1. Introduction
Thank you for choosing the EverBrite Mini LED Flashlight. This compact and lightweight flashlight is designed for various uses, including reading, camping, and general illumination in low-light conditions. Its soft yellow light provides comfortable visibility, and its durable plastic construction ensures longevity.
This manual provides essential information for the safe and efficient use of your flashlight. Please read it thoroughly before first use and keep it for future reference.
2. Safety Information
- Battery Safety: Always insert batteries correctly, observing polarity (+/-). Do not mix old and new batteries, or different types of batteries. Remove batteries if the flashlight will not be used for an extended period to prevent leakage.
- Choking Hazard: This product contains small parts (batteries). Keep out of reach of small children to prevent accidental ingestion.
- Eye Protection: Do not shine the light directly into eyes, as it may cause temporary vision impairment.
- Water Resistance: This flashlight is not waterproof. Avoid exposure to water or high humidity.
- Disassembly: Do not attempt to disassemble or modify the flashlight. This will void the warranty and may cause damage or injury.
3. Package Contents
Upon opening your EverBrite Mini LED Flashlight package, you should find the following items:
- 1 x EverBrite Mini LED Flashlight (Blue)
- 3 x AAA Alkaline Batteries
If any items are missing or damaged, please contact customer support immediately.
4. Setup: Battery Installation
Your EverBrite Mini LED Flashlight requires 3 AAA batteries (included) for operation. Follow these steps to install them:
- Unscrew the tail cap of the flashlight by turning it counter-clockwise.
- Locate the battery holder inside the flashlight body.
- Insert the 3 AAA batteries into the battery holder, ensuring the positive (+) and negative (-) terminals match the markings on the holder.
- Carefully slide the battery holder into the flashlight body. Ensure the metal bar on the battery holder aligns with the U-shaped groove inside the flashlight body. This is crucial for proper contact and to prevent short-circuiting.
- Screw the tail cap back onto the flashlight by turning it clockwise until it is securely tightened.
Image: Detailed view of battery installation, showing the battery holder and the U-groove for correct alignment.
Image: Components of the flashlight, including the battery holder and 3 AAA batteries.
5. Operating Instructions
The EverBrite Mini LED Flashlight features a simple one-switch operation:
- To Turn On: Locate the yellow switch on the side of the flashlight. Push the switch forward (towards the head of the flashlight) until it clicks into the 'ON' position. The LED light will illuminate.
- To Turn Off: Push the yellow switch backward (towards the tail cap) until it clicks into the 'OFF' position. The LED light will turn off.
Image: Visual guide for operating the ON/OFF switch.
6. Maintenance
To ensure the longevity and optimal performance of your EverBrite Mini LED Flashlight, follow these maintenance guidelines:
- Cleaning: Wipe the flashlight body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace all three AAA batteries when the light dims significantly. Always replace with fresh, high-quality alkaline batteries.
- Storage: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for more than a month.
- Lanyard: The included lanyard can be attached to the tail cap for easy carrying or to prevent loss.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | 1. Batteries are dead or low. 2. Batteries are inserted incorrectly. 3. Battery holder is not properly aligned. | 1. Replace with new AAA batteries. 2. Check battery polarity (+/-) and reinsert. 3. Ensure the battery holder's metal bar aligns with the U-groove during insertion. |
| Light is dim. | Batteries are low. | Replace with new AAA batteries. |
| Tail cap cannot be screwed on properly. | Battery holder is not fully inserted or misaligned. | Remove the battery holder, ensure batteries are correctly placed, and reinsert, aligning the metal bar with the U-groove. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | E012048A |
| Brand | EverBrite |
| Color | Blue |
| Material | Plastic |
| Light Source Type | LED (3030 bulb) |
| Luminosity | 30 Lumens |
| Power Source | Battery Powered |
| Battery Type | 3 x AAA Alkaline (Included) |
| Voltage | 4.5 Volts |
| Wattage | 1 Watt |
| Run Time | Approximately 2 hours |
| Special Feature | Lightweight (46g) |
| Water Resistance Level | Not waterproof |
| Dimensions (Approx.) | 11.4 cm (Length) x 3.2 cm (Diameter) |
Image: Product dimensions and portability examples.
Image: Visual comparison highlighting the flashlight's lightweight nature (46g).
9. Warranty and Support
EverBrite products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official EverBrite website.
If you encounter any issues or have questions about your EverBrite Mini LED Flashlight, please contact our customer support team:
- Email: [Insert Customer Support Email Here, if available]
- Phone: [Insert Customer Support Phone Number Here, if available]
- Website: EverBrite Official Store on Amazon
Please have your model number (E012048A) and purchase date ready when contacting support.