1. Product Overview
The LEDENET SMD5050 White LED Strip Lights are designed for various lighting applications, offering bright, dimmable, and waterproof illumination. This product features double-row SMD 5050 LEDs, providing a 6500K cool white light. Its flexible design and IP67 waterproof rating make it suitable for both indoor and outdoor use, including automotive and accent lighting.
Key Features:
- LED Type: SMD 5050
- Color Temperature: 6500K (Cool White)
- Input Voltage: DC 12V
- Waterproof Rating: IP67 (Dustproof and resistant to temporary water splashes)
- Dimmable: Yes (requires external controller, not included)
- Cuttable: Every 6 LEDs
- Adhesive: Strong 3M backing
Image 1.1: Overview of LED strip features including length, IP rating, color temperature, and voltage.
2. What's in the Box
Upon unpacking, please ensure all components are present:
- 1 x 16.4ft (5 meters) LED Strip Lights
- 6 x Fixed Clips
Note: A power supply (DC 12V transformer) and an LED controller are not included and must be purchased separately.
3. Setup and Installation
Follow these steps for proper installation of your LED strip lights.
3.1 Preparation
- Ensure the installation surface is clean, dry, and smooth.
- Unroll the LED strip completely before testing or prolonged use to prevent overheating.
- Gather necessary tools: scissors, DC 12V power supply, and an optional LED controller for dimming.
3.2 Cutting the LED Strip
The LED strip can be cut to your desired length at designated cutting marks, typically every 6 LEDs. Use sharp scissors for a clean cut.
Image 3.1: Details on cutting marks and strip dimensions.
3.3 Applying the LED Strip
- Carefully peel off the red protective backing from the 3M adhesive. Ensure the adhesive remains on the strip.
- Press the LED strip firmly onto the prepared surface.
- For enhanced stability, use the provided fixed clips at regular intervals, especially on uneven surfaces or for long runs.
Image 3.2: Visual guide for cutting and adhesive application.
3.4 Wiring Connections
Connect the LED strip to a compatible DC 12V power supply. The strip has two wires for connection:
- Red Wire: Connect to the positive (+) terminal of the 12V DC power supply.
- Black Wire: Connect to the negative (-) terminal of the 12V DC power supply.
Recommendation: For a more stable and reliable connection, especially in outdoor or high-vibration environments, soldering the wires is recommended over using connectors.
Image 3.3: Wiring diagram for the LED strip.
Image 3.4: Example of a complete setup with external power supply and controller.
4. Operating Instructions
Once properly installed and connected to a DC 12V power supply, the LED strip lights will illuminate. To control the brightness (dimming function), an external LED controller is required.
- Power On/Off: Controlled by the power supply switch or an inline switch/controller (if installed).
- Dimming: If an LED controller is connected between the power supply and the LED strip, use the controller's interface (e.g., remote control) to adjust brightness from 0-100%.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your LED strip lights.
- Cleaning: Gently wipe the silicone surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Heat Dissipation: Always ensure the LED strip is unrolled and has adequate airflow, especially during testing or extended operation, to prevent heat buildup.
- Water Exposure: While IP67 rated for temporary water splashes and dust, these lights are not designed for continuous submersion or underwater use. Avoid direct high-pressure water jets.
- Connection Integrity: Periodically check all electrical connections for corrosion or looseness, especially in outdoor installations.
6. Troubleshooting
If you encounter issues with your LED strip lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power, incorrect wiring, faulty power supply. | Check if the power supply is plugged in and receiving power. Verify wiring connections (Red to +, Black to -). Test the power supply with another device if possible. |
| Lights are dim or flickering. | Insufficient power, loose connection, faulty controller. | Ensure the power supply provides adequate wattage for the strip length. Check all connections for tightness. If using a controller, bypass it temporarily to see if the issue persists. |
| Only a section of the strip is lit. | Damage to the strip, incorrect cut, faulty segment. | Inspect the unlit section for visible damage. Ensure cuts were made precisely at the designated marks. If a segment is faulty, the strip may need replacement or repair of that section. |
| Adhesive is not holding. | Surface not clean/dry, improper application, unsuitable surface material. | Clean and dry the surface thoroughly before application. Apply firm, even pressure. Use the included fixed clips for additional support, especially on textured or outdoor surfaces. |
7. Specifications
Detailed technical specifications for the LEDENET SMD5050 White LED Strip Lights:
- LED Type: SMD 5050
- Length: 16.4ft (5 meters)
- Strip Width: 14mm
- Total Width: 16.5mm
- Input Voltage: DC 12V
- Output Power: 19.2W/M, 96W/reel
- LED Density: 120 LEDs/M, 600 LEDs/Reel
- Color: White (6500K)
- Cutting Mark: Every 6 LEDs
- IP Rating: Waterproof IP67
- Luminous Flux: 9900 Lumens
- Material: Silicone Rubber
- Item Weight: 12.3 ounces (0.77 Pounds)
- Manufacturer Part Number: LEDENET-STRIP-1109
8. Warranty Information
LEDENET products are manufactured to high-quality standards. This product comes with a manufacturer's warranty against defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims. Specific warranty duration and terms may vary; refer to the product packaging or contact customer support for details.
9. Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact LEDENET customer support through the retailer where the product was purchased or visit the official LEDENET website for contact information.
Thank you for choosing LEDENET products.