Introduction
The Shark NV586 Navigator Powered Lift-Away Upright Vacuum is engineered for effective cleaning across various floor types and hard-to-reach areas. This manual provides detailed instructions for assembling, operating, maintaining, and troubleshooting your vacuum cleaner to ensure optimal performance and longevity.
Key features include a versatile Powered Lift-Away design for portable cleaning, advanced swivel steering for maneuverability, powerful LED headlights to illuminate hidden debris, and specialized cleaning capabilities for deep carpets and gentle bare floors.
Figure 1: Shark NV586 Navigator Powered Lift-Away Upright Vacuum main unit.
Product Components
Your Shark NV586 vacuum comes with several components designed to enhance your cleaning experience. Familiarize yourself with each part before assembly and operation.
- Main Vacuum Unit: Includes the motor, dust cup, and handle assembly.
- Floor Nozzle: Equipped with a brush roll and LED headlights for floor cleaning.
- Lift-Away Pod: Detachable canister for portable cleaning.
- Hose: Flexible hose for extended reach with attachments.
- Extension Wand: Provides additional reach for high or low areas.
- Duster Crevice Tool: Ideal for cleaning tight spaces and corners.
- Upholstery Tool: Designed for removing pet hair and debris from upholstered surfaces.
Figure 2: Included accessories: Duster Crevice Tool and Upholstery Tool.
Figure 3: Overview of Shark NV586 key features.
Setup and Assembly
Follow these steps to assemble your Shark NV586 vacuum cleaner:
- Insert the main vacuum unit onto the floor nozzle until it clicks securely into place.
- Slide the extension wand onto the main unit's connection point until it locks.
- Attach the handle assembly to the top of the extension wand, ensuring it clicks into place.
- Connect the flexible hose to the back of the main vacuum unit.
- Store the Duster Crevice Tool and Upholstery Tool on the onboard accessory posts.
- Wrap the power cord around the cord hooks for tidy storage.
Operating Instructions
Your Shark NV586 offers versatile cleaning modes for different surfaces.
Power and Surface Settings
The power switch is located on the main unit. Select the appropriate setting for your cleaning task:
- OFF: Turns off the vacuum.
- Bare Floor: Provides suction only for delicate surfaces without brush roll rotation.
- Brushroll On: Activates the brush roll for deep cleaning carpets and rugs.
Figure 4: The Shark NV586 provides powerful suction for deep cleaning carpets and bare floors.
Lift-Away Mode
The Powered Lift-Away feature allows you to detach the canister from the floor nozzle for portable cleaning. This is ideal for stairs, upholstery, and hard-to-reach areas.
- Press the "Lift-Away" button on the main unit to release the canister.
- Use the handle or the extension wand with desired attachments for cleaning.
- To reattach, align the canister with the floor nozzle and push down until it clicks.
Figure 5: Detach the Lift-Away pod for easy cleaning under furniture.
Figure 6: The Upholstery Tool is effective for pet hair pickup in Lift-Away mode.
Figure 7: Extend your reach to clean high areas above the floor using Lift-Away technology.
Suction Control
Adjust the suction power using the control dial on the handle. This allows you to optimize suction for different tasks, from delicate curtains to heavily soiled carpets.
LED Headlights
The powerful LED headlights on the floor nozzle illuminate hidden debris and dust, making it easier to spot dirt in dark corners and under furniture.
Maintenance
Regular maintenance ensures your Shark NV586 operates efficiently. Always unplug the vacuum before performing any maintenance.
Emptying the Dust Cup
Empty the dust cup after each use or when debris reaches the MAX FILL line.
- Press the dust cup release latch and lift the dust cup off the main unit.
- Hold the dust cup over a trash bin and press the bottom release latch to open the bottom flap.
- Close the bottom flap until it clicks.
- For thorough cleaning, you can also open the top of the dust cup by pressing the top release latch.
Figure 8: The removable dust cup empties debris in seconds.
Cleaning Filters
Rinse the foam and felt filters every 3 months, or as needed, and the HEPA filter once a year. Allow all filters to air dry completely before reinstalling.
- Remove the dust cup.
- Pull the foam and felt filters out from the top of the motor housing.
- Rinse filters with water until the water runs clear. Squeeze out excess water and let air dry for at least 24 hours.
- To access the HEPA filter, open the filter cover on the front of the motor housing. Remove the HEPA filter and rinse with water. Let air dry for at least 24 hours.
Brush Roll Maintenance
The self-cleaning brush roll minimizes hair wrap. Periodically check the brush roll for any debris or hair that may need to be removed. If necessary, use scissors to carefully cut away any wrapped hair.
Video 1: Official product overview of the Shark Navigator Powered Lift-Away Upright Vacuum - NV586, highlighting its features and functionality.
Troubleshooting
If your Shark NV586 is not performing as expected, consult the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum not picking up debris. | Dust cup is full; filters are dirty; hose or nozzle is clogged. | Empty dust cup; clean filters; check hose and nozzle for blockages. |
| Brush roll not spinning. | Brush roll is jammed; surface setting is incorrect. | Clear any obstructions from the brush roll; ensure "Brushroll On" setting is selected. |
| Vacuum turns off on its own. | Overheating due to clogged filters or blockages. | Check and clean all filters; clear any blockages in the hose, nozzle, or attachments. Allow unit to cool for 45 minutes. |
Specifications
- Brand: Shark
- Model Number: NV586
- Special Feature: HEPA filtration
- Filter Type: Foam
- Form Factor: Upright, Powered Lift-Away
- Recommended Uses: Carpet, Hard Floor, Tile Floor, Hardwood, Bare Floor
- Is Cordless?: No
- Amperage: 9.5 Amps
- Item Weight: 18.21 pounds
- Control Method: Push Button, Touch
- Indoor/Outdoor Usage: Indoor
Warranty and Support
This Shark NV586 vacuum cleaner comes with a 90-day limited warranty. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official Shark website.
For additional assistance, frequently asked questions, and replacement parts, please visit the SharkClean website.