MAXXMEE Electric Stainless Steel Faucet with Integrated Instantaneous Water Heater

Introduction

The MAXXMEE Electric Stainless Steel Faucet with Integrated Instantaneous Water Heater provides instant hot water without the need for a large water tank or preheating. This versatile faucet is designed for various applications, including kitchens, gardens, workshops, and camping. It features a powerful heating coil, an LED temperature display, and comes with two interchangeable spouts for enhanced flexibility. This manual provides essential information for safe installation, operation, and maintenance of your new faucet.

Safety Instructions

Please read all safety instructions carefully before installation and operation to prevent injury or damage.

• Ensure the power supply matches the voltage specified on the product label (220-240V).
• Do not operate the device if the power cord or plug is damaged.
• Always disconnect the power supply before cleaning, maintenance, or if the device is not in use.
• This appliance is intended for domestic use only. Do not use it for commercial or industrial purposes.
• Do not immerse the main unit in water or other liquids.
• Ensure proper grounding.
• Keep children and pets away from the appliance during operation.
• Do not block the water outlet during operation.
• Ensure sufficient water pressure before operating the heater. Operating without water flow can damage the heating element.

Package Contents

Please check the package for the following items:

• 1 x MAXXMEE Electric Faucet Main Unit
• 1 x Standard Spout
• 1 x Flexible Spout
• Mounting Hardware (Gasket, Fixing Nut, Distance Ring, Cable Guide Ring)
• 1 x User Manual

The package includes the main faucet unit and two distinct spouts: a standard curved spout and a flexible, coiled spout.

Product Overview

Familiarize yourself with the components of your MAXXMEE Electric Faucet:

• Main Faucet Body: Contains the heating element and electronic components.
• Spout Connection: Where the chosen spout attaches.
• Temperature Control Lever: Adjusts water flow and temperature (Hot/Cold).
• LED Temperature Display: Shows the current water temperature in Celsius.
• Power Cable: For connecting to an electrical outlet.

The main unit with both spouts attached, illustrating its design and function.

Detail of the LED display indicating water temperature and the hot/cold lever for precise control.

Setup and Installation

The MAXXMEE Electric Faucet is designed for easy self-assembly. Follow these steps for proper installation:

1. Prepare the Mounting Surface: Ensure the mounting surface (e.g., countertop, sink) has a suitable hole for the faucet. The faucet features an extra-long thread for thicker worktops.
2. Insert the Faucet: Place the main faucet unit into the prepared hole.
3. Secure the Faucet: From underneath the mounting surface, slide the rubber gasket, cable guide ring, and fixing nut onto the faucet's threaded shaft. Tighten the fixing nut securely to stabilize the faucet.
4. Connect Water Supply: Connect the cold water supply line to the faucet's inlet. The faucet is compatible with standard 1/2 inch garden hose connections. Ensure all connections are tight to prevent leaks.
5. Attach Spout: Choose either the standard or flexible spout and securely attach it to the faucet's top connection point. Both spouts are 360° swiveling.
6. Connect Power: Plug the power cable into a grounded electrical outlet.

Detailed diagram showing the internal heating coil and the mounting components for easy installation.

Operating Instructions

Using your MAXXMEE Electric Faucet is straightforward:

1. Turn on Water: Move the control lever to the desired position for cold or hot water.
2. Adjust Temperature: For hot water, move the lever towards the 'Hot' side. The temperature of the water is regulated by the flow rate: a lower flow rate will result in hotter water (up to approximately 60°C), while a higher flow rate will result in cooler water.
3. Monitor Temperature: The integrated LED display will show the real-time water temperature.
4. Turn Off: Move the control lever back to the central 'Off' position to stop the water flow.

The LED display provides instant temperature feedback, and the lever controls both water flow and temperature.

Maintenance and Care

To ensure the longevity and optimal performance of your faucet, regular maintenance is recommended:

• Cleaning: Wipe the exterior of the faucet with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the stainless steel finish.
• Descaling: In areas with hard water, mineral deposits may accumulate. Periodically descale the spout and internal components if water flow decreases or heating efficiency is reduced. Use a mild descaling solution suitable for kitchen appliances, following the product's instructions.
• Winterization (for outdoor use): If used in outdoor environments where temperatures drop below freezing, ensure the faucet and water lines are completely drained to prevent damage from freezing water.

Troubleshooting

If you encounter issues with your MAXXMEE Electric Faucet, refer to the table below for common problems and solutions:

Technical Specifications

Visual representation of the faucet's dimensions and key technical specifications.

Warranty and Support

Your MAXXMEE Electric Stainless Steel Faucet is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official MAXXMEE website. For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact MAXXMEE customer service through their official channels.