MOES B08NC6VTWY

Download PDF
Contents

MOES 4-Gang Smart WiFi Wall Touch Switch User Manual

Model: B08NC6VTWY

Brand: MOES

1. Safety Information

  • Neutral Wire Required: This smart switch requires a neutral wire for proper operation. Please confirm your house wiring has a neutral wire before purchase and installation.
  • 2.4 GHz WiFi Network: The device only supports 2.4 GHz Wi-Fi networks (not 5 GHz). Ensure your phone is connected to a 2.4 GHz network during setup.
  • Professional Installation Recommended: For safety and proper functionality, it is highly recommended that installation be performed by a qualified electrician.
  • Power Off Before Wiring: Always turn off the circuit breaker before performing any wiring or installation procedures to prevent electrical shock.
  • Avoid Damp Environments: Do not install this device in damp environments.
  • Do Not Exceed Maximum Load: Ensure the connected load does not exceed the maximum rating of 10A/2200W per gang.

2. Product Overview

The MOES 4-Gang Smart WiFi Wall Touch Switch offers advanced control over your lighting. With its sleek glass panel and touch-sensitive buttons, it integrates seamlessly into modern home decor. This switch supports multiple control methods including touch, smartphone app, voice commands via Alexa and Google Home, and RF433 remote control. It also features multi-control association for 3-way circuit functionality and customizable scheduling.

MOES 4-Gang Smart WiFi Wall Touch Switch and packaging

Image: MOES 4-Gang Smart WiFi Wall Touch Switch and its retail packaging, highlighting its smart features.

3. Specifications

FeatureSpecification
BrandMOES
Model NumberB08NC6VTWY
Operation ModeOff, Smart Switch
Current Rating10 Amps
Operating Voltage250 Volts
Contact TypeNormally Open
Connector TypeWireless
TerminalScrew, Quick-connect
Circuit Type3-way
Actuator TypeTouch
Contact MaterialGlass
Network Compatibility2.4 GHz WiFi only

4. Installation Guide

4.1 Pre-installation Checklist

  • Confirm a neutral wire is present in your switch box.
  • Ensure your Wi-Fi network is 2.4 GHz.
  • Gather necessary tools: wire stripper, electric pen (voltage tester), electrical tape, wiring terminals.
  • Turn off power at the circuit breaker before starting.

4.2 Wiring Instructions

Follow the wiring diagram carefully. This switch requires both Live (L) and Neutral (N) wires for power, and separate Live (L1, L2, L3, L4) wires for each lamp/load.

Wiring diagram for MOES Smart Switch showing Live, Neutral, and Lamp wires

Image: Detailed wiring diagram for the MOES Smart Switch, illustrating connections for Live, Neutral, and multiple lamp wires.

Important notes for MOES Smart Switch installation, including 2.4GHz WiFi, neutral wire, and non-dimmer functionality

Image: Important notes for installation, emphasizing 2.4GHz WiFi, neutral wire requirement, and that it is not a dimmer switch.

4.3 Installation Video

Video: This video demonstrates the physical installation process of the MOES touch switch, including wiring and mounting.

5. Setup and Pairing

5.1 Smart Life/Tuya App Setup

  1. Download the Smart Life or Tuya Smart app from your smartphone's app store.
  2. Register or log in to your account.
  3. Ensure your phone is connected to a 2.4 GHz Wi-Fi network and Bluetooth is enabled.
  4. Power on the smart switch. The blue indicator light on the switch should flash rapidly (if not, press and hold any button for 6-8 seconds until it flashes).
  5. In the app, tap '+' to add a device. The app should automatically discover the switch. If not, select 'Add Manually' and choose 'Wi-Fi Switch'.
  6. Enter your 2.4 GHz Wi-Fi network password and confirm.
  7. Wait for the device to connect. Once connected, you can rename the switch and assign it to a room.

5.2 RF433 Remote Control Pairing

To pair with an RF433 remote control (not included, requires encoding 1527):

  1. Ensure the smart switch is powered off before operations.
  2. Press the desired button on the smart switch for about 8 seconds until you hear a 'Di-Di' sound (2 times).
  3. Then, press the corresponding button on your RF433 remote control. The matching of the RF code is successful when the light responds.

5.3 Multi-Control Association (3-Way Functionality)

Achieve 3-way control (two switches controlling one light) by associating this switch with another Wi-Fi smart switch via the app. Note: The associated switch must be wired with Neutral (N) and Live (L) wires.

  1. Add both smart switches to the Smart Life/Tuya App.
  2. In the app, select the main switch you want to configure.
  3. Go to the device settings (usually by tapping the pencil icon in the upper right corner).
  4. Select 'Multi-Control Association'.
  5. Tap '+' to add an associated device and select the second smart switch.
  6. Choose the specific button on the second switch that you want to control the same light.
  7. You can now control your light with both switches. Do not associate another button in the same switch for multi-control.
Diagram showing multi-control association setup in the Smart Life app for two switches controlling one light.

Image: Visual guide for setting up multi-control association within the Smart Life app, enabling multiple switches to control a single light.

Video: This video illustrates the wiring methods, RF link method, WiFi link method, and multi-control association for the smart switch.

6. Operating Instructions

6.1 Touch Control

Simply touch the capacitive buttons on the glass panel to turn the connected lights on or off. Each button corresponds to a specific gang.

6.2 App Control

Use the Smart Life/Tuya App to control your lights from anywhere. You can turn individual gangs on/off, set schedules, and manage other smart features.

6.3 Voice Control (Alexa & Google Home)

Integrate your smart switch with Amazon Alexa or Google Home for hands-free voice control. Once linked, you can use commands like "Alexa, turn on [Switch Name]" or "Hey Google, turn off [Switch Name]".

6.4 RF433 Remote Control

After successful pairing, use your RF433 remote control to switch lights on/off without needing Wi-Fi or the app.

7. Advanced Features

7.1 Customize Schedule and Timer

Set timers, schedules, and countdowns (e.g., 1/5/30 minutes, 1 hour) via the Smart Life/Tuya App to automate your lighting. This allows you to turn lights on/off at specific times or after a set duration.

7.2 Relay Status Memory

The switch can be configured to remember its last ON/OFF status after a power outage. This setting can be adjusted in the Smart Life/Tuya App under device settings.

7.3 Backlight ON/OFF Control

The blue backlight indicators on the touch panel can be turned ON or OFF via the app settings. This is useful for bedrooms where light might interfere with sleep.

Screenshot of Smart Life app showing backlight switch setting and a person sleeping with the backlight off.

Image: App interface demonstrating how to toggle the backlight of the smart switch, with an illustration of its benefit in a bedroom setting.

7.4 Device Sharing and Group Control

Share control of your smart switch with family members through the app. You can also create groups to control multiple switches or lights simultaneously.

7.5 Smart Automation

Utilize the Smart Life/Tuya App's automation features to link your switch with other smart devices. For example, you can set up routines based on weather, location, or the status of other devices.

7.6 Functions and Features Video

Video: This video highlights various functions and features of the MOES Smart Switch, including touch control, app control, voice control, timers, and multi-control association.

8. Maintenance

  • Cleaning: Wipe the glass panel with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the surface.
  • Firmware Updates: Regularly check the Smart Life/Tuya App for available firmware updates to ensure optimal performance and security.

9. Troubleshooting

  • Switch Not Responding: Ensure the circuit breaker is ON and the switch is receiving power. Check wiring connections.
  • Cannot Connect to Wi-Fi:
    • Confirm your Wi-Fi network is 2.4 GHz.
    • Ensure your phone is connected to the same 2.4 GHz Wi-Fi network.
    • Keep the smart device close to the router for a strong connection.
    • Try using the 'Add Manually' option in the Smart Life/Tuya App and select 'Wi-Fi Switch'.
    • If the indicator light is not flashing rapidly, press and hold any button on the switch for 6-8 seconds to enter pairing mode.
  • Voice Control Issues: Ensure the Smart Life/Tuya App is correctly linked to your Alexa or Google Home account. Check device names for clarity and avoid special characters.
  • Multi-Control Association Not Working: Verify that both switches are added to the app and correctly associated as per the instructions in Section 5.3. Ensure the associated switch is also wired with N and L.
  • Backlight Not Changing: Check the backlight setting in the Smart Life/Tuya App.

10. Warranty and Support

MOES products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official MOES website. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.