Tomshine LT179EU-B

Tomshine 1.6m Wooden Floor Lamp with Shelves - User Manual

Model: LT179EU-B

1. Safety Instructions

Please read these instructions carefully before assembly and use. Keep this manual for future reference.

  • Ensure the power supply is disconnected before assembly, installation, or maintenance.
  • This product is for indoor use only.
  • Do not expose the lamp to water or high humidity.
  • Use only the specified bulb type (E27 LED, 15W max).
  • Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
  • Keep children and pets away from the lamp during operation.
  • Ensure the lamp is placed on a stable, level surface to prevent tipping.

2. Package Contents

Verify that all components are present before beginning assembly:

  • 1 x Floor Lamp with Shelves (unassembled)
  • 1 x E27 LED Bulb (15W, 3000-6500K)
  • 1 x Remote Control (2 x AAA batteries not included)
  • 1 x Installation Accessories Kit (screws, tools if applicable)
  • 1 x User Manual

3. Setup and Assembly

The Tomshine floor lamp is designed for straightforward assembly. Follow these steps:

  1. Unpack all components and lay them out on a clean, flat surface.
  2. Assemble the wooden frame by screwing the vertical posts to the shelf panels. Ensure all connections are secure.
  3. Attach the lampshade frame to the top section of the lamp.
  4. Carefully place the fabric lampshade over the frame.
  5. Screw the provided E27 LED bulb into the lamp holder. Do not overtighten.
  6. Position the lamp in your desired location, ensuring it is stable and the power cord can reach an outlet without tension.
Exploded view of Tomshine floor lamp components
Figure 3.1: Exploded view of lamp components for assembly.

4. Operating Instructions

The lamp can be operated using the pull chain switch or the included remote control.

4.1. Pull Chain Operation

  • Pull once: Turn the lamp ON.
  • Pull again: Turn the lamp OFF.
  • The pull chain can also cycle through different light colors if the bulb supports it.

4.2. Remote Control Operation

Insert 2 AAA batteries (not included) into the remote control before use.

Tomshine floor lamp with remote control and bulb details
Figure 4.1: Tomshine floor lamp with detailed view of the remote control and pull switch.
  • On/Off Button: Press to turn the lamp ON or OFF.
  • Night Light Mode: Activates a low-intensity, warm light setting.
  • Stepless Dimmable: Use the brightness buttons (+ / −) for continuous brightness adjustment. Short press for single step, long press for continuous change.
  • Stepless Color Temperature: Use the color temperature buttons (C+ / C−) to adjust the light color from warm white (3000K) to cool white (6500K). Short press for single step, long press for continuous change.
  • 30/60min Timer: Sets the lamp to automatically turn off after 30 or 60 minutes.
Illustration of adjustable color temperature and dimming for the Tomshine lamp
Figure 4.2: Visual representation of adjustable color temperature (3000K-6500K) and stepless dimming.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your lamp.

  • Cleaning: Disconnect the power before cleaning. Wipe the lamp frame and shelves with a soft, dry cloth. For the fabric lampshade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
  • Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it. Unscrew the old E27 bulb and screw in a new E27 LED bulb (max 15W).
  • Remote Control Batteries: Replace AAA batteries in the remote control when its range or responsiveness decreases.

6. Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Lamp does not turn on.No power, loose bulb, faulty bulb.Check power outlet, ensure plug is fully inserted. Tighten or replace the E27 bulb.
Remote control not working.Dead batteries, remote out of range, obstruction.Replace AAA batteries. Ensure remote is within range and pointed towards the lamp. Remove any obstructions.
Light flickers or is dim.Loose bulb, incompatible bulb, power fluctuation.Tighten the bulb. Ensure the bulb is an E27 LED 15W. Check power supply.
Lamp is unstable.Uneven surface, loose assembly.Place on a flat, stable surface. Re-tighten all assembly screws.

If the problem persists after trying these solutions, please contact customer support.

7. Specifications

FeatureDetail
Model NumberLT179EU-B
BrandTomshine
Dimensions (L x W x H)26 x 26 x 159 cm (10.24 x 10.24 x 62.6 inches)
Weight4.15 kg (9.15 lbs)
Input VoltageAC100-240V, 50/60Hz
Cable LengthApprox. 3 meters (9.8 feet)
Bulb TypeE27 LED (15W, 1200 lumens)
Color Temperature3000K-6500K (Adjustable)
DimmableYes
Control MethodPull Chain Switch, Remote Control
MaterialWood (Frame), Fabric (Lampshade)
ColorBlack (Frame), Beige (Lampshade)
Energy Efficiency ClassF
Energy efficiency label for Tomshine floor lamp
Figure 7.1: Energy efficiency label. For more details, visit eprel.ec.europa.eu/qr/1514765.
Dimensions diagram for Tomshine floor lamp
Figure 7.2: Detailed dimensions of the Tomshine floor lamp.

8. Warranty and Support

Tomshine products are manufactured to high-quality standards. For warranty information or technical support, please refer to the retailer's policy or contact Tomshine customer service directly.

  • Customer Service: Refer to your purchase documentation for contact details.
  • Online Support: Visit the official Tomshine website for FAQs and support resources.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.