Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Patriot Lighting Anchors Antique Red 1-Light Vanity Light, model WL25501RC. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with electrical wiring.
- Use only the recommended bulb type and wattage specified for this fixture.
- Do not install this fixture in wet locations unless specifically rated for such use.
- Handle glass components with care to prevent breakage.
- Ensure all mounting hardware is securely fastened before operating the light.
Package Contents
Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- Vanity Light Fixture (1)
- Mounting Hardware Kit (includes screws, wire nuts, etc.)
- Installation Instructions Manual (this document)
Note: One medium base bulb is required and is not included with this package.
Specifications
| Model Number: | WL25501RC |
| Brand: | Patriot Lighting |
| Dimensions (L x W x H): | 10.5" x 9" x 11" |
| Material: | Copper, Glass |
| Style: | Antique |
| Finish Type: | Copper Finish |
| Shade Color: | Red |
| Number of Light Sources: | 1 |
| Bulb Type: | Medium Base (E26) - Not Included |
| Power Source: | Corded Electric |
| Mounting Type: | Wall Mount |
| Item Weight: | 4.99 pounds |
Figure 1: Product Dimensions. This image illustrates the key measurements of the vanity light fixture.
Setup and Installation
Before you begin: Ensure power is disconnected at the circuit breaker. It is recommended to have a second person assist with installation.
- Prepare the Area: Turn off the main power supply to the junction box where the fixture will be installed. Use a voltage tester to confirm the power is off.
- Mount the Crossbar: Attach the mounting crossbar (included in hardware kit) to the junction box using the provided screws. Ensure it is securely fastened.
- Make Electrical Connections:
- Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green). Secure with a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box. Secure with a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the junction box. Secure with a wire nut.
Ensure all wire connections are tight and no bare wire is exposed.
- Secure the Fixture: Carefully tuck all wires into the junction box. Align the fixture base with the mounting screws on the crossbar and secure the fixture in place using the decorative nuts or screws provided.
- Install the Bulb: Screw one medium base (E26) bulb (not included) into the socket. Do not exceed the maximum wattage indicated on the fixture.
- Install the Glass Shade: Carefully attach the glass shade to the fixture according to the specific design. Ensure it is secure.
- Restore Power: Turn the main power supply back on at the circuit breaker. Test the light fixture.
Figure 2: Vanity Light Fixture Detail. This image shows the design and finish of the light.
Figure 3: Installed Vanity Lights. This image provides an example of the fixture installed in a bathroom setting.
Operating Instructions
Once properly installed and powered, the Patriot Lighting Anchors Antique Red 1-Light Vanity Light operates via your standard wall switch. Simply toggle the wall switch to turn the light on or off.
Maintenance
- Cleaning: Always disconnect power before cleaning. To clean the fixture, wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.
- Bulb Replacement: Disconnect power before replacing the bulb. Allow the bulb to cool completely before touching. Unscrew the old bulb and replace it with a new medium base (E26) bulb of the correct wattage.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
Warranty and Support
This Patriot Lighting product is covered by a 5-year manufacturer warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or replacement parts, please contact Patriot Lighting customer service. Keep your proof of purchase for warranty validation.
For more information or to explore other Patriot Lighting products, visit the official Patriot Lighting Store on Amazon.
