Introduction
The Lexon Mina L is a cordless, rechargeable LED table lamp designed for versatile use in various indoor and outdoor settings. It features multiple LED color options, dimmable light, and touch control for ease of use. This manual provides essential information for the proper setup, operation, and maintenance of your Mina L lamp.
Image: The Lexon Mina L Mushroom Lamp, showcasing its design and dark red finish.
Product Features
- Compact and Stylish Design: The Mina L lamp offers a sleek, space-saving design suitable for various environments.
- 9 LED Color Options: Choose from a range of 9 LED light colors to create your desired ambiance.
- Touch Activation: Easily control the lamp's settings with a simple touch on the top surface.
- Cordless and Portable: Designed for mobility, this lamp is lightweight and operates wirelessly.
- Rechargeable Battery: Equipped with a long-lasting battery, providing up to 24 hours of light on a single charge.
- USB-C and Wireless Charging: Offers flexible charging options for convenience.
- Water Resistant: Suitable for both indoor and outdoor use, with a water-resistant rating.
- Dimmable Light: Adjust the brightness to suit your needs.
Image: Visual representation of key features including battery life, charging methods, and water resistance.
Setup
- Unpack: Carefully remove the Lexon Mina L lamp from its packaging.
- Initial Charge: Before first use, fully charge the lamp. Connect the provided USB-C cable to the lamp's charging port and to a compatible USB power adapter (not included). Alternatively, place the lamp on a compatible wireless charging pad. A full charge takes approximately 2 hours.
- Placement: Place the lamp on a stable, flat surface. Ensure it is not exposed to extreme temperatures or direct sunlight for prolonged periods.
Image: The Mina L lamp positioned on a bedside table, demonstrating wireless charging capability.
Operating Instructions
Power On/Off and Color Selection
The Mina L lamp is controlled by a touch sensor located on the top surface of the lamp.
- To Turn On: Lightly tap the top of the lamp once. The lamp will illuminate with the last used color setting.
- To Change Color: While the lamp is on, tap the top surface repeatedly to cycle through the 9 available LED colors.
- To Turn Off: Continue tapping through all colors until the lamp turns off, or press and hold the top surface for a few seconds.
Dimming Function
To adjust the brightness of the light:
- While the lamp is on and displaying your desired color, press and hold the top surface. The light will gradually dim or brighten. Release your finger when the desired brightness level is reached.
Image: A hand demonstrating the touch control feature on the lamp's top surface to change between 9 LED colors.
Image: A collection of Mina L lamps showcasing the diverse color options and finishes.
Charging
The Lexon Mina L lamp is equipped with a rechargeable battery that provides up to 24 hours of continuous light, depending on the brightness and color settings. It supports two charging methods:
- USB-C Charging: Connect the included USB-C cable to the lamp's charging port and to a standard USB power adapter (5V/1A recommended).
- Wireless Charging: Place the lamp on any Qi-compatible wireless charging pad. Ensure the lamp is centered on the charging pad for optimal connection.
A full charge typically takes about 2 hours. The charging indicator (if present, refer to product diagram) will show the charging status.
Maintenance
- Cleaning: Wipe the lamp with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Water Resistance: The Mina L lamp is water resistant, making it suitable for outdoor use. However, it is not fully waterproof; avoid submerging it in water.
- Storage: When not in use for extended periods, store the lamp in a cool, dry place. It is recommended to fully charge the battery before storing to prolong its lifespan.
- Battery Care: To maintain battery health, avoid completely draining the battery frequently. Recharge when the light starts to dim noticeably.
Image: The Mina L lamp on an outdoor surface with water droplets, illustrating its water-resistant design.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp using the USB-C cable or a wireless charger. |
| Lamp does not charge. | Loose cable connection; incompatible charger; lamp not centered on wireless charger. | Ensure USB-C cable is securely connected. Use a compatible 5V/1A USB adapter. For wireless charging, reposition the lamp on the charging pad. |
| Cannot change colors or dim the light. | Incorrect touch gesture; temporary software glitch. | Ensure you are tapping/holding the top surface correctly. Try turning the lamp off and on again. |
| Light is dim or flickers. | Low battery. | Recharge the lamp. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LH65DR |
| Brand | Lexon |
| Dimensions (D x W x H) | 6"D x 6"W x 7"H |
| Item Weight | 322 Grams |
| Base Material | Aluminum |
| Light Source Type | LED |
| Number of Light Sources | 9 (colors) |
| Power Source | Battery Powered |
| Charging | USB-C, Wireless Charging |
| Battery Life | Up to 24 hours |
| Control Method | Touch |
| Water Resistance Level | Water Resistant |
| Included Components | Battery (integrated) |
Image: A size comparison chart showing the Mina L lamp alongside smaller Mina models, with their respective dimensions.
Official Product Videos
Portable Lamp Large MINA L by Lexon
Video: An official video from Lexon Design USA showcasing the features and portability of the large Mina L lamp.
Lexon Mina L Overview
Video: An overview of the Lexon Mina L lamp, provided by T5Mart, demonstrating its functionality.
Warranty and Support
For warranty information and customer support, please refer to the official Lexon website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
You can also visit the Lexon Store on Amazon for additional product information and support resources.
