Introduction
This manual provides essential information for the proper use and maintenance of your iProvèn Wrist Blood Pressure Monitor. Please read it thoroughly before first use to ensure accurate readings and safe operation. This device is designed for home use to measure systolic and diastolic blood pressure, as well as pulse rate.
Figure 1: iProvèn Wrist Blood Pressure Monitor
Setup
1. Unboxing and Contents
Upon opening the package, verify that all components are present:
- iProvèn Wrist Blood Pressure Monitor (1 unit)
- Instruction Manual (this document)
- Quick Start Guide
- AAA Batteries (2 units)
Figure 2: What's in the box
2. Battery Installation
Locate the battery compartment on the back of the monitor. Insert the two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment. The device is ready for use once batteries are installed.
Figure 3: Battery installation and key features
3. Cuff Placement
Proper cuff placement is crucial for accurate readings. Place the monitor on your left wrist with the screen facing up, on the inside of your wrist. Ensure the cuff fits snugly but not too tightly, allowing one finger to fit between the strap and your wrist. The cuff is designed to fit wrists up to 8.5 inches in circumference.
Operating Instructions
1. Preparing for Measurement
- Rest for at least 5 minutes before measuring. Avoid strenuous activity, showering, or consuming hot/cold drinks for 30 minutes prior.
- Sit comfortably with your back supported and feet flat on the floor. Do not cross your legs.
- Remove any watches, bracelets, or jewelry from your left wrist.
- Ensure the monitor is at heart level. You can rest your elbow on a table to achieve this.
- Remain still and do not talk during the measurement.
Figure 4: Important preparation steps
2. Taking a Measurement
With the cuff correctly placed and you in a relaxed position, simply press the 'Start/Stop' button. The monitor will automatically inflate and deflate, displaying your systolic pressure, diastolic pressure, and pulse rate within approximately 30 seconds. The large LCD display ensures easy readability of your results.
Figure 5: One-press measurement
3. Understanding the AHA Indicator
The monitor features a color-coded AHA (American Heart Association) indicator on the left side of the display. This indicator helps you quickly understand your blood pressure category:
- Green: Normal Blood Pressure
- Yellow: Prehypertension
- Orange: High Blood Pressure (Stage 1)
- Red: High Blood Pressure (Stage 2) / Hypertensive Crisis
Figure 6: Easy-to-read display with AHA indicator
4. Memory Storage
The monitor can store up to 60 readings. To review past measurements, press the 'Mem' button. Use the 'Mem' and 'Set' buttons to scroll through previous readings. The device will automatically shut down after a period of inactivity or you can press 'Start/Stop' to turn it off.
5. Official Product Video: How to use your Wrist Blood Pressure Monitor correctly
Video 1: This official iProvèn video demonstrates the correct procedure for using your wrist blood pressure monitor to ensure accurate readings.
Maintenance
1. Cleaning
Wipe the monitor and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water. Keep the device clean and free from dust.
2. Storage
Store the blood pressure monitor in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity. Keep it out of reach of children.
Troubleshooting
If you encounter issues with your iProvèn Blood Pressure Monitor, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Inaccurate or inconsistent readings | Improper cuff placement, movement/talking during measurement, not resting before measurement, incorrect arm position (not at heart level), full bladder. | Ensure cuff is correctly placed on left wrist, palm up. Rest for 5 minutes before measuring. Remain still and silent. Keep wrist at heart level. Empty bladder before measurement. Take measurements at the same time each day for consistent comparison. |
| Display is blank or dim | Low or depleted batteries. | Replace with new AAA batteries. |
| Cuff does not inflate or inflates incorrectly | Cuff not securely fastened. | Re-fasten the cuff securely around your wrist. |
For further assistance, please refer to the detailed instruction manual (PDF) or contact customer support.
Figure 7: Common FAQs and tips
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 3.94 x 3.15 x 3.03 inches |
| Item Weight | 3.2 ounces (0.2 Pounds) |
| Power Source | Battery Powered (2x AAA batteries included) |
| Display Type | LCD |
| Cuff Size | Fits wrists up to 8.5 inches |
| Memory Storage | Up to 60 readings |
Warranty and Support
1. Return Policy
iProvèn offers a 100-day refund or replacement policy for this product. Please refer to your purchase documentation for specific terms and conditions.
2. Customer Support
For additional support, troubleshooting, or inquiries, please visit the official iProvèn store or refer to the full User Manual (PDF).
- Official User Manual (PDF): Download PDF
- Visit the iProvèn Store: iProvèn Store on Amazon
