1. Product Overview
The DREAMIZER Black 7/8" Bar End Motorcycle Mirrors are designed to provide enhanced rear visibility for a wide range of motorcycles. Constructed from durable billet aluminum with high-quality glass, these mirrors are built to withstand various weather conditions and offer extensive adjustability for optimal viewing angles.
Image 1.1: Overview of the DREAMIZER Bar End Motorcycle Mirrors and their application on a motorcycle.
Key Features:
- Universal Fitment: Compatible with standard hollow 7/8 inch diameter handlebars found on most Street, Sport, Touring, Chopper, and Cruiser motorcycles.
- Durable Construction: Features CNC machined billet aluminum housing with a black coating and high-quality glass, ensuring longevity and resistance to various weather conditions.
- Adjustable Viewing Angle: Equipped with a 360-degree rotatable ball-type universal connecting joint, allowing for precise adjustment up, down, left, or right to achieve the best viewing angle.
- Waterproof Design: Engineered to be waterproof, maintaining clear visibility in wet conditions.
2. Setup and Installation
Before beginning installation, ensure your motorcycle's handlebars are clean and free of debris. This product is designed for handlebars with a standard 7/8 inch (22mm) outer diameter and a hollow interior for the bar end adapters.
Package Contents:
- 2 x Bar End Mirrors (Left and Right)
- 2 x Adapters (for handlebar insertion)
- 2 x Allen Wrenches (for tightening)
Image 2.1: Included components for mirror installation.
Installation Steps:
- Prepare Handlebars: If present, remove any existing bar end weights or caps from your motorcycle's handlebars. Ensure the handlebar ends are clear and clean.
- Insert Adapter: Insert the expansion adapter into the open end of your handlebar. The adapter should fit snugly.
- Attach Mirror: Align the mirror assembly with the adapter. The mirror's mounting mechanism will connect to the adapter.
- Tighten Fasteners: Use the provided Allen wrenches to tighten the screws on the mirror's mounting clamp and the expansion adapter. Tighten securely, but do not overtighten, to avoid damaging the handlebar or mirror components. Ensure the mirror is firmly seated and does not rotate freely.
- Adjust Position: Loosely adjust the mirror to your desired initial viewing angle. Final adjustments will be made during the operating phase.
- Repeat for Second Mirror: Follow the same steps for the other side of the handlebar.
Note: For some motorcycle models, minor modifications or additional spacers may be required for optimal fit. Always ensure the mirrors do not interfere with the operation of your throttle or brake levers.
Image 2.2: Examples of installed mirrors on different motorcycle types.
3. Operating Instructions
Once installed, the DREAMIZER bar end mirrors offer flexible adjustment to provide the best possible rear view while riding.
Adjusting Mirror Angle:
The mirrors feature a ball-type universal connecting joint that allows for 360-degree rotation. This enables you to fine-tune the mirror's position to eliminate blind spots and ensure clear visibility of traffic behind you.
- Gently grasp the mirror housing and pivot it to adjust the vertical (up/down) and horizontal (left/right) angle.
- The mirror can also be rotated sideway to achieve a wider or narrower field of view, depending on your preference and riding posture.
- Ensure the mirror is securely positioned after adjustment to prevent movement during operation.
Image 3.1: Illustration of the 360-degree rotation joint for flexible mirror adjustment.
It is recommended to make initial adjustments while stationary and then fine-tune them during a short, safe ride to ensure optimal rear visibility in real-world conditions.
4. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your DREAMIZER bar end mirrors.
Cleaning:
- Clean the mirror glass regularly with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive cleaners or materials that could scratch the mirror surface.
- Wipe down the aluminum housing with a damp cloth to remove dirt and grime. Dry thoroughly to prevent water spots.
Inspection:
- Periodically check all mounting screws and fasteners to ensure they are tight. Vibrations from riding can sometimes loosen components over time.
- Inspect the mirror glass for any cracks or damage. Replace the mirror if visibility is compromised.
- Check the pivot points for smooth operation and ensure they hold their position firmly.
5. Troubleshooting
This section addresses common issues you might encounter with your bar end mirrors.
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror vibrates excessively at speed. | Loose mounting screws or improper installation. | Ensure all screws are tightened securely. Re-check installation steps to confirm proper fitment of the expansion adapter within the handlebar. |
| Mirror does not hold its adjusted position. | Pivot joint is too loose. | Tighten the screw at the pivot point of the mirror. Refer to the installation diagram if necessary. |
| Mirror falls off or becomes detached. | Expansion adapter not sufficiently tightened or handlebar interior is too wide. | Ensure the expansion adapter is fully engaged and tightened. For persistent issues, consider using a thread-locking compound on the expansion screw or verifying handlebar inner diameter compatibility. |
| Poor visibility. | Mirror angle incorrect or dirty glass. | Adjust the mirror angle as described in the Operating section. Clean the mirror glass thoroughly. |
6. Specifications
Detailed technical specifications for the DREAMIZER Bar End Motorcycle Mirrors.
| Attribute | Value |
|---|---|
| Brand | DREAMIZER |
| Model Number | LFMEEUS013 |
| Color | Black |
| Mirror Dimensions | Approx. 4" x 2" (10.5cm x 5.5cm) |
| Body Material | Billet Aluminum Housing |
| Mirror Material | High-Quality Glass |
| Lens Curvature | Convex |
| Mounting Type | Handlebar Mount (7/8" / 22mm standard hollow handlebars) |
| Special Features | Waterproof, 360-degree adjustable pivot |
| Item Weight | 1.35 pounds (approx. 0.61 kg) |
| Package Dimensions | 9.02 x 4.17 x 2.48 inches (approx. 22.9 x 10.6 x 6.3 cm) |
Image 6.1: Detail of the mirror's heavy-duty aluminum construction.