Hanwha SBP-122HMW Security Camera Mount and Housing User Manual

1. Introduction

This user manual provides detailed instructions for the installation, operation, and maintenance of the Hanwha SBP-122HMW Security Camera Mount and Housing. Please read this manual thoroughly before using the product to ensure proper setup and to prevent damage or injury. Keep this manual for future reference.

2. Product Overview

The Hanwha SBP-122HMW is a robust mount and housing designed to securely install and protect compatible security cameras. It provides a stable platform for camera placement, ensuring optimal surveillance coverage and protection from environmental elements.

Figure 1: Hanwha SBP-122HMW Security Camera Mount and Housing. This image shows the complete assembly of the mount and housing unit, highlighting its design for camera integration.

3. Package Contents

Verify that all components are present in the package before proceeding with installation:

• SBP-122HMW Mount and Housing Unit
• Mounting Screws and Anchors
• Installation Template (if applicable)
• Quick Start Guide

4. Safety Information

Please observe the following safety precautions:

• Ensure the mounting surface can support the weight of the mount, housing, and camera.
• Use appropriate tools for installation.
• Disconnect power to any associated electrical components before installation or maintenance.
• Avoid contact with sharp edges during handling.
• Keep out of reach of children.

5. Setup and Installation

Follow these steps for proper installation:

1. Prepare the Mounting Surface: Choose a sturdy location suitable for the camera's field of view. Ensure the surface is clean and dry.
2. Mark Drilling Points: Use the provided template (if available) or the mount itself to mark the drilling points on the wall or ceiling.
3. Drill Holes: Drill pilot holes at the marked locations. Insert wall anchors if necessary for your mounting surface.
4. Attach the Mount: Securely fasten the SBP-122HMW mount to the surface using the provided screws. Ensure it is firmly attached and stable.
5. Install the Camera: Follow your camera's specific instructions to install it within the SBP-122HMW housing. Connect any necessary cables.
6. Adjust Camera Angle: Once the camera is secured, adjust its angle and orientation for optimal coverage. Tighten all adjustment screws to lock the position.

6. Operating Instructions

The SBP-122HMW is a passive mounting and housing unit. Its primary function is to provide a stable and protective enclosure for your security camera. Operation primarily involves ensuring the camera is correctly positioned and secured.

• Angle Adjustment: Loosen the adjustment screws on the mount to change the camera's viewing angle. Re-tighten securely once the desired angle is achieved.
• Cable Management: Ensure all cables are routed properly through the designated openings to prevent damage and maintain weather resistance.

7. Maintenance

Regular maintenance helps ensure the longevity and performance of your SBP-122HMW mount and housing:

• Cleaning: Periodically wipe the exterior of the housing with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Inspection: Annually inspect all mounting screws and connections to ensure they remain tight. Check for any signs of wear, corrosion, or damage to the housing.
• Weather Seals: Ensure all weather seals (if applicable) are intact and free from cracks or damage to maintain environmental protection for the camera.

8. Troubleshooting

If you encounter issues, refer to the following common troubleshooting steps:

• Mount is Loose: Re-tighten all mounting screws. Ensure the mounting surface is stable and appropriate anchors were used.
• Camera View Obstructed: Check for any debris on the housing's transparent cover or adjust the camera's position.
• Water/Moisture Inside Housing: Inspect all seals and cable entry points for damage. Ensure cables are properly sealed.

For issues related to the camera itself, refer to the camera's specific user manual.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the official HANWHA website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Note: Specific warranty terms may vary by region and retailer.