Ikan Lite-Puter Junior 6-Channel DMX Lighting Console Controller User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of the Ikan Lite-Puter Junior 6-Channel Compact DMX Lighting Console Controller. This device is designed for controlling DMX512 compatible lighting fixtures, offering scene recall and channel level adjustments. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent damage.

Safety Information

Always observe the following safety precautions to reduce the risk of electric shock, fire, or injury:

• Do not expose the unit to rain or moisture.
• Do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• Ensure the power supply voltage matches the requirements specified on the unit.
• Disconnect the power supply before cleaning or when not in use for extended periods.
• Avoid placing the unit near heat sources or in direct sunlight.
• Use only accessories and attachments specified by the manufacturer.

Product Overview

The Lite-Puter Junior is a compact DMX lighting console featuring 6 channel faders, a master fader, and a control panel for scene programming and recall.

Front Panel Controls

Image: Front view of the Lite-Puter Junior DMX console. This image displays the six individual channel faders (SUB 1-6), the master fader, and the central control panel which includes a small LCD screen, scene selection buttons, function buttons, and a numeric keypad.

• SUB 1-6 Faders: Control the output level of individual DMX channels 1 through 6.
• Master Fader: Controls the overall output level of all active channels.
• Display Screen: Shows current channel levels, scene numbers, and programming information.
• Numeric Keypad (0-9): Used for entering values, scene numbers, and other data.
• SC. (Scene) Button: Activates scene mode.
• CH. (Channel) Button: Activates channel mode.
• FUNC. (Function) Button: Accesses various console functions.
• REC. (Record) Button: Used to save programmed scenes.
• Arrow Buttons (Up/Down/Left/Right): Navigation within menus and value adjustment.
• CL (Clear) Button: Clears current selections or values.
• AT (Auto) Button: Activates automatic functions or playback.
• ENTER Button: Confirms selections or entered values.

Rear Panel Connections

Image: Rear view of the Lite-Puter Junior DMX console. This image highlights the power input (DC 12V), the main power switch, DMX OUT (3-pin XLR), DMX IN (3-pin XLR), and an Ethernet-style port labeled AUDIO, along with pin configuration details.

• POWER Switch: Turns the unit on or off.
• DC 12V Input: Connects the included power adapter for external power.
• DMX OUT (3-pin XLR): Connects to the first DMX lighting fixture in your chain.
• DMX IN (3-pin XLR): Allows connection from another DMX controller for synchronization or cascading.
• AUDIO Port: (Specific functionality may vary, refer to advanced manual if applicable).

Setup

1. Unpacking

1. Carefully remove the Lite-Puter Junior console and all accessories from the packaging.
2. Verify that all components are present: Lite-Puter Junior console, power adapter.
3. Inspect the unit for any signs of damage during transit. If damage is found, contact your dealer immediately.

2. Power Connection

1. Ensure the POWER switch on the rear panel is in the OFF position.
2. Connect the included power adapter to the DC 12V input on the rear panel.
3. Plug the power adapter into a suitable electrical outlet.
4. The unit can also operate from its built-in rechargeable battery, providing approximately 3 hours of stand-by time. Ensure the unit is charged before portable use.

3. DMX Connections

1. Connect a 3-pin DMX cable from the DMX OUT port of the Lite-Puter Junior to the DMX IN port of your first DMX lighting fixture.
2. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the second, and so on.
3. Ensure all DMX fixtures are set to their correct DMX addresses and modes.
4. If using another DMX controller, connect its DMX OUT to the DMX IN port of the Lite-Puter Junior for synchronization.

Operating Instructions

1. Power On/Off

• To power on, flip the POWER switch on the rear panel to the ON position. The display will illuminate.
• To power off, flip the POWER switch to the OFF position.

2. Channel Level Adjustment

1. Press the CH. button to enter Channel Mode.
2. Adjust the SUB 1-6 Faders to set the desired DMX output level for each of the first six channels. The display will show the current channel levels.
3. Alternatively, use the numeric keypad to directly enter a value for a selected channel.
4. Adjust the Master Fader to control the overall intensity of all active channels.

3. Scene Programming

The Lite-Puter Junior supports up to 40 programmable scenes.

1. Set the desired levels for channels 1-6 using the SUB 1-6 Faders.
2. Press the REC. button. The display will prompt for a scene number.
3. Use the Numeric Keypad to enter a scene number (1-40) where you want to save the current settings.
4. Press ENTER to confirm and save the scene.

4. Scene Recall

The console features 6 hot keys for quick scene recall.

1. Press the SC. button to enter Scene Mode.
2. Use the Numeric Keypad to enter the desired scene number (1-40).
3. Press ENTER to recall the scene.
4. Alternatively, use the 6 dedicated hot keys (typically located below the display or integrated with the numeric keypad) for instant recall of pre-assigned scenes.

5. Console Synchronization

The Lite-Puter Junior can be synchronized with another console via its DMX IN port.

• Connect the DMX OUT of the primary console to the DMX IN of the Lite-Puter Junior.
• Ensure both consoles are configured for proper DMX signal reception and transmission.

Maintenance

1. Cleaning

• Disconnect the power supply before cleaning.
• Use a soft, dry cloth to wipe the exterior of the console.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.

2. Battery Care

• To prolong battery life, avoid fully discharging the battery frequently.
• If the unit will not be used for an extended period, charge the battery periodically (e.g., every 3 months) to maintain its capacity.

Troubleshooting

Specifications

Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty terms, please refer to the documentation included with your purchase or contact the retailer. For technical support, service, or parts, please contact your authorized dealer or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.