Beyblade BEY PRO Command Dragon Instruction Manual

Introduction

The Beyblade BEY PRO Command Dragon is a high-performance battling top designed for competitive play. This manual will guide you through the assembly, operation, and care of your new Beyblade, ensuring optimal performance and longevity.

What's Included

• Beyblade BEY PRO Command Dragon Battling Top
• Launcher
• Sticker Sheet
• Instruction Sheet

Figure 1: Beyblade BEY PRO Command Dragon Battling Top and Launcher.

Safety Information

WARNING: CHOKING HAZARD – Small parts may be generated. Not for children under 3 years.

Setup

To assemble your Beyblade BEY PRO Command Dragon, follow these steps:

1. Attach the GT Chip (Dragon) to the Energy Layer Base (Command). Ensure it clicks securely into place.
2. Connect the Forge Disc (Vanguard-P D75-P) to the assembled Energy Layer.
3. Attach the Performance Tip (Quick' PR-12) to the Forge Disc. Ensure all parts are firmly connected.
4. Apply the included stickers to your Beyblade for customization, following the guide on the sticker sheet.

Figure 2: Component breakdown of the Beyblade BEY PRO Command Dragon.

Figure 3: Individual components of the Beyblade BEY PRO Command Dragon.

Operating Instructions

To launch your Beyblade and begin battling:

1. Attach your assembled Beyblade to the launcher. Ensure it is securely locked.
2. Hold the launcher over a Beyblade Burst Beystadium (sold separately).
3. Pull the ripcord firmly to launch your Beyblade into the Beystadium.

Beyblade Burst tops can