Introduction
This manual provides essential information for the installation, operation, and maintenance of your SENSEA NEO Soft Close Oval Duroplast Toilet Seat. Designed for durability and hygiene, this toilet seat features a soft-close mechanism and is made from high-quality Duroplast material. Please read these instructions carefully before installation and use to ensure proper function and longevity of your product.
Product Features
- Durable and Quality Material: This toilet seat is crafted from robust Duroplast and features an antibacterial coating for enhanced hygiene. Its adjustable metal hinges ensure compatibility with all standard toilets.
- Soft Close & Slow Descend: Equipped with a soft-close lid and anti-slam protection, the seat closes slowly and quietly, preventing accidental slamming and ensuring safety.
- Easy Installation and Cleaning: The lid is designed for easy top-down mounting with included fastening screws. Stainless steel hinges prevent corrosion and facilitate simple cleaning.
- SENSEA Quality: As a product from SENSEA, a bathroom expert brand, it offers practical and aesthetic design for your bathroom and sanitary needs.
Setup and Installation
The SENSEA NEO toilet seat is designed for straightforward top-fix installation. Ensure you have all components before beginning.
Image: All components included for installation, showing the seat, two hinge assemblies, and mounting screws.
Installation Steps:
- Identify the mounting holes on your toilet bowl.
- Insert the mounting screws through the hinge bases and into the toilet bowl holes from the top.
- Secure the screws from underneath (if applicable) or tighten the top-fix mechanism until the hinges are firmly in place.
- Align the toilet seat with the hinge posts and press down firmly until it clicks into place.
- Test the stability of the installed seat.
Image: Diagram illustrating the "TOP FIX" installation method, "EASY" removal for cleaning, "EASY CLEAN" antibacterial surface, and "LONG LIFE" durability (30,000 cycles).
Operation
The SENSEA NEO toilet seat features a soft-close mechanism for quiet and safe operation.
- To close the seat or lid, simply push it gently downwards. The soft-close mechanism will engage, allowing it to descend slowly and silently without slamming.
- Avoid forcing the seat or lid down, as this can damage the soft-close mechanism.
Image: A hand demonstrating the quick-release button on the hinge, allowing for easy removal of the seat for cleaning.
Maintenance and Cleaning
Regular cleaning will help maintain the hygiene and appearance of your toilet seat. The easy-clean design and stainless steel hinges simplify this process.
- For daily cleaning, use a soft cloth with mild soap and water.
- Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the Duroplast surface and antibacterial coating.
- To thoroughly clean the toilet bowl and seat, you can easily detach the seat from its hinges using the quick-release mechanism (as shown in the operation section image).
- Ensure the seat and hinges are dry after cleaning to prevent water spots and maintain hygiene.
Troubleshooting
If you encounter any issues with your SENSEA NEO toilet seat, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Seat is loose or wobbly. | Mounting screws are not tightened sufficiently. | Re-tighten the mounting screws. Ensure the top-fix mechanism is fully engaged. |
| Soft-close mechanism not working properly. | Mechanism is damaged or obstructed. | Do not force the lid down. Check for any obstructions around the hinges. If damaged, contact customer support. |
| Seat does not fit toilet bowl correctly. | Incorrect measurements or non-standard toilet. | Verify your toilet dimensions against the product specifications. This seat is designed for standard oval toilets. |
Specifications
Detailed specifications for the SENSEA NEO Toilet Seat:
| Attribute | Detail |
|---|---|
| Brand | SENSEA (ADEO) |
| Model Name | NEO |
| Part Number | 3276000701187 |
| Material | Duroplast |
| Color | White |
| Shape | Oval (also described as Rectangular in some specs, but primary is Oval) |
| Product Dimensions (L x W x H) | 42.8 cm x 36.8 cm x 5.1 cm |
| Inner Length | 28 cm |
| Inner Width | 22 cm |
| Item Weight | 2.1 kg |
| Maximum Supported Weight | 200 kg |
| Distance between connection elements (universal) | 15.5 cm |
| Center-to-center distance | 14-18 cm |
| Plastic Pads | 4 |
| First Available Date | January 5, 2021 |
Image: Technical drawing showing the dimensions of the toilet seat: 428mm length, 368mm width, 280mm inner length, 220mm inner width, and adjustable hinge distance of 140-180mm.
Warranty and Support
The SENSEA NEO Toilet Seat comes with a 10-year guarantee, reflecting our commitment to quality and durability. This warranty covers manufacturing defects under normal use.
For any questions, technical assistance, or warranty claims, please contact your retailer or visit the official ADEO/SENSEA website for customer support information. Ensure you have your product model and part number ready when contacting support.
Image: Logos and branding associated with ADEO and SENSEA, indicating the manufacturer and brand.
