your Dogtra YS600 Anti Bark Collar, consider the following common troubleshooting steps:

• Collar not activating:
  • Ensure the collar is fully charged. A red light indicates a low battery.
  • Verify the intensity dial is set to an active level (1-10) or "P" and not "OFF" or "T" (Test).
  • Check that the contact points are making proper contact with your dog's skin. Adjust the collar's fit if necessary.
• Dog not responding to correction:
  • Gradually increase the intensity level. Start at the lowest effective level and increase as needed.
  • Ensure the contact points are clean and free of debris, and that they are making good contact with the skin.
  • Consider if the dog's fur is too thick for the standard contact points. Longer contact points may be available from Dogtra.
• False activations:
  • The YS600 has an accelerometer bark sensor to prevent false activations. Ensure the collar is fitted snugly to prevent excessive movement that might mimic barking.
  • If issues persist, contact customer support.

For more detailed troubleshooting or persistent issues, please refer to the full Owner's Manual or contact Dogtra customer service.

8. Specifications

9. Warranty and Support

The Dogtra YS600 Anti Bark Collar comes with a 1-year warranty and a 30-day satisfaction guarantee. Dogtra is committed to providing top-notch customer service.

For any questions, technical assistance, or warranty claims, please contact Dogtra's USA-based customer service. Contact information can be found in your Owner's Manual or on the official Dogtra website.

This product is manufactured in South Korea.