1. Product Overview
The Yamaha DTX-PRO is an advanced electronic drum trigger module designed to provide high-quality sounds and extensive creative control for drummers. It is a core component of the DTX8 Series Electronic Drums, offering a rich sound palette and realistic ambience.
This module integrates with various drum pads, including 2-ply mesh and TCS pads, supporting positional sensing for enhanced expressiveness, particularly on ride cymbals and TCS snares. The DTX-PRO module is engineered to deliver a natural feel and response, complementing the aesthetic and tactile qualities of Yamaha's acoustic drum heritage.
Figure 1.1: The Yamaha DTX-PRO Electronic Drum Trigger Module. This image displays the front panel of the module with its various controls and display screen.
2. Setup Guide
Follow these steps to properly set up your DTX-PRO Electronic Drum Trigger Module.
2.1 Unpacking and Inspection
- Carefully remove the DTX-PRO module from its packaging.
- Verify that all included components are present. The module typically includes a power adapter and may include a snare cable for connection to a compatible snare pad.
- Inspect the module for any signs of damage that may have occurred during shipping.
2.2 Connecting Drum Pads and Cymbals
- Connect your electronic drum pads and cymbals to the corresponding trigger input jacks on the rear panel of the DTX-PRO module. Refer to the labels on the module for correct connections (e.g., Snare, Kick, Tom1, Hi-Hat, Crash, Ride).
- Ensure all cables are securely connected to prevent signal loss or intermittent triggering.
2.3 Power Connection
- Connect the supplied AC power adapter to the DC IN jack on the DTX-PRO module.
- Plug the other end of the power adapter into a suitable electrical outlet.
- Ensure the module's power switch is in the OFF position before connecting to power.
2.4 Audio Output Connections
- For stereo output, connect the L/MONO and R OUTPUT jacks to your amplifier, mixer, or audio interface using appropriate audio cables.
- For headphone monitoring, connect your headphones to the PHONES jack.
2.5 USB Connectivity
The DTX-PRO module features a USB connector for connection to a computer. This allows for MIDI data transfer, audio recording, and potential firmware updates. Connect a standard USB cable from the module to your computer.
3. Basic Operation
This section covers the fundamental functions of the DTX-PRO module.
3.1 Powering On/Off
- To power on, press the POWER switch. The display will illuminate.
- To power off, press the POWER switch again.
3.2 Kit Selection
The DTX-PRO module comes with 40 new preset kits and supports up to 200 user kits. Use the dedicated KIT selection buttons or the main dial to browse and select different drum kits. The display will show the name of the currently selected kit.
3.3 Voice Selection and Editing
The module contains over 700 new voices. To select or edit individual voices within a kit:
- Select the desired drum kit.
- Access the voice editing menu (refer to the full manual for specific button presses).
- Choose the pad whose voice you wish to change.
- Browse through the available voices and assign them to the pad.
3.4 Using the Kit Modifier
The DTX-PRO features a unique Kit Modifier function, utilizing the AMBIENCE, COMP (Compressor), and EFFECT knobs. These knobs allow for real-time sound shaping and creative expression:
- AMBIENCE: Adjusts the amount of room ambience, replicating the sound and feel of drums recorded in world-renowned studios.
- COMP: Controls the compression applied to the overall kit sound, affecting dynamics and punch.
- EFFECT: Modifies the intensity of various built-in effects, allowing for further sound customization.
Experiment with these knobs to create your own unique drum sounds and textures.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your DTX-PRO module.
4.1 Cleaning
- Wipe the exterior of the module with a soft, dry cloth.
- For stubborn dirt, slightly dampen the cloth with water and a mild detergent, then wipe dry immediately.
- Do not use abrasive cleaners, solvents, or alcohol, as these can damage the finish.
4.2 Storage
- Store the module in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Avoid placing heavy objects on top of the module.
- If storing for an extended period, disconnect the power adapter.
4.3 Firmware Updates
Periodically check the official Yamaha website for firmware updates. Updates can provide new features, improvements, and bug fixes. Follow the instructions provided by Yamaha for any firmware update procedures.
5. Troubleshooting
This section addresses common issues you might encounter with your DTX-PRO module.
5.1 No Power
- Ensure the power adapter is securely connected to both the module and a working electrical outlet.
- Verify that the power switch on the module is in the ON position.
- Test the electrical outlet with another device to confirm it is functional.
5.2 No Sound Output
- Check the volume levels on the DTX-PRO module, your amplifier/mixer, and headphones.
- Ensure all audio cables are correctly and securely connected to the OUTPUT jacks and your audio system.
- Verify that the correct input is selected on your amplifier or mixer.
- If using headphones, ensure they are fully plugged into the PHONES jack.
5.3 Pads Not Triggering or Incorrectly Triggering
- Confirm that the trigger cables are securely connected to both the drum pads and the corresponding input jacks on the module.
- Check the sensitivity settings for the individual pads within the module's settings. Adjust as necessary.
- Ensure the correct pad type is assigned to each input in the module's settings.
- Inspect drum pads and cables for any physical damage.
5.4 USB Connection Issues
- Ensure the USB cable is properly connected to both the module and your computer.
- Try a different USB port on your computer.
- Install any necessary drivers for the DTX-PRO module on your computer (available from the Yamaha website).
- Restart both the module and your computer.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | Electronic Drum Trigger Module |
| Item Model Number | DTX-PRO |
| Brand | Yamaha |
| UPC | 889025125871 |
| Item Weight | 5.6 Pounds (2.54 kg) |
| Product Dimensions (L x W x H) | 10.5 x 16.5 x 6.75 inches (26.7 x 41.9 x 17.1 cm) |
| Color | Black |
| Material Type | Wood (referring to associated drum shells) |
| Connector Type | USB |
| Preset Kits | 40 |
| User Kits | 200 |
| Voices | Over 700 |
| Kit Modifier | AMBIENCE, COMP, EFFECT knobs |
7. Warranty and Support
7.1 Warranty Information
For detailed warranty information regarding your Yamaha DTX-PRO Electronic Drum Trigger Module, please refer to the warranty card included with your product or visit the official Yamaha website. Warranty terms and conditions may vary by region and purchase date.
7.2 Customer Support
If you require further assistance, technical support, or have questions not covered in this manual, please contact Yamaha customer support. You can find contact information, FAQs, and additional resources on the official Yamaha website: www.yamaha.com.
