VOOPOO Argus Kit 40W
VOOPOO Argus Kit 40W Pod Mod User Manual
Model: Argus Kit 40W (VPArgusKitCF)
Brand: VOOPOO
Product Overview
The VOOPOO Argus Kit 40W Pod Mod is a compact and powerful electronic cigarette designed for both Half DL (Direct Lung) and MTL (Mouth-to-Lung) vaping. It features a built-in 1500mAh battery and an adjustable output of up to 40W, providing a customizable and long-lasting vaping experience. The device utilizes a 2ml PnP Pod Cartridge for convenient e-liquid refills and is compatible with VOOPOO's popular PnP coils.

Package Contents
Please verify that all items are present in your package:
- VOOPOO Argus Kit 40W Device (with built-in 1500mAh battery)
- PnP Pod Cartridge (2ml)
- PnP Coils (e.g., PnP-VM1 0.3Ω, PnP-TR1 1.2Ω)
- USB Type-C Charging Cable
- User Manual
Specifications
| Feature | Detail |
|---|---|
| Brand | VOOPOO |
| Model | Argus Kit 40W |
| Battery Capacity | Built-in 1500mAh |
| Output Power | 5-40W Adjustable |
| Output Voltage | 3.2-4.2V |
| Resistance Range | 0.3-3.0Ω |
| Pod Cartridge Capacity | 2ml |
| Dimensions (L x W x H) | 110 x 30 x 30 mm (approx.) |
| Weight | 200 Grams |
| Charging Port | USB Type-C |
| Safety Protections | Max Power Protection, Over Discharge Protection, Output Over-current Protection, Over Temperature Protection, Overcharge Protection, Overtime Protection, Short Circuit Protection |
Setup
- Unpack the Device: Carefully remove all components from the packaging.
- Install the Coil: If not pre-installed, push the desired PnP coil firmly into the bottom of the PnP Pod Cartridge. Ensure it is seated correctly.
- Fill the Pod: Locate the silicone stopper on the side or bottom of the PnP Pod Cartridge. Open the stopper and fill the pod with your e-liquid. Close the stopper securely.
- Prime the Coil: After filling, wait at least 5-10 minutes before first use. This allows the e-liquid to fully saturate the coil, preventing dry hits and extending coil life.
- Attach the Pod: Insert the filled pod into the device. It will be held in place magnetically.
- Charge the Device: Before first use, it is recommended to fully charge the device. Connect the USB Type-C cable to the charging port on the device and plug the other end into a suitable USB power source. The screen or indicator light will show charging status.
Operating Instructions
Power On/Off
Press the fire button (main button) five times rapidly within 2 seconds to turn the device on or off.
Adjusting Wattage
Use the '+' and '-' adjustment buttons located below the screen to increase or decrease the wattage output. The device features Smart Mode Technology, which automatically suggests an optimal wattage range based on the installed coil, helping to prevent accidental coil burnout.
Vaping
Press and hold the fire button while inhaling from the mouthpiece. Release the button when you finish inhaling.
Screen Display
The device's screen displays important information such as current wattage, battery level, coil resistance, puff count, and puff duration.
Lock/Unlock Function
Some models may feature a lock function to prevent accidental firing. Refer to the on-screen prompts or specific button combinations (e.g., pressing fire button and '+' simultaneously) to lock or unlock the device.
Maintenance
- Coil Replacement: Replace the coil when you notice a burnt taste, reduced vapor production, or diminished flavor. To replace, remove the pod from the device, pull out the old coil, and push in a new one.
- Pod Cleaning: Regularly clean the inside of the pod and the area where the pod connects to the device to prevent e-liquid buildup and ensure good conductivity. Use a dry cloth or cotton swab.
- Charging: Charge the device using the provided USB Type-C cable and a compatible power adapter. Avoid overcharging or using damaged cables.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep out of reach of children and pets.
- E-liquid Management: Do not let the pod run completely dry to avoid burning the coil. Refill the pod before the e-liquid level becomes too low.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not turning on | Low battery; Device off; Faulty device | Charge the device; Press fire button 5 times rapidly; Contact customer support if issue persists. |
| No vapor production | Coil not installed correctly; No e-liquid; Burnt coil; Device locked; Low battery | Re-install coil; Fill pod; Replace coil; Unlock device; Charge device. |
| Burnt taste | Coil not primed; E-liquid too low; Coil needs replacement; Wattage too high | Wait 5-10 mins after filling; Refill pod; Replace coil; Lower wattage. |
| Leaking pod | Coil not seated properly; Damaged coil/pod; Overfilling; Condensation | Ensure coil is firmly seated; Replace coil/pod; Do not overfill; Regularly clean condensation. |
| Device not charging | Faulty cable/adapter; Dirty charging port | Try a different cable/adapter; Clean charging port gently. |
Important Safety Information
- This product is intended for adult users only. Keep out of reach of children and pets.
- Do not use if you are pregnant, breastfeeding, or have any underlying health conditions.
- Use only original VOOPOO coils and accessories.
- Do not expose the device to water or other liquids.
- Do not disassemble or attempt to repair the device yourself.
- Dispose of the device and its components responsibly according to local regulations.
- The following warning applies when the product is used with nicotine-containing e-liquid: This product contains nicotine which is a highly addictive substance.
Warranty and Support
VOOPOO products typically come with a limited warranty covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or further assistance, please contact VOOPOO customer service or visit their official website. Contact details can usually be found on the product packaging or the official VOOPOO website.
Official VOOPOO Website: www.voopoo.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







