BAOSHISHAN Fume Extractor (Model FBA-WLS-217) Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective operation and maintenance of your BAOSHISHAN Fume Extractor, Model FBA-WLS-217. This device is designed to absorb and filter harmful fumes and smoke generated during various processes such as soldering, welding, and electronic repairs, ensuring a cleaner and safer working environment.

2. Product Features

• Compact Design: The fume extractor measures 185x185x85mm, offering a small footprint suitable for various workspaces without obstructing tasks.
• Advanced Filtration System: Features a 3-stage filtration system including a high-density pre-filter for PM50, a HEPA filter for PM0.5, and an activated carbon filter for harmful gases, ensuring comprehensive air purification.
• Efficient Purification: Designed for rapid smoke absorption and high purification rates. For optimal performance, position the extractor close to the work area.
• Flexible Gooseneck Arm: The telescopic and deformable tube can be adjusted to various positions and maintains its shape without additional support, providing versatile fume capture.
• Adjustable Suction: Equipped with a rotary switch to control the absorption intensity from 0-100%, allowing precise adjustment for different applications.
• Versatile Applications: Suitable for soldering, DIY projects, and maintenance of electronic devices such as smartphones and computers.

3. Setup Instructions

1. Unpack Components: Carefully remove all items from the packaging. Verify that all parts are present: main unit, flexible gooseneck arm, and power adapter.
2. Install Filters: Open the filter compartment on the main unit. Insert the 3-stage filters in the correct order: pre-filter, HEPA filter, and activated carbon filter. Ensure they are seated properly.
3. Attach Flexible Arm: Securely attach the flexible gooseneck arm to the designated port on the top of the main unit.
4. Position the Unit: Place the fume extractor on a stable, flat surface near your work area.
5. Connect Power: Plug the power adapter into the unit and then into a suitable power outlet (110 Volts AC).

Figure 3.1: Filter Installation Diagram

Figure 3.2: Flexible Arm Adjustment

4. Operating Instructions

1. Power On: Turn the power switch to the 'ON' position. The digital display will illuminate.
2. Adjust Suction: Rotate the control knob to adjust the fan speed and suction intensity. The digital display indicates the current suction level. Start with a lower setting and increase as needed.
3. Position the Arm: Bend the flexible gooseneck arm so that the intake hood is positioned approximately 5-6 inches (12-15 cm) from your work area. This ensures optimal capture of fumes and smoke.
4. Begin Work: Proceed with your soldering, welding, or other fume-producing tasks. The extractor will continuously draw in and filter the air.
5. Power Off: After use, turn the control knob to the minimum setting, then switch the power off.

Figure 4.1: Suction Adjustment Control

Figure 4.2: Fume Extractor in Use

Figure 4.3: Optimal Fume Capture Distance

5. Maintenance

Regular maintenance ensures the longevity and efficiency of your fume extractor. The primary maintenance task is filter replacement.

5.1 Filter Replacement

The 3-stage filter system requires periodic replacement to maintain optimal air purification. The frequency depends on usage and the type of fumes being extracted.

1. Power Off and Unplug: Before replacing filters, ensure the unit is powered off and unplugged from the electrical outlet.
2. Open Filter Compartment: Locate and open the filter compartment cover on the main unit.
3. Remove Old Filters: Carefully remove the used filters. Dispose of them according to local regulations for hazardous waste, especially if used for lead-based soldering.
4. Insert New Filters: Place new filters into the compartment in the correct order: first the high-density pre-filter, then the HEPA filter, and finally the activated carbon filter. Ensure they fit snugly.
5. Close Compartment: Securely close the filter compartment cover.

Figure 5.1: Filter Layers

5.2 Cleaning

Wipe the exterior of the unit and the flexible arm with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the internal components.

6. Troubleshooting

• Unit Does Not Power On:
  • Check if the power adapter is securely plugged into both the unit and the electrical outlet.
  • Ensure the power switch is in the 'ON' position.
  • Verify the electrical outlet is functional by testing with another device.
• Weak Suction:
  • Ensure the flexible arm is positioned close enough to the fume source (5-6 inches).
  • Check if the filters are clogged and require replacement.
  • Verify the suction control knob is set to an appropriate level.
  • Ensure the filter compartment cover is securely closed.
• Unusual Noise:
  • Check for any obstructions in the fan or flexible arm.
  • Ensure the unit is placed on a stable surface to prevent vibrations.

7. Specifications