ICECO YCD99 99-Liter Portable Compressor Refrigerator/Freezer User Manual

1. Introduction

The ICECO YCD99 is a versatile 99-liter portable compressor refrigerator and freezer designed for both indoor and outdoor use. It operates efficiently on multiple power sources, including 12V/24V DC from vehicles and 220V AC mains power. This manual provides comprehensive instructions for the safe and effective operation, setup, maintenance, and troubleshooting of your ICECO YCD99 unit.

Figure 1: ICECO YCD99 Refrigerator/Freezer Overview

This image displays the ICECO YCD99 portable refrigerator/freezer in a gray finish, featuring its prominent ICECO branding and a digital control panel on the front. The robust design includes sturdy latches and handles, indicating its suitability for outdoor and mobile environments.

2. Safety Information

Please read all safety warnings and instructions carefully before using the appliance to prevent injury or damage.

• Ensure proper ventilation around the unit. Do not block ventilation openings.
• Do not operate the appliance if the power cord or plug is damaged.
• Keep the appliance away from heat sources and direct sunlight.
• Do not immerse the appliance in water or other liquids.
• Only use the specified power adapters and cables provided with the unit.
• Avoid touching internal components, especially when the unit is operating.
• Unplug the unit before cleaning or performing any maintenance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Product Features

The ICECO YCD99 is equipped with advanced features for optimal performance and user convenience:

• Dual Power Compatibility: Operates on 12V/24V DC (vehicle cigarette lighter) and 220V AC (mains power).
• Large Capacity: 99-liter single-compartment design for ample storage.
• Wide Temperature Range: Capable of cooling and freezing from -18°C to +10°C, independent of ambient temperature.
• Fast Cooling: Achieves 0°C from room temperature in approximately 15 minutes.
• Digital Control Panel: High-precision LED-illuminated display for clear and easy temperature setting, battery voltage monitoring, and unit status.
• Temperature Unit Selection: Switch between Celsius (°C) and Fahrenheit (°F).
• ECO and MAX Modes: Choose ECO for energy efficiency or MAX for rapid cooling/freezing.
• Internal LED Lighting: Provides visibility inside the compartment, even in low-light conditions.
• Removable Basket: Prevents items from sticking to walls and improves air circulation for faster cooling.
• Superior Insulation: Special insulation and polyurethane casing minimize heat loss, maintaining temperature for up to 72 hours when off.
• Quiet and Vibration-Free Operation: Advanced compressor technology ensures smooth and silent performance.
• Smart Battery Protection: Integrated micro-computer automatically shuts off the unit if vehicle battery voltage drops, preventing damage, and restarts when voltage normalizes.
• Mobile App Control: Bluetooth connectivity allows control of settings (temperature, battery protection, on/off) via the "CAR FRIDGE" app on Android or iOS devices.
• Durable Construction: Shock-resistant, UV-resistant ABS body and lids with robust hinges and locking mechanisms.
• Portable Design: Features double-sided carrying handles with an auto-closing mechanism for easy transport.
• Easy Cleaning: Smooth, easy-to-clean interior walls and drainage plugs for melted ice water.

Figure 2: Key Features of ICECO YCD99

This diagram illustrates various key features of the ICECO YCD99, including the internal LED light, removable storage basket, digital control panel, mobile app connectivity icons (Apple and Android), durable corner protectors, a steel latch for secure closure, and a spring-loaded handle design for comfortable carrying.

Figure 3: Shock Resistance and Durability

This image highlights the shock-resistant design of the ICECO YCD99, showing the unit alongside an illustration of a Jeep traversing rough terrain. It emphasizes the product's ability to withstand impacts and vibrations, with a specific mention of 40-degree impact resistance for its compressor, making it suitable for off-road and mobile applications.

4. Setup

4.1 Unpacking and Placement

• Carefully remove the appliance from its packaging.
• Place the refrigerator/freezer on a flat, stable surface. Ensure adequate ventilation around the unit (at least 10 cm clearance on all sides).
• Avoid placing the unit in direct sunlight or near heat sources.

4.2 Power Connection

The ICECO YCD99 supports both DC and AC power inputs.

• DC Power (12V/24V): Connect the DC power cable to the unit's DC input port and then to your vehicle's cigarette lighter socket. Ensure the vehicle's engine is running or the battery has sufficient charge to prevent discharge.
• AC Power (220V): Connect the AC power adapter to the unit's AC input port and then plug it into a standard 220V wall outlet.
• Do not connect both AC and DC power simultaneously. The unit will prioritize AC power if both are connected.

Figure 4: Placement in a Vehicle

This image shows the ICECO YCD99 refrigerator/freezer neatly placed within the interior of a camper van, illustrating its suitability for mobile living spaces. The compact design allows it to fit into custom built-in areas, making it an ideal appliance for road trips and camping.

5. Operating Instructions

5.1 Powering On/Off

Press and hold the power button on the digital control panel to turn the unit on or off.

5.2 Setting Temperature

• Once powered on, the digital display will show the current internal temperature.
• Use the + and - buttons to adjust the desired temperature. The display will flash the set temperature and then return to the current temperature.
• To switch between Celsius (°C) and Fahrenheit (°F), refer to the specific instructions in your unit's quick start guide or the mobile app.

5.3 ECO and MAX Modes

The unit offers two operating modes:

• ECO Mode: For energy-efficient operation, suitable for maintaining temperature over long periods.
• MAX Mode: For rapid cooling or freezing, ideal when you need to quickly reach the desired temperature.
• Press the mode button (often indicated by a gear or 'M' icon) to toggle between ECO and MAX modes.

5.4 Battery Protection Settings

The integrated battery protection system prevents excessive discharge of your vehicle's battery. You can typically select from three levels (High, Medium, Low) to adjust the cut-off voltage:

• High: Highest cut-off voltage, provides maximum battery protection. Recommended for starting batteries.
• Medium: Balanced protection.
• Low: Lowest cut-off voltage, allows for longer operation but less battery protection. Recommended for deep cycle batteries.
• Refer to your unit's specific instructions for how to change the battery protection level via the control panel or mobile app.

5.5 Mobile App Control

Download the "CAR FRIDGE" app from your device's app store (Android or iOS). Enable Bluetooth on your phone and follow the app's instructions to pair with your ICECO YCD99. The app allows you to:

• Monitor the current temperature.
• Adjust the target temperature.
• Switch between ECO and MAX modes.
• Set battery protection levels.
• Turn the unit on or off remotely.

6. Maintenance

6.1 Cleaning

• Always unplug the unit before cleaning.
• Clean the interior with a soft cloth dampened with mild detergent and warm water. Do not use abrasive cleaners or harsh chemicals.
• Wipe the exterior with a soft, damp cloth.
• Ensure all surfaces are dry before reconnecting power.

6.2 Defrosting and Drainage

• If ice builds up inside, turn off the unit and allow the ice to melt naturally.
• The unit is equipped with drainage plugs for easy removal of melted ice water. Open the plug to drain the water.
• After draining, wipe the interior dry to prevent odors and mold.

6.3 Storage

When storing the unit for an extended period, ensure it is clean, dry, and unplugged. Store in a cool, dry place with the lid slightly ajar to prevent odors.

7. Troubleshooting

If you encounter issues with your ICECO YCD99, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact ICECO customer support.

8. Specifications

Figure 5: Product Dimensions and Internal Layout

This technical drawing provides detailed external dimensions (920mm length, 520mm width, 465mm height) and an internal schematic of the ICECO YCD99 refrigerator/freezer. It shows the single compartment layout and the placement of the compressor unit, aiding in understanding the internal volume and space utilization.

9. Warranty and Support

9.1 Warranty Information

The ICECO YCD99 comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For technical assistance, warranty claims, or any questions regarding your ICECO YCD99, please contact ICECO customer support through their official website or the retailer from whom you purchased the product. Provide your model number (YCD99) and a detailed description of the issue for faster service.

You can visit the ICECO Store on Amazon for more information: ICECO Store