1. Introduction
Thank you for choosing the Beliani Howick Modern Shower Column. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new shower system. Please read this manual thoroughly before installation and keep it for future reference.
1.1 Safety Information
- Ensure all local plumbing and building codes are followed during installation.
- Turn off the main water supply before beginning any installation or maintenance.
- Use appropriate tools and wear safety glasses during installation.
- Do not overtighten connections, as this may damage the product.
- If you are unsure about any part of the installation, consult a qualified plumber.
2. Product Overview
The Beliani Howick Modern Shower Column is a sophisticated and functional addition to any bathroom, featuring a rain shower head, a hand shower, and a mixer faucet, all finished in elegant chrome.
Figure 2.1: Front view of the Beliani Howick Modern Shower Column, showcasing the main rain shower head, adjustable hand shower, and integrated mixer faucet.
Figure 2.2: The shower column installed in a contemporary bathroom setting with white marble-patterned tiles, demonstrating its aesthetic integration.
2.1 Components
- Rain Shower Head (Square)
- Adjustable Hand Shower with Hose
- Integrated Mixer Faucet
- Diverter Knob (to switch between shower head and hand shower)
- Mounting Hardware
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | 235002 |
| Brand | Beliani |
| Material | Brass, Chromed Finish |
| Dimensions (Overall) | Approximately 36 cm (W) x 20 cm (D) x 83-115 cm (H) |
| Weight | 4.15 kg |
| Number of Handles | 3 (for hot, cold, and diverter) |
| ASIN | B08NXHLRB1 |
Figure 3.1: Detailed dimensional drawing of the shower column, including measurements for the main column height (83-115 cm), shower head width (36 cm), and hand shower length (24 cm).
4. Setup and Installation
Professional installation is recommended for this product. Ensure you have all necessary tools and components before starting.
4.1 Tools Required (Not Included)
- Adjustable Wrench
- Screwdriver (Phillips and Flathead)
- Drill with appropriate drill bits
- Level
- Measuring Tape
- Pencil
- Thread Seal Tape (Teflon Tape)
4.2 Pre-Installation Steps
- Turn off Water Supply: Locate the main water shut-off valve for your home and turn it off. Open a faucet to drain any remaining water from the pipes.
- Inspect Components: Unpack all components and check for any damage or missing parts. Refer to the parts list (if provided with the product packaging).
- Prepare Wall: Ensure the wall surface where the shower column will be mounted is clean, dry, and structurally sound.
4.3 Installation Procedure
- Mount the Mixer Faucet: Attach the main mixer faucet unit to the existing hot and cold water outlets on your wall. Use thread seal tape on the pipe threads to ensure a watertight seal. Tighten connections securely with an adjustable wrench, but do not overtighten.
- Install the Main Column: Secure the main vertical column to the mixer faucet and the upper wall bracket. Use a level to ensure the column is perfectly vertical before marking and drilling holes for the upper bracket.
- Attach Rain Shower Head: Connect the square rain shower head to the top arm of the column. Ensure the connection is tight and sealed.
- Connect Hand Shower: Attach the flexible hose to the hand shower outlet on the mixer and to the hand shower itself. Place the hand shower in its adjustable holder on the main column.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, turn off the water, tighten the connection, and re-test.
- Functionality Test: Test the flow from both the rain shower head and the hand shower, and ensure the diverter knob functions correctly.
5. Operating Instructions
Using your Beliani Howick shower column is straightforward.
5.1 Water Flow and Temperature Control
- Temperature Control: Use the left handle on the mixer faucet to adjust the water temperature. Turn towards red for hot water and towards blue for cold water.
- Flow Control: Use the right handle on the mixer faucet to control the water flow intensity.
5.2 Shower Outlet Selection (Diverter)
- The central knob on the mixer faucet acts as a diverter.
- Turn the knob to select between the main rain shower head and the hand shower.
- Ensure the water is flowing before switching the diverter to avoid sudden pressure changes.
Figure 5.1: Close-up view of the mixer faucet with its three handles (hot, cold, diverter) and the attached hand shower, illustrating the control points.
Figure 5.2: Underside view of the square rain shower head, showing the evenly distributed nozzles for a consistent water flow.
6. Maintenance and Care
Proper maintenance will ensure the longevity and optimal performance of your shower column.
6.1 Cleaning
- Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive bathroom cleaner.
- Avoid using abrasive cleaners, scouring pads, or harsh chemicals (e.g., ammonia, bleach) as they can damage the finish.
- For hard water spots, use a solution of white vinegar and water (1:1 ratio), apply with a soft cloth, let it sit for a few minutes, then rinse thoroughly and dry.
- Periodically clean the nozzles of the shower heads by gently rubbing them to dislodge any mineral buildup.
6.2 General Care
- Check hose connections periodically for any signs of wear or leaks.
- Ensure the hand shower hose is not kinked or twisted during use or storage.
7. Troubleshooting
This section addresses common issues you might encounter with your shower column.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Clogged shower head nozzles; partially closed shut-off valve; mineral buildup in pipes. | Clean shower head nozzles. Ensure all shut-off valves are fully open. Consider professional descaling if buildup is severe. |
| Leaks at Connections | Loose connections; insufficient thread seal tape; damaged washers/gaskets. | Turn off water supply. Tighten connections. Reapply thread seal tape. Replace worn washers/gaskets. |
| Water Temperature Fluctuations | Issues with water heater; unbalanced water pressure. | Check water heater settings. Consult a plumber to balance water pressure. |
| Diverter Not Switching Properly | Mineral buildup inside diverter mechanism. | Attempt to flush by rapidly switching the diverter. If issue persists, professional service may be required. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Beliani customer support.
8. Warranty and Support
Beliani stands behind the quality of its products.
8.1 Warranty Information
For detailed warranty terms and conditions, please refer to the warranty card included with your product packaging or visit the official Beliani website. Keep your proof of purchase for warranty claims.
8.2 Customer Support
If you require assistance with installation, troubleshooting, or have any questions regarding your Beliani Howick Modern Shower Column, please contact Beliani customer support:
- Website: www.beliani.pl (Please check your regional Beliani website for specific contact details)
- Email: Refer to website for contact email.
- Phone: Refer to website for contact phone number.
When contacting support, please have your model number (235002) and ASIN (B08NXHLRB1) ready.