Introduction
This manual provides essential instructions for the safe and effective use of your LKPower 2-Prong AC Power Cord Cable. This cable is designed as a replacement or spare power solution for various portable movie mini projectors, including specific models from VANKYO and DR. J Professional. Please read this manual thoroughly before use and retain it for future reference.
Product Overview
The LKPower 2-Prong AC Power Cord Cable is a high-quality replacement power cable designed to supply AC power to compatible devices. It features a standard 2-prong connector for wall outlets and a compatible connector for your projector's power input. The cable is engineered with safety features to protect your devices.
Image: The LKPower 2-Prong AC Power Cord Cable. This image displays the cable with its two-prong plug on one end, designed for standard wall outlets, and the device-specific connector on the other end, ready for connection to a compatible projector.
Setup
- Verify Compatibility: Ensure your projector model is listed as compatible with this power cord. Refer to your projector's manual for its specific power input requirements.
- Inspect the Cable: Before first use, visually inspect the power cord for any signs of damage, such as cuts, frayed wires, or bent prongs. Do not use a damaged cable.
- Connect to Projector: Insert the device-specific end of the LKPower AC Power Cord Cable firmly into the power input port of your compatible projector.
- Connect to Power Outlet: Plug the 2-prong end of the power cord into a standard AC wall outlet (100-240V, 50/61Hz). Ensure the outlet is easily accessible and not overloaded.
- Power On: Once connected, you may power on your projector according to its own operating instructions.
Operating Instructions
The LKPower 2-Prong AC Power Cord Cable functions as a power supply for your compatible projector. Its operation is straightforward:
- Once properly connected to both the projector and a power outlet, the cable will deliver the necessary electrical power to operate the projector or charge its internal battery, if applicable.
- The cable is designed for worldwide AC input (100-240V, 50/61Hz), making it suitable for international travel with appropriate outlet adapters (not included).
- Always ensure a secure connection at both ends to prevent power interruptions or potential damage.
Maintenance
- Cleaning: Disconnect the power cord from the wall outlet and the projector before cleaning. Wipe the cable and connectors with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply, as this can damage the internal wires.
- Inspection: Periodically inspect the cable for any signs of wear or damage. Replace the cable immediately if any damage is observed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Projector does not power on. |
|
|
| Intermittent power to projector. |
|
|
Specifications
- Product Type: 2-Prong AC Power Cord Cable
- Input: AC 100-240V, 50/61Hz (Worldwide AC Input)
- Connector Type: Male-to-Female (2-prong wall plug to device-specific connector)
- Safety Features: Over Voltage Protection, Over Heat Protection
- UL Listed: Yes
- Brand: LKPower
- Compatible Models: VANKYO Leisure, Cinemango Q5, 100, 460, 470, 3W & DR. J Professional HI-04 Portable Movie Mini Projectors
Warranty and Support
LKPower products are manufactured with quality materials and undergo rigorous testing. This power cord is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact your retailer or the LKPower customer service department. Please have your purchase information and product details available when contacting support.
For further assistance, please visit the LKPower official website or contact your point of purchase.