1. Introduction
This manual provides detailed instructions for the ABZXT Solar Pendant Lights, Dual Lamp model B08MTXDHVS. This product is designed to provide efficient and reliable outdoor lighting using solar power, featuring IP65 waterproofing, dusk-to-dawn automatic operation, and remote control functionality. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
2. Package Contents
Verify that all components listed below are included in your package:
- 1 x Solar Panel (3.5W/5.5V)
- 2 x LED Pendant Lamps (16 LEDs each, 5.9 inches L x 2.4 inches W)
- 2 x Remote Controllers
- 3 x Extension Cables (9.8 ft / 3M each)
- 1 x Mounting Bracket for Solar Panel
- 1 x Set of Screws and Wall Plugs for Installation

Image 2.1: Overview of the ABZXT Solar Pendant Lights components.
Video 2.1: Unboxing and component overview of the solar pendant lights.
3. Setup and Installation
Follow these steps for proper installation of your solar pendant lights:
3.1 Solar Panel Placement
The solar panel must be installed outdoors in a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging. Avoid shaded areas from trees, buildings, or other obstructions.
- Mark the desired mounting location for the solar panel bracket on a wall or suitable surface.
- Drill pilot holes and secure the mounting bracket using the provided screws and wall plugs.
- Attach the solar panel to the bracket, ensuring it can be adjusted to face the sun for maximum exposure. The panel is adjustable up to 180 degrees.

Image 3.1: Example of solar panel installation on an exterior wall.
Video 3.2: Step-by-step guide for mounting the solar panel.
3.2 Lamp Installation
The pendant lamps can be hung indoors or outdoors, such as under a shed, barn, chicken coop, or tent. They are IP65 waterproof, suitable for various weather conditions.
- Choose desired locations for the two pendant lamps.
- Use the integrated hooks on the lamps to hang them securely.
- Connect the extension cables to the lamps and then to the solar panel. The waterproof connectors ensure a secure and weather-resistant connection.

Image 3.3: Detailed view of components and connections.
Video 3.4: Demonstrating the connection of the lamps to the solar panel.
3.3 Initial Activation
Before first use, ensure the switch on the back of the solar panel is in the "ON" position. Allow the solar panel to charge for a full day in direct sunlight before initial operation.
4. Operating Instructions
4.1 Automatic Dusk-to-Dawn Operation
Once the solar panel switch is "ON" and the lights are powered on via the remote controller, the dual head solar lights will automatically illuminate at dusk and turn off at dawn, provided there is sufficient charge.
4.2 Remote Control Functions
The included remote controller allows for manual operation and adjustment of the lights:
- ON/OFF: Manually turn the lights on or off.
- Brightness Adjustment: Adjust between 5 brightness levels (UP/DOWN buttons).
- Timer Function: Set the lights to turn off after 3, 5, or 8 hours.
- AUTO: Activates the dusk-to-dawn sensor for automatic operation.
Note:
- To operate the lights during the daytime, you must first cover the solar panel to simulate darkness, then use the remote controller to turn them on.
- Ensure the remote control has working batteries.

Image 4.1: Remote control functions and system overview.
Video 4.2: Demonstration of remote control brightness adjustment.
5. Maintenance
- Solar Panel Cleaning: Regularly clean the surface of the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Battery Care: The integrated lithium-ion battery is designed for long life. For optimal performance, ensure the unit receives adequate sunlight for charging.
- Waterproofing: The lights are IP65 waterproof. Ensure all cable connections are secure to maintain water resistance.

Image 5.1: IP65 waterproof feature of the pendant light.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on at night. |
|
|
| Lights turn off too quickly. |
|
|
| Lights do not respond to remote control. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | ABZXT |
| Model | B08MTXDHVS (Dual Lamp) |
| Solar Panel | 3.5W / 5.5V |
| Battery | 5500mAh Lithium-ion |
| LEDs per Lamp | 16 LEDs |
| Lamp Dimensions | 15cm / 5.91 inches (diameter) |
| Extension Cable Length | 3 meters / 9.8 feet (each) |
| Waterproof Rating | IP65 |
| Material | Acrylonitrile Butadiene Styrene |
| Color | Black |
| Operating Time | 8-10 hours (on full charge) |

Image 7.1: Product dimensions and component list.
8. Warranty and Support
For warranty information, technical support, or any inquiries regarding your ABZXT Solar Pendant Lights, please refer to the contact information provided with your purchase or visit the official ABZXT website. Keep your purchase receipt for warranty claims.
9. Application Scenarios
The ABZXT Solar Pendant Lights are versatile and suitable for various outdoor and semi-outdoor environments where additional lighting is needed without access to grid power. Common applications include:
- Sheds and workshops
- Barns and stables
- Chicken coops and animal pens
- Tents and temporary structures
- Patios, gazebos, and outdoor seating areas
- Garages and carports

Image 9.1: Diverse application examples for the solar pendant lights.

Image 9.2: Solar pendant lights illuminating an outdoor patio.
Video 9.3: Various outdoor applications of the solar pendant lights.
Video 9.4: Solar pendant lights illuminating garden features at night.