Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Acme Lara Twin Wooden Loft Bed. Please read all instructions carefully before assembly and use to ensure safe and proper operation. Keep this manual for future reference.
Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Maximum Weight Capacity: Do not exceed the maximum weight capacity of 175 lbs (79 kg) for the top bunk.
- Age Recommendation: The top bunk is not suitable for children under 6 years of age.
- Guard Rails: Always use the guard rails on both sides of the upper bunk. Ensure they are properly installed and secured.
- Ladder Safety: Always use the ladder for entering and exiting the top bunk. Do not use the bed as a jumping surface.
- Mattress Requirements: Use only a twin-size mattress (75"L x 39"W) with a maximum thickness of 6 inches (15 cm) to ensure the guard rails are effective. The mattress surface must be at least 5 inches (12.7 cm) below the upper edge of the guard rails.
- Placement: Position the bed away from windows, cords, or other items that could pose a strangulation hazard.
- Ventilation: Ensure adequate ventilation around the bed.
- Assembly: Ensure all fasteners are securely tightened before use. Periodically check and tighten fasteners as needed.
- Chemical Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Product Overview
The Acme Lara Twin Wooden Loft Bed is designed to provide a space-saving sleeping solution with a sturdy wooden frame and a reversible ladder. The area beneath the loft bed offers versatile space for various uses.

Image 1: Full view of the assembled Acme Lara Twin Wooden Loft Bed in Navy Blue.
Key Features:
- Twin size loft bed
- Durable wooden frame construction
- Integrated slat system for mattress support (no box spring required)
- Reversible front-facing ladder for flexible room configuration
- Guard rails included for safety
Setup and Assembly Instructions
Assembly of the Acme Lara Twin Wooden Loft Bed requires two adults. Please ensure all parts are present before beginning assembly. Refer to the included hardware and parts list for identification.
Required Tools (Not Included):
- Phillips head screwdriver
- Allen wrench (often included with hardware, verify)
- Rubber mallet (optional, for gentle tapping)
Assembly Steps:
- Unpack and Identify Parts: Carefully unpack all components and hardware. Lay them out on a soft, clean surface to prevent scratches. Compare all parts against the provided parts list to ensure nothing is missing.
- Assemble Side Frames: Attach the side rails to the headboard and footboard panels using the provided bolts and nuts. Do not fully tighten bolts until the entire frame is assembled.
- Install Support Beams: Secure the long support beams between the side frames. These beams provide structural integrity to the loft bed.
- Attach Slat System: Place the wooden slats across the bed frame, ensuring even spacing. Secure each slat to the side rails using screws or pre-drilled holes. This forms the mattress support.
- Assemble and Attach Ladder: Assemble the ladder components. Determine the desired placement for the ladder (left or right side of the bed) and securely attach it to the bed frame using the designated hardware.
- Install Guard Rails: Attach the guard rails to the top bunk frame, ensuring they are firmly secured on all sides where required.
- Final Tightening: Once all components are assembled, go back and securely tighten all bolts and fasteners. Do not overtighten.
- Placement: Carefully move the assembled bed to its final desired location.

Image 2: View of the bed frame with the slat system installed, providing mattress support.

Image 3: Close-up view of the ladder securely attached to the loft bed frame.
Operating Instructions
The Acme Lara Twin Wooden Loft Bed is designed for sleeping and provides an elevated sleeping surface. The space underneath can be utilized for storage, a play area, or an additional seating arrangement.
Using the Ladder:
- Always face the ladder when climbing up or down.
- Ensure a firm grip on the ladder rungs.
- Do not allow more than one person on the ladder at a time.
Mattress Placement:
Place a standard twin-size mattress (75"L x 39"W) on the slat system. Ensure the mattress thickness does not exceed 6 inches (15 cm) to maintain the effectiveness of the guard rails.
Maintenance
Regular maintenance will help prolong the life and safety of your loft bed.
Cleaning:
- Wipe surfaces with a soft, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Dry immediately with a clean cloth.
Fastener Checks:
- Periodically (e.g., every 3-6 months) check all bolts, screws, and fasteners to ensure they are tight.
- Tighten any loose fasteners to prevent wobbling or structural instability. Do not overtighten.
Troubleshooting
Bed is Wobbling:
- Ensure all assembly bolts and screws are securely tightened.
- Verify that the bed is placed on a level surface.
Squeaking Noises:
- Check and tighten all connections.
- Apply a small amount of lubricant (e.g., paraffin wax) to metal-on-wood contact points if necessary.
Missing or Damaged Parts:
- Do not attempt to assemble the bed with missing or damaged parts.
- Contact customer support immediately for replacement parts.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 38260 |
| Brand | Acme |
| Size | Twin Loft |
| Product Dimensions (L x W x H) | 78"L x 41"W x 43"H |
| Material | Wood |
| Color | Navy Blue |
| Item Weight | 75 pounds |
| Assembly Required | Yes |
| Compatible Mattress Size | Twin |
Warranty Information
For specific warranty details regarding your Acme Lara Twin Wooden Loft Bed, please refer to the warranty documentation included with your purchase or contact Acme Furniture directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Acme Furniture customer service. Have your model number (38260) and purchase information ready when you call.
You may also visit the official Acme Furniture website for additional support resources or to locate contact information:





