Polk Audio SR2 Wireless Surround Sound Speakers Instruction Manual

Introduction

The Polk Audio SR2 Wireless Surround Sound Speakers are designed to seamlessly integrate with compatible Polk React and Magnifi Sound Bar Systems, transforming your audio setup into a full 5.1 channel home theater experience. These speakers eliminate the need for extensive wiring, offering a convenient and powerful audio upgrade. Each speaker features custom-tuned drivers to deliver precise and immersive sound.

This manual provides essential information for the proper setup, operation, and maintenance of your SR2 speakers, ensuring optimal performance and longevity.

What's in the Box

Please verify that all items listed below are included in your package:

• 2 x Polk Audio SR2 Speakers
• 2 x Power Supply Cords
• 1 x Quick Start Guide
• 1 x Registration Card

Image: The two Polk Audio SR2 speakers included in the package, shown from the front with their fabric grilles.

Setup

Compatibility

The Polk Audio SR2 Wireless Surround Sound Speakers are exclusively compatible with select Polk sound bars, including the Polk React, Magnifi 2, Magnifi, and React series sound bars. Ensure your sound bar is one of these models for proper functionality.

Image: A visual guide illustrating the compatible Polk sound bar models for the SR2 speakers.

Placement Options

The SR2 speakers offer flexible placement options. They can be placed on a shelf or mounted on a wall. Each speaker is clearly labeled as either "Left" or "Right" to ensure correct channel assignment and balanced surround sound. For wall mounting, use the included template.

• Shelf Placement: Position the speakers behind or to the sides of your primary listening area, ensuring they are at approximately ear level when seated.
• Wall Mounting: Utilize the keyhole slot on the back of each speaker for secure wall mounting. Ensure the mounting surface is sturdy and use appropriate hardware (not included) for your wall type.

Image: Example of SR2 speakers positioned on a surface behind the main listening area, complementing a soundbar and TV.

Image: A single SR2 speaker placed on a side table, illustrating a common placement for surround sound.

Wireless Connection

The SR2 speakers connect wirelessly to your compatible Polk sound bar. Follow these steps for a quick setup:

1. Power On: Connect each SR2 speaker to a power outlet using the provided power supply cords. The power indicator light on the back of the speaker should illuminate.
2. Initiate Pairing (Speakers): On the back of each SR2 speaker, locate and press the "CONNECT" button. The indicator light may flash, indicating pairing mode.
3. Initiate Pairing (Sound Bar): Refer to your Polk sound bar's manual for instructions on how to put it into pairing mode for surround speakers. Typically, this involves pressing a "Connect" or "Pair" button on the sound bar or its remote.
4. Confirm Connection: Once successfully paired, the indicator lights on both the SR2 speakers and the sound bar will change to a solid color, indicating a stable wireless connection.

Image: The rear panel of an SR2 speaker, highlighting the power input and the "CONNECT" button for wireless pairing.

Operating

Once connected, your SR2 speakers will function as part of your 5.1 channel surround sound system, enhancing audio from compatible sources.

• Audio Output: The SR2 speakers provide surround audio output, primarily delivering ambient sounds and effects for an immersive experience during movies and music playback.
• Volume Control: The volume of the SR2 speakers is typically controlled through your connected Polk sound bar's remote or interface. Some sound bars may offer independent rear speaker level adjustments. Refer to your sound bar's manual for specific controls.
• Built-in Amplification: Each SR2 speaker is equipped with a powerful, custom-tuned 3-inch driver and built-in amplification, ensuring clear and dynamic sound reproduction.

Maintenance

To ensure the longevity and optimal performance of your Polk Audio SR2 speakers, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to gently wipe the speaker cabinets. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
• Grille Care: The fabric grilles can be gently vacuumed with a soft brush attachment to remove dust. Do not attempt to remove the grilles forcefully.
• Placement Environment: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the speakers.
• Power Disconnection: If the speakers will not be used for an extended period, it is advisable to unplug them from the power outlet.

Troubleshooting

If you encounter issues with your SR2 speakers, refer to the following common troubleshooting steps:

No Sound from Speakers / Speakers Not Pairing

• Check Power: Ensure both SR2 speakers are properly plugged into a working power outlet and their power indicator lights are on.
• Verify Compatibility: Confirm that your sound bar is one of the compatible Polk models (React, Magnifi 2, Magnifi, React series). The SR2 speakers are not universally compatible with all sound bars.
• Re-initiate Pairing:
  1. Unplug both SR2 speakers and your sound bar from power for 30 seconds.
  2. Plug in your sound bar first, then the SR2 speakers.
  3. Follow the wireless connection steps outlined in the "Setup" section: press the "CONNECT" button on each SR2 speaker, then activate pairing mode on your sound bar.
• Distance and Obstructions: Ensure the speakers are within range of the sound bar and there are no significant physical obstructions (e.g., large metal objects) that could interfere with the wireless signal.

Subtle or No Surround Sound Effects

• Source Material: Surround sound effects are dependent on the audio source. Ensure you are playing content (movies, TV shows) that has a 5.1 channel audio track. Standard stereo content will not produce distinct surround effects from the rear speakers.
• Sound Bar Settings: Check your sound bar's settings. Many sound bars have different audio modes (e.g., Stereo, Movie, Music, Surround). Select a mode that enables surround sound processing. Some sound bars also allow you to adjust the individual volume level of the rear speakers.
• Speaker Placement: Review the placement of your SR2 speakers. Incorrect placement can diminish the perceived surround effect.

Specifications

Image: Detailed dimensions of a single SR2 speaker.

Warranty and Support

The Polk Audio SR2 Wireless Surround Sound Speakers come with a Limited Warranty. Please refer to the included Registration Card or visit the official Polk Audio website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Polk Audio customer service. Contact information can typically be found on the Polk Audio website or on your product registration card.

Online Resources: For additional support and FAQs, visit the official Polk Audio support page: www.polkaudio.com/support