1. Introduction
Thank you for choosing the LOMI Sunrise Alarm Clock with Himalayan Salt Pebble Base. This device combines a digital alarm clock with a natural sunrise simulation and the soothing glow of Himalayan salt. Please read this manual carefully to ensure proper use and maintenance of your product.
Safety Information
- Ensure the device is placed on a stable, flat surface.
- Keep away from water or excessive humidity.
- Use only the provided power adapter.
- Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
- Keep out of reach of children.
2. Package Contents
- LOMI Sunrise Alarm Clock (LOMD1082WD)
- Power Adapter
- User Manual
3. Product Overview
Figure 3.1: Front view of the LOMI Sunrise Alarm Clock, displaying the time and the illuminated Himalayan salt base.
Figure 3.2: Top and rear view of the LOMI Sunrise Alarm Clock, illustrating the control buttons and connectivity ports.
Components and Controls
- Digital Display: Shows time, temperature, and alarm status.
- Himalayan Salt Pebble Base: Provides ambient light and aesthetic appeal.
- Control Buttons (Top/Rear):
- SET Button: Enters setting mode for time, alarm, etc.
- UP/DOWN Buttons: Adjust values during setting mode or brightness/volume.
- ALARM Button: Activates/deactivates alarm and enters alarm setting mode.
- LIGHT Button: Controls the salt lamp brightness and color.
- SNOOZE/LIGHT Button: Activates snooze during an alarm; also controls light.
- Power Port: For connecting the power adapter.
- USB Ports: For charging external devices (if available, refer to Figure 3.2).
4. Setup
4.1 Power Connection
- Connect the power adapter to the power port on the back of the alarm clock.
- Plug the adapter into a standard electrical outlet. The display will illuminate.
4.2 Initial Time Setting
- Press and hold the SET button for 3 seconds to enter time setting mode. The hour digits will flash.
- Use the UP or DOWN buttons to adjust the hour.
- Press SET again to confirm the hour and move to minute setting. The minute digits will flash.
- Use the UP or DOWN buttons to adjust the minutes.
- Press SET again to confirm and exit time setting mode.
5. Operating Instructions
5.1 Setting the Alarm
- Press and hold the ALARM button for 3 seconds. The alarm hour digits will flash.
- Use the UP or DOWN buttons to set the desired alarm hour.
- Press ALARM again to confirm the hour and move to minute setting.
- Use the UP or DOWN buttons to set the desired alarm minutes.
- Press ALARM again to confirm and exit alarm setting mode. The alarm icon will appear on the display, indicating the alarm is active.
5.2 Activating/Deactivating Alarm
Briefly press the ALARM button to toggle the alarm on or off. The alarm icon on the display indicates its status.
5.3 Sunrise Simulation
The alarm clock features a real sunrise simulation. Approximately 30 minutes before your set alarm time, the Himalayan salt light will gradually increase in brightness, mimicking a natural sunrise to gently wake you up. The light will reach its full brightness at the alarm time.
5.4 Light Control (Himalayan Salt Lamp)
- Briefly press the LIGHT button to turn the Himalayan salt lamp on or off.
- When the light is on, press and hold the LIGHT button to cycle through brightness levels or color options (if available). Release the button at your desired setting.
5.5 Temperature Display
Figure 5.1: The alarm clock displaying the temperature in Fahrenheit.
The clock displays the ambient temperature. To switch between Celsius (℃) and Fahrenheit (℉), briefly press the DOWN button when not in setting mode.
5.6 Snooze Function
When the alarm sounds, briefly press the SNOOZE/LIGHT button to activate the snooze function. The alarm will pause for approximately 9 minutes and then sound again. You can repeat the snooze function multiple times. To turn off the alarm completely, press any other button (e.g., ALARM or SET).
6. Maintenance
6.1 Cleaning the Device
- Unplug the device before cleaning.
- Wipe the exterior with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals.
6.2 Himalayan Salt Base Care
- The Himalayan salt is sensitive to moisture. Keep the device in a dry environment.
- If the salt appears dusty, gently wipe it with a slightly damp (not wet) cloth, then immediately dry it.
- Do not immerse the salt base in water.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Power adapter not connected or faulty. | Ensure the power adapter is securely connected to the device and a working outlet. Try a different outlet. |
| Alarm does not sound. | Alarm is not activated. | Press the ALARM button to activate the alarm. Ensure the alarm icon is visible on the display. |
| Sunrise simulation not working. | Alarm is not set or active. | Ensure the alarm is set and active. The simulation begins 30 minutes before the set alarm time. |
| Display is dim or unreadable. | Brightness setting is too low. | Adjust the display brightness using the appropriate control (refer to section 3 for button functions). |
8. Specifications
| Feature | Detail |
|---|---|
| Model | LOMD1082WD |
| Brand | LOMI |
| Dimensions (L x W x H) | 22.9 cm x 14 cm x 8.9 cm (approx. 9" x 5.5" x 3.5") |
| Weight | Approx. 0.8 kg (1.8 lbs) |
| Materials | 75% Plastic, 15% Salt, 10% Metal |
| Display Type | Digital LED |
| Power Source | Corded Electric |
| Special Features | Alarm, Snooze, Sunrise Simulation, Temperature Display (℃/℉) |
9. Warranty and Support
LOMI products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official LOMI website.