IWONDER Cloud Wheel Discovery 105/120mm Skateboard Wheels and Pulley Conversion Kit User Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your IWONDER Cloud Wheel Discovery 105/120mm Skateboard Wheels and Pulley Conversion Kit. These wheels are designed to enhance your electric skateboard riding experience by offering improved speed and vibration damping. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Product Features

• Patented Damping Foam Core Technology: The Cloud Wheel incorporates a damping foam core designed to filter out vibrations, providing a smoother ride compared to standard wheels.
• Enhanced Wheel Core: Cloudwheel Discovery features thicker spokes in its wheel core, differing from original ABEC wheel cores. It is constructed from a high-strength composite material for improved impact resistance.
• Curved Wheel and Unique Tread: The curved tread design increases the wheel's grip and anti-skid capabilities during high-speed maneuvers.
• Durable Pulley System: The included pulleys are injection-molded for high strength and durability, ensuring reliable power transmission.

3. Safety Information

Always prioritize safety when riding an electric skateboard. Ensure all components are correctly installed and securely fastened before each use. Wear appropriate safety gear, including a helmet, knee pads, and elbow pads. Ride within your skill level and be aware of your surroundings. Avoid riding in wet conditions or on uneven surfaces that could compromise traction.

4. Package Contents

Verify that all items listed below are present in your package. If any components are missing or damaged, please contact customer support.

• IWONDER Cloud Wheels (4 units)
• Pulleys (2 units)
• Drive Belts (2 units)
• Mounting Plates (4 units)
• Screws and Washers (set)
• Bearings and Spacers (set)

Image: All components included in the IWONDER Cloud Wheel Discovery Skateboard Wheels and Pulley Conversion Kit.

5. Setup and Installation

This section outlines the general steps for installing the Cloud Wheel Discovery kit. Specific installation procedures may vary slightly depending on your skateboard model. Refer to the provided videos for detailed visual guidance.

5.1 General Installation Steps

1. Remove Existing Wheels: Carefully remove the existing wheels and pulleys from your skateboard's trucks. Keep track of all original hardware.
2. Install Bearings and Spacers: Insert the provided bearings and spacers into the new Cloud Wheels. Ensure they are seated correctly.
3. Attach Pulleys: Secure the new pulleys to the Cloud Wheels using the appropriate hardware.
4. Mount Wheels to Trucks: Slide the assembled Cloud Wheels onto the skateboard axles.
5. Install Drive Belts: Place the drive belts around the motor pulley and the wheel pulley. Adjust tension as needed.
6. Secure Mounting Plates: Attach any necessary mounting plates and tighten all screws securely.
7. Final Check: Spin each wheel by hand to ensure smooth rotation and proper belt alignment. Verify all nuts and bolts are tightened to prevent loosening during operation.

5.2 Installation Videos

Watch these official installation videos for step-by-step instructions specific to certain board models.

Image: A single IWONDER Cloud Wheel Discovery 105mm wheel, showcasing its design.

6. Operating Instructions

After successful installation, perform a test ride in a safe, open area to familiarize yourself with the new wheels. The Cloud Wheels are designed for a smoother and potentially faster ride due to their damping core and unique tread. Be mindful of the increased grip and different feel, especially when cornering or braking. Always maintain control and adjust your riding style as needed.

7. Maintenance

Regular maintenance ensures the longevity and performance of your Cloud Wheels.

• Clean Wheels: Periodically clean the wheels to remove dirt, debris, and small stones that can get lodged in the tread. Use a damp cloth and mild soap if necessary.
• Inspect for Wear: Regularly check the wheels for signs of wear, cracks, or damage. Replace wheels if significant wear or damage is observed.
• Bearing Care: Inspect bearings for smooth operation. If bearings become noisy or stiff, they may need cleaning, lubrication, or replacement. Avoid exposing bearings to excessive moisture.
• Belt and Pulley Check: Examine drive belts for fraying or damage. Ensure pulleys are free of debris and securely attached.
• Hardware Tightness: Before each ride, check that all nuts and bolts securing the wheels and pulleys are tight. Loose hardware can lead to accidents.

Image: Close-up view of the unique tread pattern and transparent foam core of an IWONDER Cloud Wheel Discovery.

8. Troubleshooting

• Noisy Wheels: This often indicates dirty or worn bearings. Clean or replace bearings as needed. Ensure spacers are correctly installed.
• Vibration or Wobble: Check that wheels are properly seated on the axles and all hardware is tightened. Inspect wheels for any deformities or damage.
• Belt Slippage or Breakage: Ensure belts are correctly tensioned and free from damage. Verify that the pulleys are compatible with the belt type and securely mounted.
• Reduced Performance: Check for excessive wheel wear, bearing issues, or motor problems (if applicable to your board).

9. Specifications

10. Warranty Information

IWONDER products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official IWONDER website. Keep your proof of purchase for any warranty claims.

11. Support

If you encounter any issues or have questions regarding your IWONDER Cloud Wheel Discovery kit, please contact IWONDER customer support. You can typically find contact information on the product packaging or the official IWONDER website.