Vremi Smart Pet Feeder Instruction Manual

Introduction

The Vremi Smart Pet Feeder is an automatic dry food dispenser designed for cats and dogs. It allows for programmable meal times and portions, ensuring your pet receives consistent feeding. This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your pet feeder.

Key features include a large food storage capacity, programmable timer for up to four meals per day, dual power supply options, a voice recorder for personalized messages, and an LCD display for easy programming.

Product Components

• Main Feeder Unit
• Removable Food Tray
• DC Power Adapter (5V, 1A)
• Desiccant Pouch Holder (desiccant not included)
• Instruction Manual (this document)

Setup

1. Unpacking and Placement

Carefully remove all components from the packaging. Place the feeder on a flat, stable surface in a location accessible to your pet and near a power outlet if using the adapter.

Image: The Vremi Smart Pet Feeder shown with approximate dimensions (15 inches height, 14 inches width, 9 inches depth) and a 5.5L volume capacity. A small puppy is sitting next to it.

2. Power Supply Connection

The feeder can be powered by either the included DC power adapter or three "D" size alkaline batteries (not included). For continuous operation and as a backup during power outages, it is recommended to use both.

• DC Power Adapter: Connect the adapter to the power port on the feeder and plug it into a standard wall outlet.
• Battery Installation: Open the battery compartment on the bottom of the feeder. Insert three "D" size alkaline batteries, ensuring correct polarity. Close the compartment securely.

Image: The underside of the Vremi Smart Pet Feeder showing the open battery compartment for three D-size batteries and the connection point for the DC power adapter, illustrating the dual power supply feature.

3. Filling the Food Hopper

Open the lid of the feeder. Pour dry pet food into the hopper. The feeder has a 6-liter capacity. Ensure the lid is securely latched after filling to maintain food freshness and prevent spills.

Image: A cat looking at the Vremi Smart Pet Feeder, highlighting the secure latch on top and the transparent viewing window on the front, which allows users to easily monitor food levels.

Operating Instructions

1. Setting the Clock

Press and hold the "CLOCK" button. While holding, use the "HOUR" and "MIN" buttons to set the current time. Release the "CLOCK" button to save.

2. Programming Meal Times and Portions

The feeder allows for up to four daily meals. Each meal can have a customized portion size.

Image: A close-up of the Vremi Smart Pet Feeder's control panel, showing the LCD display and buttons for setting meal times (1st, 2nd, 3rd, 4th), meal size, hour, minute, record, and play functions. A small dog is visible at the top.

1. Press the "1ST" button to program the first meal. The meal time will flash.
2. Use the "HOUR" and "MIN" buttons to set the desired feeding time for the first meal.
3. Press the "MEAL SIZE" button to adjust the portion size. Portion sizes range from 1 to 39, where 1 portion equals approximately 10 grams.
4. Repeat steps 1-3 for "2ND", "3RD", and "4TH" meals as needed. If a meal is not required, ensure its setting is "Off".
5. To turn a meal on or off, press the corresponding meal button (e.g., "1ST") and then the "ON/OFF" button.

Image: The Vremi Smart Pet Feeder illustrating its capability for up to 4 daily meals and 39 portion size settings, with 1 portion equivalent to 10 grams. A cat's paw with a watch is shown, symbolizing timed feeding.

3. Voice Recording Feature

You can record a 10-second personalized message that will play during each feeding time.

1. Press and hold the "RECORD" button. Speak your message clearly into the microphone.
2. Release the "RECORD" button when finished.
3. Press the "PLAY" button to listen to your recorded message.

Image: A small dog looking up, with a speech bubble indicating a recorded message ("Yeah. My Name's Kitty. What's It To Ya?") and a speaker icon, demonstrating the voice recording feature of the Vremi Smart Pet Feeder.

4. Manual Feeding

To dispense food manually, press and hold the "MANUAL FEED" button. Food will be dispensed as long as the button is held, allowing for impromptu snacks.

Maintenance

1. Cleaning the Food Tray

The removable food tray is dishwasher safe for convenient cleaning. Regularly clean the tray to maintain hygiene.

Image: A small dog holding the removable food tray of the Vremi Smart Pet Feeder, which is being placed into a dishwasher, illustrating its dishwasher-safe and BPA-free properties.

2. Cleaning the Main Unit

Wipe the main unit with a soft, damp cloth. Do not immerse the main unit in water or use abrasive cleaners.

3. Desiccant Pouch Holder

The feeder includes a desiccant pouch holder to help keep pet food fresh. Replace the desiccant pouch periodically as needed (desiccant not included).

Troubleshooting

Food Not Dispensing

• Check Food Level: Ensure there is sufficient dry food in the hopper.
• Infrared Detection: The feeder features infrared detection to prevent food from getting stuck. If food is jammed, gently clear the dispenser opening.

Image: A cat looking into the food tray of the Vremi Smart Pet Feeder, with a red glow indicating the infrared detection system at work, designed to prevent food from getting stuck during dispensing.
• Power Supply: Verify that the power adapter is securely connected or that the batteries have sufficient charge. The dual power supply ensures operation even during power outages.
• Programming: Double-check that meal times are correctly set and the meal function is "On".

Display Not Working / Feeder Unresponsive

• Power Check: Ensure the feeder is receiving power from either the adapter or batteries. Replace batteries if necessary.
• Reset: If the feeder is unresponsive, disconnect both the power adapter and remove the batteries for a few minutes, then reconnect.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Vremi customer service. Keep your purchase receipt for warranty claims.

For further assistance, please visit the official Vremi website or contact their support channels.