1. Product Overview
The BSTUOKEY K8EM is a standalone 125Khz RFID Access Control Keypad designed for secure entry management. It supports up to 2000 users and offers multiple unlocking methods including RFID card, PIN, or a combination of both. The keypad features Wiegand 26 input and output, allowing it to function as a standalone unit or as a card reader connected to an access control panel. It also includes support for electric locks, magnetic locks, doorbells, and exit buttons.
Image 1: BSTUOKEY K8EM Access Control Keypad. This image shows the front view of the access control keypad with its numeric keys and RFID reader icon.
2. Package Contents
- 1 x BSTUOKEY K8EM Access Control Keypad
- 10 x 125Khz RFID Keychains (may vary)
- Mounting Screws and Wall Plugs
- Wiring Harness
Image 2: Access Control Keypad with 10 RFID Keychains. This image displays the keypad alongside ten blue RFID keychains, indicating included accessories.
3. Specifications
| Parameter | Value |
|---|---|
| Working Voltage | DC 12-24V |
| Card Reading Distance | 1-3 cm |
| Working Temperature | -40°C ~ 60°C |
| Lock Output Load | ≤ 3A |
| Standby Current | ≤ 30mA |
| User Capacity | 2000 users |
| Working Humidity | 10% ~ 90% |
| Door Relay Time | 0-99 seconds (Adjustable) |
| Dimensions | 11.5cm x 7.4cm x 1.7cm (4.53 x 2.91 x 0.67 inches) |
| Wiegand Interface | Wiegand 26 Input/Output |
Image 3: Product parameters and dimensions. This image shows the physical dimensions of the keypad and a table listing its technical specifications.
4. Installation
Proper installation is crucial for the optimal performance and security of your access control system. Ensure all power is disconnected before beginning installation.
4.1 Mounting the Keypad
- Choose a suitable location near the door, ensuring it is protected from direct weather exposure if installed outdoors.
- Mark the drilling points for the mounting screws using the keypad as a template.
- Drill holes and insert wall plugs if necessary.
- Secure the keypad to the wall using the provided screws.
4.2 Wiring Connections
Refer to the "Line Sequence Diagram" and "Product Wiring Diagram" for detailed connection instructions. Incorrect wiring can damage the device or connected components.
Image 4: Line sequence diagram. This diagram illustrates the color-coded wires and their corresponding functions (e.g., Red for +12V, Black for GND, Yellow for OPEN).
Image 5: Product wiring diagram. This comprehensive diagram shows how to connect the access controller to a power supply, electric lock, doorbell, and exit button.
Key Wiring Connections:
- Power Supply: Connect the Red wire to +12V and the Black wire to GND from your DC 12-24V power source.
- Electric Lock:
- For Normally Open (NO) locks: Connect the Blue wire (NO) and Purple wire (COM) to the lock.
- For Normally Closed (NC) locks: Connect the Orange wire (NC) and Purple wire (COM) to the lock.
- Exit Button: Connect the Yellow wire (OPEN) and Black wire (GND) to the exit button.
- Doorbell: Connect the Pink wires (BELL-A, BELL-B) to your doorbell unit.
- Wiegand Interface: Green (DO) and White (D1) for Wiegand 26 input/output when connecting to an external access control panel.
5. Basic Operation
The BSTUOKEY K8EM supports multiple methods for unlocking the door.
Image 6: Two unlocking methods. This image visually demonstrates unlocking the door using a password entered on the keypad and by swiping a 125Khz RFID card.
5.1 Unlocking with Password
- Enter your 4-6 digit user PIN code.
- Press the # key.
- The door will unlock for the set relay time.
5.2 Unlocking with RFID Card
- Present your registered 125Khz RFID card to the keypad's reader area.
- The door will unlock for the set relay time.
5.3 Unlocking with Card + PIN
- Present your registered 125Khz RFID card to the keypad's reader area.
- Within 5 seconds, enter your 4-6 digit user PIN code.
- Press the # key.
- The door will unlock for the set relay time.
5.4 Using the Exit Button
If an exit button is connected, simply press the button to momentarily unlock the door from the inside.
5.5 Doorbell Function
Press the bell icon key on the keypad to activate the connected doorbell.
Video 1: Demonstration of RFID Card, Password, Exit Button Unlocking, and Doorbell Function. This video illustrates the various methods of operating the BSTUOKEY K8EM access control system, including swiping an RFID card, entering a password, using an exit button, and activating the doorbell.
6. Programming Instructions
All programming operations are performed in programming mode. The default Master PIN is 123456.
6.1 Enter/Exit Programming Mode
- To Enter: Press # + Master PIN (default 123456) + #. The indicator light will turn green.
- To Exit: Press #. The indicator light will turn red.
6.2 Change Master PIN
- Enter Programming Mode.
- Press 0.
- Enter new 6-digit Master PIN.
- Enter new 6-digit Master PIN again to confirm.
- Exit Programming Mode.
6.3 Add User Cards/PINs
The keypad supports 2000 users. Each user is assigned a User ID (1-2000).
Method 1: Add Single Card
- Enter Programming Mode.
- Press 1.
- Enter a 3-digit User ID (e.g., 001 for User 1).
- Present the RFID card to be added to the keypad.
- The keypad will beep to confirm.
- To add more cards, repeat steps 3-4.
- Exit Programming Mode.
Method 2: Add Multiple Cards (Sequential)
- Enter Programming Mode.
- Press 2.
- Present the first RFID card to be added.
- Present subsequent RFID cards one by one.
- When finished, press # to save and exit this mode.
- Exit Programming Mode.
Method 3: Add User PIN
- Enter Programming Mode.
- Press 1.
- Enter a 3-digit User ID (e.g., 002 for User 2).
- Enter a 4-6 digit user PIN.
- Press #.
- Enter the same user PIN again to confirm.
- Press #.
- Exit Programming Mode.
Method 4: Add Card + PIN User
- Enter Programming Mode.
- Press 1.
- Enter a 3-digit User ID.
- Present the RFID card.
- Enter a 4-6 digit user PIN.
- Press #.
- Enter the same user PIN again to confirm.
- Press #.
- Exit Programming Mode.
6.4 Delete User Cards/PINs
Method 1: Delete by User ID
- Enter Programming Mode.
- Press 3.
- Enter the 3-digit User ID to delete.
- Press #.
- Exit Programming Mode.
Method 2: Delete by Card
- Enter Programming Mode.
- Press 4.
- Present the RFID card to be deleted to the keypad.
- The keypad will beep to confirm deletion.
- To delete more cards, repeat step 3.
- Exit Programming Mode.
6.5 Set Door Relay Time
This sets how long the door remains unlocked after a valid entry (0-99 seconds).
- Enter Programming Mode.
- Press 5.
- Enter a 2-digit time (e.g., 05 for 5 seconds).
- Press #.
- Exit Programming Mode.
6.6 Set Access Mode
This determines how users can unlock the door.
- Enter Programming Mode.
- Press 6.
- Choose one of the following options:
- 0: Card or PIN (default)
- 1: Card only
- 2: PIN only
- 3: Card + PIN
- Press #.
- Exit Programming Mode.
6.7 Factory Reset
This will delete all user data and restore the Master PIN to 123456. Use with caution.
- Disconnect power from the keypad.
- Press and hold the # key.
- While holding #, reconnect power.
- Release the # key after a few seconds.
- The keypad will beep to confirm the reset.
7. Maintenance
- Clean the keypad surface with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Regularly check wiring connections for any signs of wear or damage.
- Ensure the keypad is free from obstructions that might interfere with card reading or button presses.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad does not power on. | No power supply or incorrect wiring. | Check power connections (Red to +12V, Black to GND). Ensure power supply is active. |
| Door does not unlock with valid card/PIN. | Incorrect access mode, lock wiring issue, or user not registered. | Verify access mode (Section 6.6). Check lock wiring (NO/NC). Ensure card/PIN is correctly registered (Section 6.3). |
| Cannot enter programming mode. | Incorrect Master PIN or sequence. | Ensure you are using the correct Master PIN (default 123456). Follow the sequence: # + Master PIN + #. If forgotten, perform a factory reset (Section 6.7). |
| Doorbell does not ring. | Doorbell unit not connected or faulty. | Check doorbell wiring (Pink wires). Test the doorbell unit independently. |
9. Safety Information
- Always disconnect power before performing any wiring or maintenance.
- Ensure all wiring is done by a qualified professional if you are unsure.
- Do not expose the device to extreme temperatures, humidity, or corrosive environments.
- This device provides access control and should be integrated into a comprehensive security system for high-security applications.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policy or contact BSTUOKEY customer service through their official channels.