Introduction
This manual provides detailed instructions for the assembly, use, and maintenance of your Baxton Studio Jeanette Full Size Platform Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
The Jeanette platform bed features a modern and contemporary design with a black finished metal frame and a distinctive geometric headboard. It is designed to support a full-size mattress without the need for a box spring.
Image: The fully assembled Baxton Studio Jeanette Full Size Platform Bed, showcasing its black metal frame, geometric headboard, and a mattress with pillows.
Image: A detailed view of the Baxton Studio Jeanette bed's geometric headboard, highlighting its modern design.
Safety Information
- Read all instructions before assembly.
- Keep all hardware out of reach of children.
- Assemble the bed on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not use power tools for assembly as this may overtighten and damage the frame.
- Do not stand or jump on the bed.
- Use only the recommended mattress size (Full Size).
Parts List
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Headboard (1)
- Side Rails (2)
- Footboard (1)
- Center Support Beam (1)
- Support Legs (various, for frame and center beam)
- Wooden Slats (multiple)
- Hardware Pack (bolts, washers, nuts, Allen wrench)
Image: The bed frame without a mattress, clearly showing the metal structure, support legs, and the wooden slats designed to support the mattress.
Setup and Assembly
Follow these steps carefully to assemble your platform bed. It is recommended that two adults assemble this product.
- Step 1: Unpack Components
Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent damage. Identify all parts against the parts list. - Step 2: Attach Side Rails to Headboard
Connect the two side rails to the headboard using the provided bolts and washers. Do not fully tighten bolts at this stage. - Step 3: Attach Side Rails to Footboard
Connect the other ends of the side rails to the footboard using the provided bolts and washers. Ensure the frame is aligned. Do not fully tighten bolts. - Step 4: Install Center Support Beam
Attach the center support beam to the designated points on the headboard and footboard, or to the crossbars if applicable. Secure with bolts. Attach any support legs to the center beam. - Step 5: Tighten All Bolts
Once the main frame is assembled and aligned, carefully tighten all bolts using the Allen wrench. Ensure all connections are secure. - Step 6: Place Wooden Slats
Position the wooden slats across the bed frame. Ensure they are evenly spaced and securely fitted into their designated holders or attached to the frame as per design. - Step 7: Final Check
Verify that the bed frame is stable and all components are correctly assembled and tightened.
Usage Instructions
The Baxton Studio Jeanette Platform Bed is designed for use with a full-size mattress. No box spring is required due to the integrated wooden slat support system.
- Place your full-size mattress directly onto the wooden slats.
- Ensure the mattress is centered and evenly distributed on the frame.
- Avoid placing excessive weight on any single point of the bed frame or slats.
Maintenance
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
- Hardware Check: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
- Slat Inspection: Inspect the wooden slats for any signs of damage or wear. Replace any broken slats immediately to ensure proper mattress support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose bolts or incorrect assembly. | Ensure all bolts are fully tightened. Review assembly steps to confirm correct installation of all components. |
| Squeaking noises. | Loose connections or friction between metal parts/slats. | Tighten all bolts. If squeaking persists, apply a small amount of silicone lubricant to connection points or where slats meet the frame. |
| Mattress sags in the middle. | Damaged or improperly placed wooden slats; insufficient center support. | Check all wooden slats for damage and ensure they are correctly positioned and evenly spaced. Verify the center support beam and its legs are securely installed. |
Specifications
| Brand: | Baxton Studio |
| Model: | 176-21003-10991-CYMX |
| Size: | Full |
| Product Dimensions: | 77.2"L x 56"W x 47.9"H |
| Material: | Metal, Poplar Wood (slats) |
| Finish: | Black |
| Assembly Required: | Yes |
| Item Weight: | 46.7 pounds |
| UPC: | 193271154029 |
Image: Technical drawing showing the dimensions of the Baxton Studio Jeanette Full Size Platform Bed, including length (77.20"), width (54.00"), and headboard height (47.90").
Warranty and Support
For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Baxton Studio website. If you have any questions, require replacement parts, or need assistance with assembly, please contact Baxton Studio customer support.
Customer Support: Refer to your purchase receipt or the Baxton Studio website for contact details.
