Introduction
Thank you for purchasing the Prominence Home Kailani 52-inch LED Ceiling Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Kailani ceiling fan features a 52-inch blade span, an integrated dimmable LED light, and a reversible motor for year-round comfort. It includes pull chains for convenient control of fan speed and light. The dual-finish blades offer versatile aesthetic options.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these basic precautions:
- Read all instructions and safety information before installing your fan and save these instructions.
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
- Before installation, disconnect power by turning off the circuit breakers at the main fuse box.
- Ensure the installation site allows the fan blades to rotate without obstruction.
- The fan must be mounted with a minimum of 7 feet (2.1 meters) clearance from the floor to the trailing edge of the blades.
- Do not operate the fan with damaged blades.
- Do not insert objects into the path of the fan blades while the fan is operating.
This product is designed to be code compliant. For more details on compliance, refer to the specifications section.
Image: Certifications indicating compliance with Intertek, DOE, and CA CEPA/CARB/CEC regulations.
Package Contents
Verify that all components listed below are included in your package:
- Motor Housing Assembly
- Fan Blades (4)
- Blade Irons
- Light Kit Assembly with Integrated LED Board
- Frosted Glass Globe
- Downrod (6-inch standard)
- Canopy
- Mounting Bracket
- Hardware Pack (screws, washers, wire nuts)
- Pull Chains (2)
- Owner's Manual
Setup and Installation
1. Mounting Options
The Kailani fan supports dual mounting options: standard downrod mount and angled ceiling mount. An angle bracket for ceilings greater than 17 degrees is sold separately.
Image: Diagram illustrating standard and angled mounting options for the ceiling fan.
2. Blade Installation
The fan includes reversible blades with a white finish on one side and a white maple finish on the other. Choose the desired finish before attaching the blades to the blade irons, then secure the blade irons to the motor housing.
Image: Two views of the fan, one with white blades (Side A) and one with white maple blades (Side B), demonstrating the reversible blade feature.
3. Light Kit Assembly
The fan features an integrated LED light kit with a frosted globe. Connect the light kit wiring according to the instructions provided in the hardware pack and secure the globe.
Image: Close-up of the fan's light kit, highlighting the frosted integrated globe, 4-inch LED board, 3000K color temperature, and dimmable lighting feature (20% to 100%).
4. Room Size and Placement
For optimal performance, ensure the fan size is appropriate for your room dimensions. This 52-inch fan is suitable for large rooms.
Image: A guide showing recommended fan sizes for small (less than 8ft x 10ft, up to 32-in), medium (up to 12ft x 14ft, 32-in to 48-in), and large rooms (up to 12ft x 18ft, 48-in to 58-in). This 52-inch fan is highlighted for large rooms.
Installation Video
Video: An overview of the Prominence Home 52" Kailani Ceiling Fan in Bright White, demonstrating its features and appearance. This video can assist with understanding the product during installation.
Operating Instructions
1. Fan Speed Control
Use the pull chain designated for fan speed to cycle through the available speed settings (High, Medium, Low, Off).
2. Light Control
Use the pull chain designated for the light to turn the integrated LED light On or Off. The LED light is dimmable; refer to the separate remote control instructions if using a compatible universal remote (sold separately).
3. Reversible Motor Function
The fan features a reversible motor for seasonal use. A slide switch on the motor housing controls the direction of blade rotation.
- Summer Mode: Set the switch to circulate air downwards, creating a cooling effect.
- Winter Mode: Set the switch to circulate air upwards, helping to distribute warm air evenly throughout the room.
Image: Illustration showing the reversible motor function. In winter, warm air is circulated upwards. In summer, cool air is pushed downwards.
Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Periodically clean the fan blades and motor housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Blade Balance: Check blade screws for tightness annually. Loose blades can cause wobbling and noise.
- Light Kit: The integrated LED light board is designed for long life and typically does not require replacement.
Troubleshooting
If you experience issues with your fan, consult the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Motor switch in wrong position. | Check circuit breaker; Verify all wire connections are secure; Ensure motor reverse switch is fully engaged. |
| Fan wobbles | Loose blade screws; Unbalanced blades; Loose mounting bracket. | Tighten all blade screws; Use a balancing kit (not included) if necessary; Ensure mounting bracket is securely fastened to the ceiling. |
| Light does not work | Loose wire connection in light kit; Faulty LED board. | Check light kit wiring connections; Contact customer support if LED board is suspected to be faulty. |
| Noisy operation | Loose screws; Motor hum; Blades hitting an obstruction. | Check and tighten all screws; Ensure no parts are rubbing; Verify blades are clear of obstructions. |
Specifications
Key technical specifications for the Prominence Home Kailani Ceiling Fan (Model 51636-01):
Image: Diagram showing the product dimensions: 52-inch blade span and 13.3 inches from ceiling to the bottom of the light kit.
| Feature | Detail |
|---|---|
| Model Name | Kailani |
| Model Number | 51636-01 |
| Brand | Prominence Home |
| Color | White |
| Product Dimensions | 52"D x 52"W x 18.85"H |
| Blade Span | 52 inches |
| Number of Blades | 4 |
| Blade Material | Engineered Wood |
| Light Type | Integrated LED |
| LED Wattage | 18.5 watts |
| LED Lumens | 1400 lumens |
| Color Temperature | 3000K |
| Wattage (Fan) | 21.5 watts |
| Voltage | 120 Volts |
| Control Method | Pull Chain (Remote compatible, sold separately) |
| Indoor/Outdoor Usage | Indoor |
| Mounting Type | Ceiling Mount (Standard downrod, Angled compatible) |
Warranty
The Prominence Home Kailani Ceiling Fan is backed by a Limited Lifetime Warranty. Please refer to the warranty documentation included with your product for specific terms and conditions, or visit the Prominence Home website for more details.
Customer Support
For technical assistance, missing parts, or warranty inquiries, please contact Prominence Home customer support:
- Website: Visit the Prominence Home Store on Amazon
- Phone: Refer to the contact information provided in your product packaging.
- Email: Refer to the contact information provided in your product packaging.
Please have your model number (51636-01) and proof of purchase ready when contacting support.
