Snailfly Running Boards Instruction Manual

Introduction

This instruction manual provides detailed guidance for the installation, operation, and maintenance of your Snailfly Running Boards. Designed for specific Toyota Highlander models, these running boards enhance vehicle accessibility and appearance. Please read this manual thoroughly before beginning installation.

Compatibility

These running boards are specifically designed for the following models:

• Toyota Highlander L, LE, XLE, XSE, Limited, Platinum, Bronze Edition (2020, 2021, 2022, 2023, 2024, 2025)

Figure 1: Product compatibility chart. Ensure your vehicle matches the compatible models listed.

Safety Information

Always prioritize safety during installation and use. Ensure all components are securely fastened before use. Do not exceed the maximum weight capacity of 400 lbs. Avoid standing on the running boards while the vehicle is in motion.

Components and Materials

The Snailfly Running Boards are constructed from high-quality materials for durability and strength.

• Material: Aluminum, Acrylonitrile Butadiene Styrene (ABS)
• Exterior Finish: Textured
• Weight Limit: 400 lbs (maximum)

Figure 2: Detailed view of the running board surface, highlighting its anti-slip texture and robust construction.

Figure 3: Key features including stepping width, material, and weight capacity.

Setup and Installation

Installation is designed to be a straightforward bolt-on process. Running boards and mounting brackets are packaged and shipped separately. Professional installation is recommended if you are unfamiliar with vehicle modifications.

General Installation Steps:

1. Identify the mounting points on your vehicle's chassis.
2. Attach the provided mounting brackets to the vehicle's frame using the appropriate hardware.
3. Carefully align the running boards with the attached brackets.
4. Secure the running boards to the brackets. Ensure all bolts are tightened to the manufacturer's specifications.
5. Verify the stability of the running boards by applying gentle pressure.

Note: Some installations may require minor trimming of plastic trim for a perfect fit. Refer to the detailed PDF user manual for specific vehicle-model instructions and diagrams.

Figure 4: Snailfly Running Boards installed on a Toyota Highlander.

Operating Instructions

The running boards provide a convenient step for easier entry and exit from your Toyota Highlander. They also offer additional protection for the vehicle's side panels.

• Use the 4.17-inch wide stepping surface to safely step into or out of the vehicle.
• The anti-slip rubber surface provides secure footing in various weather conditions.
• The running boards can support up to 400 lbs, accommodating multiple users simultaneously.

Figure 5: Benefits of using running boards for improved accessibility and vehicle protection.

Maintenance

To ensure the longevity and appearance of your Snailfly Running Boards, follow these maintenance guidelines:

• Regularly clean the running boards with mild soap and water to remove dirt, salt, and debris.
• Inspect all mounting hardware periodically (e.g., every 3-6 months) to ensure bolts remain tight and secure. Re-tighten if necessary.
• Check the anti-slip rubber surface for any signs of wear or damage.
• Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
• For optimal protection, consider applying a protective wax or sealant to the aluminum surfaces.

Troubleshooting

Issue: Running Board Feels Loose or Unstable

Possible Cause: Loose mounting bolts or improperly installed brackets.

Solution:

1. Carefully inspect all mounting points and hardware under the vehicle.
2. Ensure all bolts are securely tightened. Refer to the detailed PDF manual for torque specifications.
3. Verify that all required brackets are installed. In some cases, specific rear mounting brackets or holes might be overlooked during manufacturing or installation, leading to instability. If a bracket appears missing or holes are not present where expected, contact Snailfly customer support for assistance.
4. If the issue persists after re-tightening, professional inspection and re-installation are recommended.

Specifications

Warranty and Support

For any questions regarding installation, troubleshooting, or product information, please contact Snailfly customer support. While specific warranty details are not provided in this manual, Snailfly is committed to customer satisfaction.

You can visit the official Snailfly store for more information and support: Snailfly Store on Amazon

A detailed PDF user manual is also available for download: User Manual (PDF)